CFE version 1.0.37-10.2 for BCM96358 (32bit,SP,BE)
Build Date: Tue Oct 23 15:23:12 CDT 2007 (root@mns.linux.usr)
Copyright (C) 2000-2007 U.S. Robotics Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
Unknown PHY type
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 67108864 bytes (64MB)
Total memory used by CFE: 0x80401000 - 0x80528410 (1209360)
Initialized Data: 0x8041D790 - 0x8041FC40 (9392)
BSS Area: 0x8041FC40 - 0x80426410 (26576)
Local Heap: 0x80426410 - 0x80526410 (1048576)
Stack Area: 0x80526410 - 0x80528410 (8192)
Text (code) segment: 0x80401000 - 0x8041D784 (116612)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1
Host IP address : 192.168.1.40
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcmDSL-2760U_cfe_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : 96358GW-A
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:03:0f:0f:7f:23
Country code : all
PSI Size (1-64) KBytes : 64
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from only image (0xbe800000) ...
Code Address: 0x80010000, Entry Address: 0x801ca018
Decompression OK!
Entry at 0x801ca018
Closing network.
Starting program at 0x801ca018
Linux version 2.6.8.1 (root@mns.linux.usr) (gcc version 3.4.2) #1 Wed Jan 9 16:1
0:17 CST 2008
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
96358GW-A prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 03fa0000 @ 00000000 (usable)
On node 0 totalpages: 16288
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 12192 pages, LIFO batch:2
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 256 (order 8: 2048 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 62444k/65152k available (1539k kernel code, 2640k reserved, 225k data, 7
2k init, 0k highmem)
KLOB Pool 1 Initialized: 1048576 bytes <0x80e00000 ... 0x80f00000>
Calibrating delay loop... 299.00 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Total Flash size: 16384K with 128 sectors
File system address: 0xbe800100
Can't analyze prologue code at 8018f484
usbcore: registered new driver hub
Initializing Cryptographic API
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
ehci_hcd 0000:00:0a.0: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ehci_hcd 0000:00:0a.0: irq 18, pci mem c0000300
ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:0a.0
ehci_hcd 0000:00:0a.0: USB f.f enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
ohci_hcd 0000:00:09.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:09.0 to 64
ohci_hcd 0000:00:09.0: irq 13, pci mem c0001400
ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
brcmboard: brcm_board_init entry
CFE version 1.0.37-10.2 for BCM96358 (32bit,SP,BE)
Build Date: Tue Oct 23 15:23:12 CDT 2007 (root@mns.linux.usr)
Copyright (C) 2000-2007 U.S. Robotics Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
Unknown PHY type
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 67108864 bytes (64MB)
Total memory used by CFE: 0x80401000 - 0x80528410 (1209360)
Initialized Data: 0x8041D790 - 0x8041FC40 (9392)
BSS Area: 0x8041FC40 - 0x80426410 (26576)
Local Heap: 0x80426410 - 0x80526410 (1048576)
Stack Area: 0x80526410 - 0x80528410 (8192)
Text (code) segment: 0x80401000 - 0x8041D784 (116612)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1
Host IP address : 192.168.1.40
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcmDSL-2760U_cfe_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : 96358GW-A
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:03:0f:0f:7f:23
Country code : all
PSI Size (1-64) KBytes : 64
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 1
web info: Waiting for connection on socket 0.
CFE> w 192.168.1.55:bcmDSL-2760U_cfe_fs_kernel
Loading 192.168.1.55:bcmDSL-2760U_cfe_fs_kernel ...
Loading failed.: CFE error -21
*** command status = -21
CFE> |
粤公网安备44152102000001号 
发表于 2010-9-16 17:53:58
发表于 2010-9-22 12:34:02