|
|
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x80528200 (1208832)
Initialized Data: 0x8041DB70 - 0x8041F900 (7568)
BSS Area: 0x8041F900 - 0x80426200 (26880)
Local Heap: 0x80426200 - 0x80526200 (1048576)
Stack Area: 0x80526200 - 0x80528200 (8192)
Text (code) segment: 0x80401000 - 0x8041DB64 (117604)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id Name : 96358SV
Psi size in KB : 24
Number of MAC Addresses (1-32) : 8
Base MAC Address :
Ethernet PHY Type : External Switch Using Reverse MII
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Code Address: 0x80010000, Entry Address: 0x80238018
Decompression OK!
Entry at 0x80238018
Closing network.
Starting program at 0x80238018
Linux version 2.6.8.1 (root@MOD6538) (gcc version 3.4.2) #1 Thu Jan 8 01:17:55 C
ST 2009
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
*** Board is not initialized properly ***
96358SV prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 01fa0000 @ 00000000 (usable)
On node 0 totalpages: 8096
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 4000 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 128 (order 7: 1024 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29552k/32384k available (1809k kernel code, 2788k reserved, 394k data, 7
6k init, 0k highmem)
KLOB Pool 1 Initialized: 1048576 bytes <0x80e00000 ... 0x80f00000>
Calibrating delay loop... 299.00 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Total Flash size: 16384K with 128 sectors
File system address: 0xbe020100
Can't analyze prologue code at 801d2e84
SCSI subsystem initialized
usbcore: registered new driver hub
Skipping PCI bus scan due to resource conflict
Initializing Cryptographic API
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
brcmboard: brcm_board_init entry
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xfffe0100 (irq = 10) is a BCM63XX
ttyS1 at MMIO 0xfffe0120 (irq = 11) is a BCM63XX
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 76k freed
init started: BusyBox v1.00 (2009.01.07-17:21+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
I am in rcS now
BusyBox v1.00 (2009.01.07-17:21+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
atmapi: module license 'Proprietary' taints kernel.
adsl: adsl_init entry
blaadd: blaa_detect entry
Broadcom BCMPROCFS v1.0 initialized
BCM63xx_ENET board id not set
insmod: cannot insert `/lib/modules/2.6.8.1/extra/bcm_enet.ko': Success (19): Su
ccess
I am in profile now...
mount: Mounting /dev/sda1 on /opt failed: No such device or address
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
Error parsing XML configuration: error fatal_err.
BcmAdsl_Initialize=0xC005E3C8, g_pFnNotifyCallback=0xC0077314
AnnexCParam=0x7FFF7E98 AnnexAParam=0x00000980 adsl2=0x00000000
pSdramPHY=0xA1FFFFF8, 0x1B7B28 0xDEADBEEF
AdslCoreHwReset: AdslOemDataAddr = 0xA1FFBB64
AnnexCParam=0x7FFF7E98 AnnexAParam=0x00000980 adsl2=0x00000000
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
ATM proc init !!!
==> Bcm963xx Software Version: 1135_021408-3.10L.02.A2pB023k.d20h <==
invalid interface name eth0
power <down|up> epower down/up for Switch
RSA public decrypt : error:0407006A:lib(4):func(112):reason(106)
CGI: License key is invalid
sntp: host not found
RSA public decrypt : error:0407006A:lib(4):func(112):reason(106)
CGI: License key is invalid
sntp: host not found
telnetd: starting
port: 20023; interface: any; login program: /bin/login
Bind failed: Cannot assign requested address
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: try to capture br0 IP
telnetd: time out waiting br0 up
ioctl SIOCGFADDR: Cannot assign requested address
现在是必须要输入用户名 密码 但是用telecomadmin
nE7jA%5m
或者telecomadmin
telecomadmin
都不能进入
能用admin admin 进入 但是
Login: admin
Password:
>
进入了就这样 不能输入任何命令
> en
en: not found
> i
i: not found
> f
f: not found
>
求解答~~
|
|
粤公网安备44152102000001号 
发表于 2011-2-14 15:21:38
