设为首页收藏本站
开启辅助访问

 找回密码
 注册

QQ登录

只需一步，快速开始

搜索
宽带技术网»首页 › :::::　资　源　共　享　区　::::: › 『 各类编程机备份文件下载区 』 › 【RTL8672】中兴ZTE H108L 电信原版编程机备份 ...
1 ...232425262728293031... 37下一页
返回列表 发新帖
楼主: YES东

[ADSL] 【RTL8672】中兴ZTE H108L 电信原版编程机备份

 火 [复制链接]
hbcysjp
发表于 2014-11-4 09:06:10 | 显示全部楼层
Booting...
Press '1' to enter BOOT console...
Press '2' to enter DEBUG mode......
Using Int. PHY
Hardware or Otherway Reset!

To read reset key,if on,to update
Found image at 0xbd4e0000
Found image at 0xbd630000
Flash owned validImgNum: 2
****Try the first image...
para->BootParaCksum=     9a4
ok!
Linux version 2.6.20.16zte (xia@njzd) (gcc version 3.4.6-1.3.6) #2 Mon Feb 21 11
:30:22 CST 2011
Check boot para cksum...
boot para cksum OK!
bootPara.runmode=3
SDRAM MTCR0: 0x544b0000
[prom_get_memsize (38)] rowcnt=2, colcnt=1, bankcnt=1, buswidth=1, memsize=32MB
CPU revision is: 0000ff00
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Built 1 zonelists.  Total pages: 8128
Kernel command line: console=ttyS0,115200 root=31:4
Primary instruction cache 16kB, linesize 16 bytes.
Primary data cache 8kB, linesize 16 bytes.
Synthesized TLB refill handler (17 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (25 instructions).
PID hash table entries: 128 (order: 7, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 23584k/32768k available (3856k kernel code, 9184k reserved, 860k data, 1
40k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  disabled.
pdt_cspkernel_init
NET: Registered protocol family 16
11930:22:53 [Klogctl][Info] [(1657)LogCtlInit] LogCtlInit begin
11930:22:53 [Klogctl][Info] [(1396)AddLogtab] AddLogtab: pLogTab=80498050,wLogTa
bNum=64,dwLogTabIDBase = 0X00000000
11930:22:53 [Klogctl][Info] [(1463)AddLogOutModule] AddLogOutModule:OutputMode=0
X00000200,ptLogProcSet=81055c38
11930:22:53 [Klogstdio][Info] [(1080)LogStdioProcInit] LogStdioProcInit

11930:22:53 [Klogctl][Info] [(1463)AddLogOutModule] AddLogOutModule:OutputMode=0
X00000100,ptLogProcSet=81055c38
11930:22:53 [Klogfile][Info] [(2924)LogFileProcInit] LogFileProcInit

11930:22:53 [Klogfile][Info] [(2936)LogFileProcInit] g_dwUptime is 946684800

11930:22:53 [Klogctl][Info] [(1396)AddLogtab] AddLogtab: pLogTab=80499770,wLogTa
bNum=2,dwLogTabIDBase = 0X00080000
11930:22:53 [Klogctl][Info] [(1512)SetLogOutputMode] SetLogOutputMode:bType=1,Ou
tputMode=0X00000700
11930:22:53 [Klogctl][Info] [(1590)SetLogConf] SetLogConf OutputMode=0X00000100,
pBuf=81055bb8,iLen=88
11930:22:53 [Klogfile][Info] [(2743)ProcLogConf] Set LOG_FILE_CONF_SET_PDTCONF

11930:22:53 [Klogfile][Info] [(2831)ProcLogConf] Set LogFileFormatTimestamp
11930:22:53 [Klogctl][Info] [(1723)LogCtlInit] LogCtlInit end
11930:22:53 [KLogCtl][Notice] [oss_logctl.c(321)ProcLog] System start!
11930:22:53 [Klogfile][Info] [(475)InitLogSaveBuff] InitLogSaveBuff
11930:22:53 [KMONITOR][Notice] [monitor.c(199)MonitorInit]  cspmonitor init... !

SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
11930:22:53 [MIRROR][Notice] [cspmirror.c(674)MirrorInit]  CspMirror start init
...
11930:22:53 [KQOS][Info] [qos.c(167)CSPKernel_QC_In] Qos module init
NET: Registered protocol family 8
NET: Registered protocol family 20
NET: Registered protocol family 2
ip_rt_init() start call CSP_alloc_large_system_hash
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
ip_rt_init() call CSP_alloc_large_system_hash end
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
It is 8672VE.
squashfs: version 3.2 (2007/01/02) Phillip Lougher
JFFS2 version 2.2. (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
netlog start
serial8250: ttyS0 at MMIO 0x0 (irq = 12) is a 16550A
RTL8192C/RTL8188C driver version 1.1 (2010-03-31/2010-06-09)
=====>>INSIDE rtl8192cd_init_one <<=====
Clock source is 35.328MHz
vendor_deivce_id=819110ec
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
flash device: 0x1000000 at 0xbd000000
SFCR:0xb8001200 SFCSR:0xb8001208 SFDR:0xb800120c
get SPI chip driver!
Physically mapped flash: Found an alies 0x1000000 for the chip at 0x0, spansion
16M device detect.
Creating 8 MTD partitions on "Physically mapped flash":
0x00000000-0x01000000 : "whole_flash"
0x00000000-0x00020000 : "bootloader"
0x00020000-0x00060000 : "userconfig"
0x004e0000-0x00630000 : "kernel"
0x00060000-0x004e0000 : "filesystem"
0x00630000-0x00780000 : "kernel2"
0x00780000-0x00c00000 : "filesystem2"
0x00c00000-0x01000000 : "ct-jffs2"
block2mtd: version $Revision: 1.30 $
Enable 8671G 1 function
Enable 8671 0 function
Enable 8672 function
ratm: Realtek SAR v1.02 (Feb 17, 2009)
u32 classifier
    OLD policer on
nf_conntrack version 0.5.0 (256 buckets, 2048 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
netfilter PSD loaded - (c) astaro AG
NET: Registered protocol family 1
NET: Registered protocol family 10
6WIND/LSIIT IPv6 multicast forwarding 0.1 plus PIM-SM/SSM with *BSD API
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
af_packet.c packet_init call register_netdevice_notifier
Bridge firewalling registered
br_init call register_netdevice_notifier
Ebtables v2.0 registered
NET: Registered protocol family 24
PPP Deflate Compression module registered
11930:22:55 [LEDKEYDRV][Info] [ledkey_mod.c(1638)LedkeymodInit] Ledkey_mod Drive
r Version 0.0.1.
11930:22:55 [LEDKEYDRV][Info] [ledkey_mod.c(1689)LedkeymodInit] watchdog enable!

watchdog started
11930:22:55 [TAGPARAM][Info] [tagparam_mod.c(1383)TagaramodInit] Tagaram module
Driver Version 0.0.1.
11930:22:55 [TAGPARAM][Info] [tagparam_mod.c(1423)TagaramodInit] parse tag param
success
11930:22:55 [km255][Info] [ver_info.c(349)ver_info_init] ver_info_init
________________CspGetVerInfo____________________
bootPara.bootWhichImg=1
bootPara.img_info_tbl[0].flashOffset=0x  4e0000
g_MaxNumOfFirmWare =2
sHardVersion=V1.0.01
11930:22:55 [km255][Info] [ver_info.c(138)ReadInfoFromVer] ver_info_init
11930:22:55 [km255][Info] [ver_info.c(145)ReadInfoFromVer] ver_info_init
11930:22:55 [km255][Info] [ver_info.c(161)ReadInfoFromVer] wFirmwareForm is:0x1

11930:22:55 [KSWETH][Notice] [csp_ifinfo.c(191)csp_ifinfo_init] Initializing CSP
IFinfo...
11930:22:55 [KSWETH][Warn] [csp_ifinfo.c(213)csp_ifinfo_init] No IFinfo in flash
!
11930:22:55 [KSWETH][Notice] [sweth_core.c(2667)sweth_init] SW&ETH HAL driver in
iting!
11930:22:55 [KSWETH][Notice] [sweth_core.c(129)CreateSwEthObjs] Create SW & ETH
objects
11930:22:55 [KSWETH][Info] [sweth_core.c(152)CreateSwEthObjs] nEmac = 1, nSw = 1
, nEth=4.
11930:22:55 [KSWETH][Info] [sweth_core.c(221)CreateSwEthObjs] SW obj0: TypeId =
1, CpuEmac = 0, PortToCpu=0
11930:22:55 [KSWETH][Info] [sweth_core.c(311)CreateSwEthObjs] ETH obj0: PhyType
= 4, Is_assoc_sw = 1, Emac = 0, Phy = 1
11930:22:55 [KSWETH][Info] [sweth_core.c(311)CreateSwEthObjs] ETH obj1: PhyType
= 4, Is_assoc_sw = 1, Emac = 0, Phy = 2
11930:22:55 [KSWETH][Info] [sweth_core.c(311)CreateSwEthObjs] ETH obj2: PhyType
= 4, Is_assoc_sw = 1, Emac = 0, Phy = 3
11930:22:55 [KSWETH][Info] [sweth_core.c(311)CreateSwEthObjs] ETH obj3: PhyType
= 4, Is_assoc_sw = 1, Emac = 0, Phy = 4
REALTEK NIC Ethernet driver v0.1 (Feb 13, 2009)
eth0,dev->ifindex = 8
eth0: RTL-8139C+ at 0xb8018000, c8:64:c7:80:c5:70, IRQ 0
eth1,dev->ifindex = 9
eth1: RTL-8139C+ at 0xb8018000, c8:64:c7:80:c5:70, IRQ 0
eth2,dev->ifindex = 10
eth2: RTL-8139C+ at 0xb8018000, c8:64:c7:80:c5:70, IRQ 0
eth3,dev->ifindex = 11
eth3: RTL-8139C+ at 0xb8018000, c8:64:c7:80:c5:70, IRQ 0
------------reset_switch-------------
eth phy patch done!
11930:22:56 [KSWETH][Notice] [reltk_mac_adapt(822)Register_reltk_] Register relt
k EMAC driver
11930:22:56 [KSWETH][Notice] [sweth_core.c(577)RegisterEmacDrv] Register EMAC dr
iver
11930:22:56 [KSWETH][Notice] [sweth_core.c(418)InitSwEthObjs] Initialise SW & ET
H objects
11930:22:56 [KSWETH][Notice] [sweth_core.c(461)InitSwEthObjs] SW obj connected w
ith ETH0 is not initialised yet!
11930:22:56 [KSWETH][Notice] [sweth_core.c(461)InitSwEthObjs] SW obj connected w
ith ETH1 is not initialised yet!
11930:22:56 [KSWETH][Notice] [sweth_core.c(461)InitSwEthObjs] SW obj connected w
ith ETH2 is not initialised yet!
11930:22:56 [KSWETH][Notice] [sweth_core.c(461)InitSwEthObjs] SW obj connected w
ith ETH3 is not initialised yet!
No filesystem could mount root, tried:  squashfs vfat
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,4)


Booting...
Press '1' to enter BOOT console...
Press '2' to enter DEBUG mode......
Using Int. PHY
Hardware or Otherway Reset!

To read reset key,if on,to update
(c)Copyright Realtek, Inc. 2009
Project RTL867X LOADER (LZMA)
Version V2.1.01 (Feb 21 2011 11:06:05)

<RTL867X>
<RTL867X>nvram erase
<RTL867X>reboot


Booting...
Press '1' to enter BOOT console...
Press '2' to enter DEBUG mode......
Using Int. PHY
Hardware or Otherway Reset!

To read reset key,if on,to update
Found image at 0xbd4e0000
Found image at 0xbd630000
Flash owned validImgNum: 2
****Try the first image...
para->BootParaCksum=     9a4
ok!
Linux version 2.6.20.16zte (xia@njzd) (gcc version 3.4.6-1.3.6) #2 Mon Feb 21 11
:30:22 CST 2011
Check boot para cksum...
boot para cksum OK!
bootPara.runmode=3
SDRAM MTCR0: 0x544b0000
[prom_get_memsize (38)] rowcnt=2, colcnt=1, bankcnt=1, buswidth=1, memsize=32MB
CPU revision is: 0000ff00
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Built 1 zonelists.  Total pages: 8128
Kernel command line: console=ttyS0,115200 root=31:4
Primary instruction cache 16kB, linesize 16 bytes.
Primary data cache 8kB, linesize 16 bytes.
Synthesized TLB refill handler (17 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (25 instructions).
PID hash table entries: 128 (order: 7, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 23584k/32768k available (3856k kernel code, 9184k reserved, 860k data, 1
40k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  disabled.
pdt_cspkernel_init
NET: Registered protocol family 16
11930:22:53 [Klogctl][Info] [(1657)LogCtlInit] LogCtlInit begin
11930:22:53 [Klogctl][Info] [(1396)AddLogtab] AddLogtab: pLogTab=80498050,wLogTa
bNum=64,dwLogTabIDBase = 0X00000000
11930:22:53 [Klogctl][Info] [(1463)AddLogOutModule] AddLogOutModule:OutputMode=0
X00000200,ptLogProcSet=81055c38
11930:22:53 [Klogstdio][Info] [(1080)LogStdioProcInit] LogStdioProcInit

11930:22:53 [Klogctl][Info] [(1463)AddLogOutModule] AddLogOutModule:OutputMode=0
X00000100,ptLogProcSet=81055c38
11930:22:53 [Klogfile][Info] [(2924)LogFileProcInit] LogFileProcInit

11930:22:53 [Klogfile][Info] [(2936)LogFileProcInit] g_dwUptime is 946684800

11930:22:53 [Klogctl][Info] [(1396)AddLogtab] AddLogtab: pLogTab=80499770,wLogTa
bNum=2,dwLogTabIDBase = 0X00080000
11930:22:53 [Klogctl][Info] [(1512)SetLogOutputMode] SetLogOutputMode:bType=1,Ou
tputMode=0X00000700
11930:22:53 [Klogctl][Info] [(1590)SetLogConf] SetLogConf OutputMode=0X00000100,
pBuf=81055bb8,iLen=88
11930:22:53 [Klogfile][Info] [(2743)ProcLogConf] Set LOG_FILE_CONF_SET_PDTCONF

11930:22:53 [Klogfile][Info] [(2831)ProcLogConf] Set LogFileFormatTimestamp
11930:22:53 [Klogctl][Info] [(1723)LogCtlInit] LogCtlInit end
11930:22:53 [KLogCtl][Notice] [oss_logctl.c(321)ProcLog] System start!
11930:22:53 [Klogfile][Info] [(475)InitLogSaveBuff] InitLogSaveBuff
11930:22:53 [KMONITOR][Notice] [monitor.c(199)MonitorInit]  cspmonitor init... !

SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
11930:22:53 [MIRROR][Notice] [cspmirror.c(674)MirrorInit]  CspMirror start init
...
11930:22:53 [KQOS][Info] [qos.c(167)CSPKernel_QC_In] Qos module init
NET: Registered protocol family 8
NET: Registered protocol family 20
NET: Registered protocol family 2
ip_rt_init() start call CSP_alloc_large_system_hash
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
ip_rt_init() call CSP_alloc_large_system_hash end
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
It is 8672VE.
squashfs: version 3.2 (2007/01/02) Phillip Lougher
JFFS2 version 2.2. (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
netlog start
serial8250: ttyS0 at MMIO 0x0 (irq = 12) is a 16550A
RTL8192C/RTL8188C driver version 1.1 (2010-03-31/2010-06-09)
=====>>INSIDE rtl8192cd_init_one <<=====
Clock source is 35.328MHz
vendor_deivce_id=819110ec
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
flash device: 0x1000000 at 0xbd000000
SFCR:0xb8001200 SFCSR:0xb8001208 SFDR:0xb800120c
get SPI chip driver!
Physically mapped flash: Found an alies 0x1000000 for the chip at 0x0, spansion
16M device detect.
Creating 8 MTD partitions on "Physically mapped flash":
0x00000000-0x01000000 : "whole_flash"
0x00000000-0x00020000 : "bootloader"
0x00020000-0x00060000 : "userconfig"
0x004e0000-0x00630000 : "kernel"
0x00060000-0x004e0000 : "filesystem"
0x00630000-0x00780000 : "kernel2"
0x00780000-0x00c00000 : "filesystem2"
0x00c00000-0x01000000 : "ct-jffs2"
block2mtd: version $Revision: 1.30 $
Enable 8671G 1 function
Enable 8671 0 function
Enable 8672 function
ratm: Realtek SAR v1.02 (Feb 17, 2009)
u32 classifier
    OLD policer on
nf_conntrack version 0.5.0 (256 buckets, 2048 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
netfilter PSD loaded - (c) astaro AG
NET: Registered protocol family 1
NET: Registered protocol family 10
6WIND/LSIIT IPv6 multicast forwarding 0.1 plus PIM-SM/SSM with *BSD API
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
af_packet.c packet_init call register_netdevice_notifier
Bridge firewalling registered
br_init call register_netdevice_notifier
Ebtables v2.0 registered
NET: Registered protocol family 24
PPP Deflate Compression module registered
11930:22:55 [LEDKEYDRV][Info] [ledkey_mod.c(1638)LedkeymodInit] Ledkey_mod Drive
r Version 0.0.1.
11930:22:55 [LEDKEYDRV][Info] [ledkey_mod.c(1689)LedkeymodInit] watchdog enable!

watchdog started
11930:22:55 [TAGPARAM][Info] [tagparam_mod.c(1383)TagaramodInit] Tagaram module
Driver Version 0.0.1.
11930:22:55 [TAGPARAM][Info] [tagparam_mod.c(1423)TagaramodInit] parse tag param
success
11930:22:55 [km255][Info] [ver_info.c(349)ver_info_init] ver_info_init
________________CspGetVerInfo____________________
bootPara.bootWhichImg=1
bootPara.img_info_tbl[0].flashOffset=0x  4e0000
g_MaxNumOfFirmWare =2
sHardVersion=V1.0.01
11930:22:55 [km255][Info] [ver_info.c(138)ReadInfoFromVer] ver_info_init
11930:22:55 [km255][Info] [ver_info.c(145)ReadInfoFromVer] ver_info_init
11930:22:55 [km255][Info] [ver_info.c(161)ReadInfoFromVer] wFirmwareForm is:0x1

11930:22:55 [KSWETH][Notice] [csp_ifinfo.c(191)csp_ifinfo_init] Initializing CSP
IFinfo...
11930:22:55 [KSWETH][Warn] [csp_ifinfo.c(213)csp_ifinfo_init] No IFinfo in flash
!
11930:22:55 [KSWETH][Notice] [sweth_core.c(2667)sweth_init] SW&ETH HAL driver in
iting!
11930:22:55 [KSWETH][Notice] [sweth_core.c(129)CreateSwEthObjs] Create SW & ETH
objects
11930:22:55 [KSWETH][Info] [sweth_core.c(152)CreateSwEthObjs] nEmac = 1, nSw = 1
, nEth=4.
11930:22:55 [KSWETH][Info] [sweth_core.c(221)CreateSwEthObjs] SW obj0: TypeId =
1, CpuEmac = 0, PortToCpu=0
11930:22:55 [KSWETH][Info] [sweth_core.c(311)CreateSwEthObjs] ETH obj0: PhyType
= 4, Is_assoc_sw = 1, Emac = 0, Phy = 1
11930:22:55 [KSWETH][Info] [sweth_core.c(311)CreateSwEthObjs] ETH obj1: PhyType
= 4, Is_assoc_sw = 1, Emac = 0, Phy = 2
11930:22:55 [KSWETH][Info] [sweth_core.c(311)CreateSwEthObjs] ETH obj2: PhyType
= 4, Is_assoc_sw = 1, Emac = 0, Phy = 3
11930:22:55 [KSWETH][Info] [sweth_core.c(311)CreateSwEthObjs] ETH obj3: PhyType
= 4, Is_assoc_sw = 1, Emac = 0, Phy = 4
REALTEK NIC Ethernet driver v0.1 (Feb 13, 2009)
eth0,dev->ifindex = 8
eth0: RTL-8139C+ at 0xb8018000, c8:64:c7:80:c5:70, IRQ 0
eth1,dev->ifindex = 9
eth1: RTL-8139C+ at 0xb8018000, c8:64:c7:80:c5:70, IRQ 0
eth2,dev->ifindex = 10
eth2: RTL-8139C+ at 0xb8018000, c8:64:c7:80:c5:70, IRQ 0
eth3,dev->ifindex = 11
eth3: RTL-8139C+ at 0xb8018000, c8:64:c7:80:c5:70, IRQ 0
------------reset_switch-------------
eth phy patch done!
11930:22:56 [KSWETH][Notice] [reltk_mac_adapt(822)Register_reltk_] Register relt
k EMAC driver
11930:22:56 [KSWETH][Notice] [sweth_core.c(577)RegisterEmacDrv] Register EMAC dr
iver
11930:22:56 [KSWETH][Notice] [sweth_core.c(418)InitSwEthObjs] Initialise SW & ET
H objects
11930:22:56 [KSWETH][Notice] [sweth_core.c(461)InitSwEthObjs] SW obj connected w
ith ETH0 is not initialised yet!
11930:22:56 [KSWETH][Notice] [sweth_core.c(461)InitSwEthObjs] SW obj connected w
ith ETH1 is not initialised yet!
11930:22:56 [KSWETH][Notice] [sweth_core.c(461)InitSwEthObjs] SW obj connected w
ith ETH2 is not initialised yet!
11930:22:56 [KSWETH][Notice] [sweth_core.c(461)InitSwEthObjs] SW obj connected w
ith ETH3 is not initialised yet!
No filesystem could mount root, tried:  squashfs vfat
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,4)
回复 顶 踩

举报

hbcysjp
发表于 2014-11-4 09:07:02 | 显示全部楼层
已经刷城砖了，砖头一块
回复 顶 踩

举报

longcui5 该用户已被删除
发表于 2014-11-14 09:19:05 | 显示全部楼层
提示: 作者被禁止或删除 内容自动屏蔽
回复 顶 踩

举报

YZCYJ
发表于 2014-12-21 19:39:13 | 显示全部楼层
感谢楼主分享
回复 顶 踩

举报

Yuanstone 该用户已被删除
发表于 2015-1-7 21:59:25 | 显示全部楼层
提示: 作者被禁止或删除 内容自动屏蔽
回复 顶 踩

举报

samyueco 该用户已被删除
发表于 2015-1-14 23:05:16 | 显示全部楼层
提示: 作者被禁止或删除 内容自动屏蔽
回复 顶 踩

举报

baobao20201314 该用户已被删除
发表于 2015-2-18 13:04:04 | 显示全部楼层
提示: 作者被禁止或删除 内容自动屏蔽
回复 顶 踩

举报

lihaitaojc
发表于 2015-2-19 02:20:03 | 显示全部楼层
1111111111111111111111111111
回复 顶 踩

举报

lihaitaojc
发表于 2015-2-19 02:20:28 | 显示全部楼层
zhiqiankandaodongxi,xiwangchongxinlianxi
回复 顶 踩

举报

下一页 »
1 ...232425262728293031... 37下一页
返回列表 发新帖
*滑块验证:
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|Archiver|小黑屋|宽带技术网 |网站地图

粤公网安备 44152102000001号

GMT+8, 2024-5-11 04:11 , Processed in 0.025644 second(s), 5 queries , Redis On.

Powered by Discuz! X3.5 Licensed

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表