为何启动不了？

zzq0106

一篇介绍64k和128k固件的原文如下：
16M的Flash如果目前是非ISP原版CFE的话，在CFE下使用“e a”命令清空Flash后，刷了128K的固件，那么一般应该正常成功启动image。启动地址为0xbe20000。

我目前的固件启动地址是0xbe80000，用e a命令之后，刷128k带cfe的原版固件是在地址0xbe20000处刷的，可是完成后无法启动，输出信息如下：
CFE> e a
Erase all flash (except bootrom)? (y/n):y
No image tag found.  Erase the blocks start at [1]...............................................................................................................................
Resetting board... version 1.0.37-10.1 for
BCM96358 (32bit,SP,BE)
Build Date: Tue Apr 24 15:57:24 CST 2007 (gavin@FD5)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE:  0x80401000 - 0x80527C50 (1207376)
Initialized Data:          0x8041D580 - 0x8041F480 (7936)
BSS Area:                  0x8041F480 - 0x80425C50 (26576)
Local Heap:                0x80425C50 - 0x80525C50 (1048576)
Stack Area:                0x80525C50 - 0x80527C50 (8192)
Text (code) segment:       0x80401000 - 0x8041D57C (116092)
Boot area (physical):      0x00528000 - 0x00568000
Relocation Factor:         I:00000000 - D:00000000

** Flash image not found. **
Board IP address                  : 192.168.1.1:ffffff00
Host IP address                   : 192.168.1.100
Gateway IP address                :
Run from flash/host (f/h)         : f
Default host run file name        : vmlinux
Default host flash file name      : bcm963xx_fs_kernel
Boot delay (0-9 seconds)          : 1
Board Id (0-8)                    : 96358VW2
Number of MAC Addresses (1-32)    : 12
Base MAC Address                  :
PSI Size (1-64) KBytes            : 24
Main Thread Number [0|1]          : 0

这时候刷入原版带cfe的128k固件

web info: Waiting for connection on socket 0.
web info: Waiting for connection on socket 1.
web info: Waiting for connection on socket 0.
web info: Waiting for connection on socket 1.
web info: Upload 4383172 bytes, Broadcom image format.
web info: Waiting for connection on socket 0.
Flashing CFE: .
Flashing root file system and kernel at 0xbe020000: ..................................
*** Image flash done *** !
Resetting board...
CFE version 1.0.37-10.1 for BCM96358 (32bit,SP,BE)
Build Date: Tue Apr 24 15:57:24 CST 2007 (gavin@FD5)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE:  0x80401000 - 0x80527C50 (1207376)
Initialized Data:          0x8041D580 - 0x8041F480 (7936)
BSS Area:                  0x8041F480 - 0x80425C50 (26576)
Local Heap:                0x80425C50 - 0x80525C50 (1048576)
Stack Area:                0x80525C50 - 0x80527C50 (8192)
Text (code) segment:       0x80401000 - 0x8041D57C (116092)
Boot area (physical):      0x00528000 - 0x00568000
Relocation Factor:         I:00000000 - D:00000000
** Flash image not found. **

请问这是为什么？

zzq0106

顶一下，有人知道吗