|
|
大家帮我看看是什么原因，之前用东哥的配置文件用U盘还原过。
这是启动信息：
v0.06 PLL w ln p08 zi
Solos 461x PP boot v1.5
SDRAM size = 0x1000000
Processor clock speed 264.0MHz
@@@@@@@@@@@@@Disable watchdog.
cd
Solos 461x Network boot v1.19 (00000000) (FLASH)
MAC 00:22:33:44:55:66
SDRAM 0x01000000 bytes
Phy reset line on GPIO 4
192.168.1.1
Phy reset line on GPIO 4
(Hold '*' during reset for prompt)
Check multicast upgrade packets
Boot from Ethernet Port
v0.06 PLL w ln p08 zipacket, boot normally!
Solos 461x PP boot v1.5
SDRAM size = 0x1000000
Processor clock speed 264.0MHz
--- Check Tag CRC success,System Type: DUAL.
Start up info: .
ulFsOffset: e0000ulFsLen: 3301376 ulFsOffset: 917504
Finding flashfs partition...done.
PPB: image.a_magic = 0xea000006
PPB: image.a_text = 0x000012a0
PPB: image.a_data = 0x000b6820
PPB: image.a_bss = 0x0016e81c
PPB: image.a_syms = 0x00000000
PPB: image.a_entry = 0x00030020
PPB: image.a_trsize = 0x00000000
PPB: image.a_drsize = 0x00000000
Image 'image' is a Linux kernel
Trying to load initrd...none found
Calling Configure_NVS_FromFile.
Flash size is 0x01000000. sdram size = 0x01000000.
LZMA 4.05
init started: BusyBox v1.00 (2008.12.02-06:54+0000) multi-call binary
RCS DONE
Loading Conexant BSP...
BASE MAC ADDRESS 00:22:33:44:55:66
Starting Conexant drivers
. msc16 loaded
.starting task turbo_WhipTask
DSL MSC16 imem 4096, dmem 2048
DSL MSC16 version 1.3
.msc16_load_file returned 0
sram_buffer : 0xffa01d60 addr : 0x70001d60
Passing command buffer 70001d60 to MSC16
.
Conexant drivers started
Loading Wireless ...
Reading True PDA ...
Creating Delt char device
Loading drivers and kernel modules...
125
Waiting for cli start!/ enter the msg
\===enter the log
-
/*********分割线*******/
就卡在enter the log进入日志这里，就下不去了。 |
|
粤公网安备44152102000001号 
发表于 2012-4-10 14:05:55