|
|
连接TTL线，进入CFE，浏览器连接192.168.1.1，刷了固件后，MODEM重启，在CFE里面提示设置参数，设置信息如下：
Board Id Name (0-8)
96358M ------- 0
96358SV ------- 1
96358VW ------- 2
96358VW-16 ------- 3
96358GW-16 ------- 4
96358GW ------- 5
96358GW-A ------- 6
96358VW2 ------- 7
96358VW-A ------- 8 : 0 5
Number of MAC Addresses (1-32) : 24
Base MAC Address : 00:1e:40:7a:cb:3f
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
Base Ethernet PHY Number [0|1] : 1
Press any key to reset the board:
重启，不断出现以下信息:
CFE version 1.0.37-6.5 for BCM96358 (32bit,SP,BE)
Build Date: Tue Jan 27 11:04:51 CST 2009 (root@MOD6538)
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
Unknown PHY type
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x80528320 (1209120)
Initialized Data: 0x8041DB70 - 0x8041FA20 (7856)
BSS Area: 0x8041FA20 - 0x80426320 (26880)
Local Heap: 0x80426320 - 0x80526320 (q048576)
觮ack Area: 0x80526320 - 0x80528320 (8192)
Text (code) segment: 0x80401000 m 0x8041DB64 (117604)
Boot area (physical): 0x00529p00 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id Name : 96358GW
Psi size in KB ` : 24
Number of MAC Addresses (1-32) : r4
Base MAC Address : 00:1e:40:7a:cb:3f
Ethernet PHY Type : Internal
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Code Address: 0x80010000, Entry Address: 0x801ac018
Decompression OK!
Entry at 0x801ac018
Closing network.
Starting program at 0x801ac018
Linux version 2.6.8.1 (root@DU) (gcc version 3.4.2) #1 Wed Apr 29 08:25:50 CST 2
009
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
96358GW prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 01fa0000 @ 00000000 (usable)
On node 0 totalpages: 8096
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 4000 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO b醫ch:1
Bui靦 1 zonelists
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 128 (order 7: 1024 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30160k/32384k available (1429k kernel code, 2180k reserved, 215k data, 7
2k init, 0k highmem)
KLOB Pool 1 Initialized: 1048576 bytes <0x80e00000 ... 0x80f00000>
Calibrating delay loop... 299.00 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Total Flash size: 16384K with 128 sectors
Failed to read image tag from flash
Can't analyze prologue code at 80173cc4
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
Failed to read image tag from flash
brcmboard: brcm_board_init entry
SES: Button Interrupt 0x8025 is enabled
Invalid External Interrupt definition
SES: LED GPIO 0x801a is enabled
Invalid External Interrupt definition
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xfffe0100 (irq = 10) is a BCM63XX
ttyS1 at MMIO 0xfffe0120 (irq = 11) is a BCM63XX
u32 classifier
OLD policer on
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Cannot open root device "31:0" or unknown-block(31,0)
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on unknown-block(31,0)
<0>Rebooting in 1 seconds..
期间可以按任意键停止启动，出现CFE>提示符，但从浏览器不能连接到192.168.1.1
PS:上面的输出信息中，有一些乱码是怎么回事
在线等。。。
|
|
粤公网安备44152102000001号 
发表于 2010-12-10 10:50:45