请大家帮着看看为何路由不能上线!

xsx100

我用的是  大亚  DB 108  ，刷的秒针R60，
用在刚装的铁通宽带上，出现这样的信息.就是上不了线!!!
01/01/1970 00:00:00> Ethernet Device 0 Detected
01/01/1970 00:00:00> ATM: Detected
01/01/1970 00:00:00> ATM: Setting up vcc0, VPI=8, VCI=35
01/01/1970 00:00:00> Initialized Dynamic NAPT.
01/01/1970 00:00:00> Verify Firmware OK
01/01/1970 00:00:00> CfgMgr: ';Shtm.dlz'; module loaded.
01/01/1970 00:00:06> CfgMgr: ';Washer.dlz'; module loaded.
01/01/1970 00:00:18> ATM Connected
01/01/1970 00:00:18> ATM layer is up, cell delineation achieved
01/01/1970 00:00:18> ADSL connected
01/01/1970 00:00:18> Modulation: G.dmt
01/01/1970 00:00:18> Annex Mode: ANNEX_A
01/01/1970 00:00:18> Max Tx Power: -38dBm/Hz
01/01/1970 00:00:18> CO Vendor: GLOBESPAN
01/01/1970 00:00:18> d/s SNR: 24.3dB, u/s SNR: 7.0dB
01/01/1970 00:00:18> d/s Attenuation: 14.4dB, u/s Attenuation: 2.0dB
01/01/1970 00:00:18> d/s Data Rate: 2048kbps, u/s Data Rate: 864kbps
01/01/1970 00:00:18> d/s Latency: FAST, u/s Latency: FAST
01/01/1970 00:00:18> d/s total bit capacity: 1954bits, used: 520bits
01/01/1970 00:00:18> u/s total bit capacity: 241bits, used: 241bits
01/01/1970 00:00:18> ATM Tx Error Count: 0, Rx Error Count: 0
01/01/1970 00:00:18> PPP1 PPPoE PADI Sent

点了多次  PPPOE 但总是拔不上号!!![color=#D2691E]文字

morfell

VPI弄对了没？？

xsx100

对的....................................

csdorroy

从日志上看你的modem已经与局端设备链路协商成功了的，可能是你的帐号问题，注意大小写，还有看看是不是被踢到黑名单了（因多次密码失败）

csdorroy

工作日志你拷贝完没有哦？好像刚开始进行PPPOE握手就没有下文了

gdfy

设置错误吧?