怎样用超级终端备份华为hg520s固件？

wap774411

Factory reseting...(console is locked)
housekeeping: save config ok!
Shutdown PPP Process
Shutdown UPnP Process.

System Restarting...
NBcf1edfs1Z
PP Boot 9.0.8.9 (25th June 2005)
Copyright (c) 2004 Conexant Systems Ltd.
SDRAM size = 0x1000000
PLL indicates clock speed set to maximum value of 96MHz
Finding flashfs partition...done.
NPnLZMA 4.05

Quantum v1.01
Allocatable memory starts @ 0x553900, end @ 0x1000000

Skip the pool Javalin!!!!No, or invalid, configuration information in EEPROM - t
rying FLASH
Valid configuration (size 256)
HG-520 version V100R001B010  (Sep 14 2006)
BSP: Argon 4x2 Eval BSP v1.0
CSP: Argon 4x1 CSP v1.0 (ISOS 9.0)
Copyright (c) 2005

NP software version is 0x00000900 (reply took 6us)
SNMP Research EMANATE/Lite Agent Version 16.1.0.25

Waitting IM & bun configuration is ready
Copyright 1989-2004 SNMP Research, Inc.
ip101_DeviceAutoStart
atm_port_num =1 ip101_PortEnable:  PHY id1. Wanted 0243 got 1023 phyAddress is 5

ip101_PortEnable:  PHY id2. Wanted 0c54 got 0007 phyAddress is 5
adm6996m system control register default = [0x8001]
adm6996m system control register set = [0xa001]
hardware igmp snoopig default = [0x0]
hardware igmp snoopig set = [0x2]

bun_TimerEnable
Crossbow find PCI device !!!
name /pool/Javalin
default size=3456/prefix=352/count=200/extramsg=100/task/webserver: create varPo
ol 9d7730 300000
/task/webserver: create fixedPool a20b30 64000
im:Invalid argument:Failed to set layer2Session to (null)
im:Invalid argument:failed to set the SNTP host to
Invalid argument: DnsServerAddress INVALID
Invalid argument: DnsServerAddress INVALID
Invalid argument: DnsServerAddress INVALID
Invalid argument: DnsServerAddress INVALID

Wireless Setting entry
...No im.upload,do nothing...

USE JAVELIN_WIRELESS_IF
wireless:Invalid argument:Failed to set MaxFrameBurst to 1500

Login:
Javelin Sync Im Config !!!

You must supply a username

Login: admin
Password: *****

Login successful
-->


下一步怎么操作，怎样备份，和刷新啊。

wap774411

敲入一个?号后又显示下面的一些字。
802.1x           802.1x port based authentication
WLAN             Configure Wireless Module
agent            Get a file from a remote host
ald              Configuration commands for ald
atmloopback      commands to configure remote ATM loopback
autoprov
bridge           Configure layer 2 bridge
classifier       Packet classifier configuration commands
console          Console access
dhcpclient       DHCP client configuration commands
dhcpserver       DHCP server configuration commands
diagnosticTest
dnsclient        DNS client configuration commands
dnsrelay         DNS relay configuration
dyndns           Dynamic DNS Updater commands
ethernet         Commands to configure ethernet transports
firewall         Firewall configuration commands
help             Top level CLI help
igmp
imdebug          Directly access the information model
ip               Configure IP router
logger           Log to a remote host using syslog
meter            Packet metering configuration command
nat              NAT configuration commands
port             Physical port configuration commands
pppoa            PPP over ATM configuration
pppoe
radclient        RADIUS Client Configuration commands
rfc1483          Commands to configure RFC1483 transports
scheduler        Configuration commands for scheduler
security         Security configuration commands not specific to NAT or firewall

snmp
sntpclient
source           Read a file of commands
system           System administration commands
tftpc            TFTP client commands
tp               Test Portal commands
transports       Transport configuration commands
upnp             UPnP configuration commands
user             User commands
webserver        Webserver configuration commands
wpa              Configure WPA (Wireless Protected Access)
zipb             Configure Dynamic ZIPB mode
-->