|
|
本帖最后由 klw3155 于 2019-8-30 08:15 编辑
砖了！！！！！192.168.1.1 ping不通 小白一个求高手指点！！！
UserName: telecomadmin
Password: ********
bldr> help
? Print out help messages.
help Print out help messages.
reset reset.
ritool ritool.
go Booting the linux kernel.
decomp Decompress kernel image to ram.
memrl <addr> Read a word from addr.
memwl <addr> <value> Write a word to addr.
dump <addr> <len> Dump memory content.
jump <addr> Jump to addr.
flash <dst> <src> <len> <oob> Write to flash from src to dst(oob: write nand oob if 1).
imginfo Show images info.
nandit <addr> Write to flash from src to dst.
nandrd <src> <len> Read flash from src.
nander <dst> <len> <oob> Erase flash from dst(oob: force erase oob if 1).
chkmem <nand> <ddr> <len> Check data between nand and ddr.
innand <dst> <src> <len> Move data from spi to nand.
bdstore <flash dst> <bin src> Do backdoor config store
bdshow Show backdoor config
bdswitch[1|0] Enable or disable backdoor function
ddrcalswitch[1|0] Enable or disable ddr calibration funciton
drambistswitch[0|1|2] disable or enable, and quick or normal test
xmdm <addr> <len> Xmodem receive to addr.
miir <phyaddr> <reg> Read ethernet phy reg.
miiw <phyaddr> <reg> <value> Write ethernet phy reg.
cpufreq <freq num> / <m> <n> Set CPU Freq <156~450>(freq has to be multiple of 6)
ipaddr <ip addr> Change modem's IP.
httpd Start Web Server
ddrdrv <..> Change DDR driving length
mtd
bldr> ritool set OperatorID SHSC
Set RI OperatorID, Please wait...
Set OperatorID=SHSC success!
bldr> ritool set Custom CM
Set RI Custom, Please wait...
the field name is error!bldr>
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有账号？注册
×
|
粤公网安备44152102000001号 
发表于 2019-8-28 09:45:59