小弟用PCTOOL刷上海贝尔Home Plus Plus 500 S6307MPW-II 开启路由功能固件后无线就不能用了,灯不亮,WEB设置里面是开启的
求各位大侠帮帮小弟,感激不尽!!
系统日志:
2002:9:8:12:0 Resolver Polling Timer Started succesfully.
2002:9:8:12:0 snmpd starts (1)
2002:9:8:12:0 NTP Polling Timer for DHCP Started succesfully.
2002:9:8:12:0 DSL Polling Timer Started succesfully.
2002:9:8:12:0 Firewall NAT service started
2002:9:8:12:0 All PVC Channel is In-Use
2002:9:8:12:0 All PVC Channel is In-Use
2002:9:8:12:0 All PVC Channel is In-Use
2002:9:8:12:0 All PVC Channel is In-Use
2002:9:8:12:0 All PVC Channel is In-Use
2002:9:8:12:0 All PVC Channel is In-Use
2002:9:8:12:0 AP REPORT LOCK ACQUIRED
2002:9:8:12:0 wlan_handle_load_event - Acquired Lock
2002:9:8:12:0 MAC address : 00:74:04:e5:75:94
2002:9:8:12:0 Bridge Created: br0
2002:9:8:12:0 Bridge Created: br1
2002:9:8:12:0 updateall_servers : No children found for conn:
2002:9:8:12:0 WPA Authenticator Started
2002:9:8:12:0 Bridge Created: br2
2002:9:8:12:0 Bridge Created: br3
2002:9:8:12:0 Bridge Created: br4
2002:9:8:12:0 Bridge Interface Added: eth0
2002:9:8:12:0 Bridge Interface Added: eth1
2002:9:8:12:0 Bridge Interface Added: eth2
2002:9:8:12:0 Bridge Interface Added: eth3
2002:9:8:12:0 tr069: Deleayed Device Info First use Date set
2002:9:8:12:0 DSL Carrier is down
2002:9:8:12:0 ERROR: NVS_TFTP_LOAD is enabled. Set TFTP Server Address using IPA_SVR env variable
2002:9:8:12:0 Read EEPROM failed
2002:9:8:12:0 Error: Failed to get a valid EEPROM Image. AP is DOWN
2002:9:8:12:0 NVS_TFTP_LOAD is enabled to download the correct EEPROM image during next boot. Set TFTP Server Address using IPA_SVR env variable
2002:9:8:12:0 AP Releasing Lock
用PCTOOL看到的env信息:
BUILD_OPS 0x301
bootloaderVersion 1.4.0.6
ProductID AR7WRD
SerialNumber none
MEMSZ 0x01000000
FLASHSZ 0x00800000
MODETTY0 9600,n,8,1,hw
MODETTY1 9600,n,8,1,hw
CPUFREQ 211968000
MIPSFREQ 211968000
SYSFREQ 105984000
PROMPT (psbl)
IPA 192.168.1.1
mtd1 0x90020090,0x9009f000
mtd0 0x9009f000,0x90800000
mtd4 0x90020000,0x90800000
HWRevision Gaw7.2Z39-4
mtd2 0x90000000,0x90010000
mtd3 0x90010000,0x90020000
BOOTCFG m:f:"mtd1"
NVS_TFTP_LOAD 1
HWA_0 00:74:04:E5:75:92
HWA_2 00:74:04:E5:75:93
HWA_3 00:74:04:E5:75:93
TR69_CR_USERNAME plugfest
TR69_CR_PASSWORD plugfest
configed 13
mtd5 0x90042000,0x90800000
Route_Enabled 1
DSL_BIT_TMODE 1
DSL_UPG_DONE 1
vcc_encaps0 0.0
vcc_encaps1 0.0
vcc_encaps2 0.0
vcc_encaps3 0.0
vcc_encaps4 0.0
vcc_encaps5 0.0
vcc_encaps6 0.0
vcc_encaps7 0.0
vlynq_polarity low
MAC_PORT 0
autoload 0
mac_ap 00:74:04:E5:75:95
cron_enable 1
configid 1
请问该怎么办?
|