[求助]求DSL U2760 v1.04的固件!

desom

我的大亚DB120-WN还是电信的固件,想刷U2760,但是官网上只能下到1.07的固件了,听说这个固件没有CFE要先刷1.04版本再升级1.07才正常,我现在直街刷了1.07的固件,直接不能用了
TTL信息如下

1. CFE version 1.0.37-102.6 for BCM96358 (32bit,SP,BE)
   
2. Build Date: Wed Mar 31 16:51:00 CST 2010 (richard@SWD100)
   
3. Copyright (C) 2000-2008 Broadcom Corporation.
   
4. 
   
5. Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
   
6. CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
   
7. CPU running TP0
   
8. Total memory: 33554432 bytes (32MB)
   
9. Boot Address 0xbe000000
   
10. 
    
11. 
    
12. Board IP address                  : 192.168.1.1:ffffff00  
    
13. Host IP address                   : 192.168.1.100  
    
14. Gateway IP address                :   
    
15. Run from flash/host (f/h)         : f  
    
16. Default host run file name        : vmlinux  
    
17. Default host flash file name      : bcm963xx_fs_kernel  
    
18. Boot delay (0-9 seconds)          : 1  
    
19. Boot image (0=latest, 1=previous) : 0  
    
20. Check Reset Default Hold [0|1]    :   
    
21. Board Id (0-12)                   : 96358VW2_N60  
    
22. Number of MAC Addresses (1-32)    : 11  
    
23. Base MAC Address                  : 00:25:5e:d0:17:5f  
    
24. PSI Size (1-64) KBytes            : 24  
    
25. Main Thread Number [0|1]          : 0  
    
26. User Password                     : "v99su"  
    
27. WLAN SSID Paramters               : "ChinaNet-W2Qu,zhzqfm4u"  
    
28. Device Serial Number              : "4420000255ED0175F"  
    
29. 
    
30. *** Press any key to stop auto run (1 seconds) ***
    
31. Auto run second count down: 111
    
32. CFE>
    
33. web info: Waiting for connection on socket 0.
    
34. 
    
35. CFE>  
    
36. web info: Waiting for connection on socket 1.
    
37. 
    
38. CFE>  
    
39. web info: Waiting for connection on socket 0.
    
40. 
    
41. CFE>  
    
42. web info: Upload 2752516 bytes, Broadcom image format.
    
43. 
    
44. CFE>  Write flash at blk_start[47] start_addr[0xbe5e0000]
    
45. 
    
46. Flashing root file system and kernel at 0xbe5e0000: ......................
    
47. 
    
48. .
    
49. *** Image flash done *** !
    
50. 
    
51. Resetting board...
    
52. 
    
53. CFE version 1.0.37-102.6 for BCM96358 (32bit,SP,BE)
    
54. Build Date: Wed Mar 31 16:51:00 CST 2010 (richard@SWD100)
    
55. Copyright (C) 2000-2008 Broadcom Corporation.
    
56. 
    
57. Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
    
58. CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
    
59. CPU running TP0
    
60. Total memory: 33554432 bytes (32MB)
    
61. Boot Address 0xbe000000
    
62. 
    
63. 
    
64. Board IP address                  : 192.168.1.1:ffffff00  
    
65. Host IP address                   : 192.168.1.100  
    
66. Gateway IP address                :   
    
67. Run from flash/host (f/h)         : f  
    
68. Default host run file name        : vmlinux  
    
69. Default host flash file name      : bcm963xx_fs_kernel  
    
70. Boot delay (0-9 seconds)          : 1  
    
71. Boot image (0=latest, 1=previous) : 0  
    
72. Check Reset Default Hold [0|1]    :   
    
73. Board Id (0-12)                   : 96358VW2_N60  
    
74. Number of MAC Addresses (1-32)    : 11  
    
75. Base MAC Address                  : 00:25:5e:d0:17:5f  
    
76. PSI Size (1-64) KBytes            : 24  
    
77. Main Thread Number [0|1]          : 0  
    
78. User Password                     : "v99su"  
    
79. WLAN SSID Paramters               : "ChinaNet-W2Qu,zhzqfm4u"  
    
80. Device Serial Number              : "4420000255ED0175F"  
    
81. 
    
82. *** Press any key to stop auto run (1 seconds) ***
    
83. Auto run second count down: 110
    
84. Booting from latest image (0xbe5e0000) ...
    
85. Read flash at blk[47]
    
86. Code Address: 0x80010000, Entry Address: 0x80010000
    
87. LZMA: Prossible old LZMA format, trying to decompress..
    
88. Decompression OK!
    
89. Entry at 0x80010000
    
90. Closing network.
    
91. Closing DMA Channels.
    
92. Starting program at 0x80010000
    
93. Linux version 2.6.32.10 (openwrt@wrt1.marcant.net) (gcc version 4.3.3 (GCC) ) #20 Tue Apr 6 16:01:03 CEST 2010
    
94. Detected Broadcom 0x6358 CPU revision a1
    
95. CPU frequency is 300 MHz
    
96. 32MB of RAM installed
    
97. registering 40 GPIOs
    
98. board_bcm963xx: CFE version: 1.0.37-102.6
    
99. board_bcm963xx: unknown bcm963xx board: 96358VW2_N60
    
100. bootconsole [early0] enabled
     
101. CPU revision is: 0002a010 (Broadcom BCM6358)
     
102. Kernel panic - not syncing: unable to detect bcm963xx board
     

复制代码

tiannianfang

这是1.04原版固件的

desom

谢谢tiannianfang,我刷了这个cfe后
CFE version 1.0.37-102.9 for BCM96358 (32bit,SP,BE)
Build Date: Thu Jan 15 20:34:16 PST 2009 (root@pclinux-lkaplan)
Copyright (C) 2000-2008 Broadcom Corporation.

Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
Auto-negotiation timed-out
10 MB Half-Duplex (assumed)
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Boot Address 0xbe000000


Board IP address                  : 192.168.1.1:ffffff00  
Host IP address                   : 192.168.1.100  
Gateway IP address                :   
Run from flash/host (f/h)         : f  
Default host run file name        : vmlinux  
Default host flash file name      : bcm963xx_fs_kernel  
Boot delay (0-9 seconds)          : 1  
Boot image (0=latest, 1=previous) : 0  
Board Id (0-5)                    : 96358VW2  
Number of MAC Addresses (1-32)    : 11  
Base MAC Address                  : 00:25:5e:d0:17:5f  
PSI Size (1-64) KBytes            : 24  
Main Thread Number [0|1]          : 0  

*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 111
CFE>

在CFE状态无法ping通192.168.1.1了,试过重设Board Id为 1,2,3,4,5都试了,还是不行

是不是只有编程器换CFE了??还有没有别的办法??
我没有编程器啊!!!!!
HELP!!!

desom

原来Board Id没有设置成功
e n命令不知怎么用,这样输入好像无效,看下面
CFE> e n
Erase nvram? (y/n):
*** command status = 0
CFE>

是什么意思啊?好像没有按y,我试过按y了也不行啊!!!

CFE> e n
Erase nvram? (y/n):
*** command status = 0
CFE> y
Invalid command: "y"
Available commands: sm, dm, w, e, r, p, c, f, i, b, reset, flashimage, help

*** command status = -1
CFE>

tiannianfang

教程说这样可以启动固件了吧

desom

固件是启动 了,但是以后不能刷别的固件了,CFE不能登录万一有问题还不是要等死?

tiannianfang

可以在固件的升级界面里刷的啊

desom

比如我想刷openwrt，刷完启动不了
cfe也不能刷了，还不是相当于砖了？？？又没编程器

bsctv1

偶是先刷博通带cfe版，再刷2760 1.07，全是web升级的

keenman

楼上的可行吗？博通的固件能否给个地址？