DB120刷了博达3G固件后,刚刚用TTL线在CFE下输入e a命令后,出现“Flash image not found”,是否已经砖了?还是可以通过TTL修复?
完整启动信息如下:
没有用TTL线使用e a命令前:
BCM63xx_ENET: 10 MB Half-Duplex (assumed)
eth0: MAC Address: 00:E0:FC:00:E0:FC
Broadcom BCM6358A1 Ethernet Network Device v0.3 Aug 9 2010 10:49:53
KLOB extended to 2 pools
CFE version 1.0.37-102.9 for BCM96358 (32bit,SP,BE)
Build Date: Wed Jul 29 20:25:16 CST 2009 (kevin@BS5)
Copyright (C) 2000-2009 Broadcom Corporation.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Boot Address 0xbe000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : 96358VW2
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:e0:fc:00:e0:fc
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 1
web info: Waiting for connection on socket 0.
CFE>
===========TTL线,用了e a命令后==========================
CFE version 1.0.37-102.9 for BCM96358 (32bit,SP,BE)
Build Date: Wed Jul 29 20:25:16 CST 2009 (kevin@BS5)
Copyright (C) 2000-2009 Broadcom Corporation.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Boot Address 0xbe000000
** Flash image not found. **
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : 96358VW2
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:e0:fc:00:e0:fc
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
web info: Waiting for connection on socket 0.
CFE>
|