|
|
solosW-ehci usb00: Solos USB 2.0
solosW-ehci usb00: irq 9, pci mem ff800100
solosW-ehci usb00: new USB bus registered, assigned bus number 1
solosW-ehci usb00: park 0
solosW-ehci usb00: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
usb usb1: Product: Solos USB 2.0
usb usb1: Manufacturer: Linux 2.6.11.12 ehci_hcd
usb usb1: SerialNumber: Solos EHCI
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
INTR_MASK 37, 37
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
u32 classifier
OLD policer on
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
IPv4 over IPv4 tunneling driver
ip_conntrack version 2.1 (248 buckets, 1984 max) - 320 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
netfilter PSD loaded - (c) astaro AG
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Please set the MAC Address for the WAN Bridge.
Set the Environment variable 'wan_br_mac'.
MAC Address should be in the following format: xx.xx.xx.xx.xx.xx
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 76K
init started: BusyBox v1.01 (2008.07.08-07:58+0000) multi-call binary
Starting pid 133, console /dev/ttyS0: '/etc/rc'
Alarm clock
Loading Conexant BSP...
Using /lib/modules/2.6.11.12/kernel/drivers/net/arm/solos_ethernet.ko
solos_ethernet: module license 'unspecified' taints kernel.
rtl8306sd_hw_init
rtl8306_switch_init
rtl8306_init sucess!
rtl8306_initQos sucess!
rtl8306_setCPUPort sucess!
rtl8306_initVlan sucess!
rtl8306 IGMP snooping enabled!
rtl8306sd_hw_init
rtl8306sd_hw_init
rtl8306sd_hw_init
rtl8306sd_hw_init
rtl8306sd_hw_init
rtl8306sd_hw_init
solos_eth_mii: probed
Using /lib/hsl_mod_gpl.o
Using /lib/cnxt_fiq.o
Using /lib/cnxt_drv.o
BASE MAC ADDRESS 00:11:22:33:44:55
Starting Conexant drivers
.
Quantum v1.01
msc16 loaded
'create dev file with mknod /dev/adet_char c 244 0'.
starting task turbo_WhipTask
DSL MSC16 imem 4096, dmem 2048
DSL MSC16 version 1.3
msc16_load_file returned 0
sram_buffer : 0xffa01360 addr : 0x70001360
Passing command buffer 70001360 to MSC16
Conexant drivers started
Using /lib/wlan_wsc.ko
MY INIT Called
Using /lib/modules/2.6.11.12/kerRUNNING Timer started
nel/arch/arm/mach-solos/solosw_defaultrestore.ko
enable virtual port
value is 20001
value is 30002
value is 40004
value is 50008
Loading Wireless ...
Reading True PDA ...
Using /lib/stun_ahb.ko
DRIVER VERSION: 3.0
---dsl is off--
---dsl is off--
sm_drv_traffice_init called
Received the MAC Address trap
init_mac(): 0:22:93:22:f7:91
Waiting for message from kernel
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
SIOCGIFFLAGS: No such device
in atm_dev_register, acQosAdslName bunatm
---dsl is off--
Starting pid 251, console /dev/ttyS0: '/sbin/ge
ZXV10-H108B login: MSG(0x003) module proc_msg_init
envdb-enable =
ct_jffs2 exist!
=========== mount ct_jffs ===========
No need to syn version!
received link state trap
LOG(0x103) module set_apply_conf:syslogd process not run
[time stat] one second = 100 tick
bringup_interface_and_ssid:essid =CNC_xF7w , ,wlan_old = 0
---dsl is off--
---dsl is off--
WLAN(0x20213) module Create a new wireless interface wlan0
wlan mode modify: mode = 3
received link state trap
received link state trap
rate modify: tx rate = auto
beacon modify: beacon = 100
channel modify :channel = auto
power modify: :tx_power = 1
Disable_wlan_security:find paed process
init_wlan_security :status = 2 enh_security = 0
etc filename = /etc/paed/paed.wlan0.conf
isfs filename = /isfs/paed.wlan0.conf
wps filename = /etc/wsc_config.txt
init_wlan_security :wpa2_type = 1 ,[1:wpa,2:wpa2,3:mixed]
wlan0_wpa_wpa2_flag = 1
start wps ...............
end init_wlan_security
wlan_init :max power is = 19 dBm tx_power = 1
rf_switch_act:state = 1 [0-off ,1-on]
turning on wlan led ,but don't set status
WLAN(0x20213) module wlan0 interface up!
[time stat] use 10 second 1029 tick by WLAN module init.
SF(0x110401) module firewall set spi 0
SF(0x110401) module firewall set telecom high level
########## set sip power enter #########
########## set sip power sip -1 h323 -1 rtsp 1 ########
set rtsp 1
######## set sip power enter sip 0 h323 0 rtsp 1 #######
########## set sip power enter #########
########## set sip power sip -1 h323 1 rtsp -1 ########
set h323 1
######## set sip power enter sip 0 h323 1 rtsp 1 #######
setsockopt error
SF(0x110401) module SFS alg, type 8, value 1
setsockopt error
SF(0x110401) module SFS alg, type 7, value 1
[time stat] use 2 second 137 tick by SF module init.
ETH(0x20212) module init_emacphy is called
ETH(0x20212) module switch eth is 0
readmac: 2, 00-22-93-22-f7-92
readmac: 3, 00-22-93-22-f7-93
readmac: 4, 00-22-93-22-net/bridge/br_ioctl.c,old_deviceless636:c
f7-94
readmac: 5, 00-22-93-22-f7-95
readmac: 1, 00-22-93-22-f7-91
g_dhcpswitch.dhcpswitch in dhcpsr_init:|00110000|
br_cmd_setportsdhcprelay arg1= 00110000
set ports for dhcprelay |c|________
DDNS_DNS(0x10601) module dnsmasq start successful
received link state trap
[time stat] use 2 second 251 tick by PROUTE module init.
TIME(0x10602) module msntp start successful
PF(0x411) module initializing port mapping...
oid to set wps led sent
count = 35 exclude_unencrypted
count 1 = 35
open tr069 domain file failure!
PT(0x412) module initializing pt ......
cmd is |brctl setmacfdft 0|
WF(0x100413) module webfilter init success
SC(0x426) module initializing service control...
DMZ(0x425) module initializing DMZ...
WEBD(0x114) module webd start
FILE:thttpd.c, master_init: 510, iret:0
DEVICE PIN: 22779472
USB mount start send dev info~~~~
res MSG_USB_CONF_DEV_ON strat
[time stat] use 5 second 529 tick by FILEMANAGE module init.
Ingress(0x10304) module initializing ingress config module
init_mid_conf_data start
paed master_init success
pConfig->enable=0
pConfig->port=23
pConfig->userName=root
pConfig->userPass=root
pConfig->enable=0
pConfig->port=23
pConfig->userName=root
pConfig->userPass=root
SHADOW_FILE
tmpStry=root:ABE3UhboE3geg:12086::99999::::
tmpStrg=root:ABE3UhboE3geg:12086::99999::::
*******read telnet port**********
Read file "/var/tmp/telnet.conf".
port=23
*******read telnet port ok **********
portnbr=23
CORE(0x007) module 104001 the device finish reboot
[time stat] use 23 second 2293 tick by oam init.
BRIDGE(0x40224) module add a interface wlan0 into bridge br0
wlan0 has in br
gDevInfo.p_modelname=H108B
manage: br2684ctl -r 0
manage: br2684ctl -b -c 0 -e 0 -q UBR,aal5:max_pcr=3000,pcr=3000,max_cdv=500000,mbs=45 -a 88.88
manage: br2684ctl -r 1
manage: br2684ctl -b -c 1 -e 0 -q UBR,aal5:max_pcr=3000,pcr=3000,max_cdv=500000,mbs=45 -a 0.35
manage: br2684ctl -r 2
manage: br2684ctl -b -c 2 -e 0 -q UBR,aal5:max_pcr=3000,pcr=3000,max_cdv=500000,mbs=45 -a 88.90
manage: br2684ctl -r 3
manage: br2684ctl -b -c 3 -e 0 -q UBR,aal5:max_pcr=3000,pcr=3000,max_cdv=500000,mbs=45 -a 88.89
turning on wlan led ,set led
received link state trap
[time stat] use 13 second 1301 tick by WANBRIDGE module deal sys msg (msg id is 0x0B06,from module id is 0x0201).
[time stat] use 13 second 1356 tick by IFCORE module deal unicast msg (msg id is 0x0001,from module id is 0x0000).
MSG(0x003) module deal_unicast_msg:module don't find
MSG(0x003) module deal_unicast_msg:module don't find
TR069(0x112) module TR069 process start success!
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
******* MODE: AP with built-in Registrar and UPnP Proxy *******
MSG(0x003) module deal_unicast_msg:module don't find
MSG(0x003) module deal_unicast_msg:module don't find
MSG(0x003) module deal_unicast_msg:module don't find
MSG(0x003) module deal_unicast_msg:module don't find
MSG(0x003) module deal_unicast_msg:module don't find
BRIDGE(0x40224) module creat a new bridge br0, key is bridge0
IFCORE(0x201) module IFCore want to add a wan connection!
BRIDGE(0x40224) module add a interface usb0 into bridge br0
enable tr069
BRIDGE(0x40224) module add a interface wlan0 into bridge br0
device wlan0 entered promiscuous mode
br0: port 1(wlan0) entering learning state
sendigmpquery if name is not wan port,but wlan0
br0: topology change detected, propagating
br0: port 1(wlan0) entering forwarding state
BRIDGE(0x40224) module add a interface eth0 into bridge br0
device eth0 entered promiscuous mode
BRIDGE(0x40224) module add a interface eth1 into bridge br0
device eth1 entered promiscuous mode
BRIDGE(0x40224) module add a interface eth2 into bridge br0
device eth2 entered promiscuous mode
BRIDGE(0x40224) module add a interface eth3 into bridge br0
device eth3 entered promiscuous mode
BRIDGE(0x40224) module add a interface nbif1 into bridge br0
device nbif1 entered promiscuous mode
br0: port 6(nbif1) entering learning state
send igmpquery ok for nbif1
br0: topology change detected, propagating
br0: port 6(nbif1) entering forwarding state
BRIDGE(0x40224) module add a interface nbif2 into bridge br0
device nbif2 entered promiscuous mode
br0: port 7(nbif2) entering learning state
send igmpquery ok for nbif2
br0: topology change detected, propagating
br0: port 7(nbif2) entering forwarding state
BRIDGE(0x40224) module add a interface nbif3 into bridge br0
device nbif3 entered promiscuous mode
br0: port 8(nbif3) entering learning state
send igmpquery ok for nbif3
br0: topology change detected, propagating
br0: port 8(nbif3) entering forwarding state
[time stat] use 1 second 117 tick by BRIDGE module deal unicast msg (msg id is 0x0B06,from module id is 0x0201).
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
IFCORE(0x201) module Create a Wan Connection successfully!
PPP(0x80231) module pppoe call proxy !&key=DSL0.PVC0.WB0.ppp0&realif=N/A&type=524849&woltype=wan&conntype=PPPoE&connname=1_TR069_R_88_88&servicename=TR069&wiu_name=1_TR069_R_88_88&user=bjcnc-hgw@hgw-nms&pass=s1b5x7z9&enable=0&maxuser=4&lanif=&opt=1&servicelist=TR069&! add w
PROUTE(0x10252) module pr_do_msg, msg 715
PROUTE(0x10252) module pr_do_msg, key DSL0.PVC0.WB0.ppp0, ifname 1_TR069_R_88_88, wantype 1
PROUTE(0x10252) module pr_do_msg, msg 714
PROUTE(0x10252) module pr_do_msg, opr 1, key DSL0.PVC0.WB0.ppp0, ifname 1_TR069_R_88_88, ipaddr
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
cmd_add_instance_ex: oid=419 fkey=DSL0.PVC1 iid=2 okey=DSL0.PVC1.WB1.ppp1
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
cmd_add_instance_ex: oid=419 fkey=DSL0.PVC2 iid=3 okey=DSL0.PVC2.WB2.ppp2
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
cmd_add_instance_ex: oid=419 fkey=DSL0.PVC3 iid=4 okey=DSL0.PVC3.WB3.ppp3
IP(0x80232) module ip_do_msg, msg b06
IFCORE(0x201) module Create a Wan Connection successfully!
IP(0x80232) module ip_do_kernel_lan, cmd ifconfig br0 192.168.1.1 netmask 255.255.255.0
DHCPSR(0x10604) module key=bridge0.IP0 ifname=br0 ipaddr=192.168.1.1 opt=1
DHCPSR(0x10604) module can't get dns from DNS MM
DHCPSR(0x10604) module can't get domain from DNS MM
DHCPSR(0x10604) module can't get NTP from DNS MM
DHCPSR(0x10604) module start udhcpd pid = 683
DHCPSR(0x10604) module start udhcpd pid = 683
[time stat] use 1 second 110 tick by DHCPSR module deal sys msg (msg id is 0x070F,from module id is 0x0232).
ROUTE(0x10251) module rt_do_msg, msg 710
row id =-1
ROUTE(0x10251) Bridge Multicasting for br0 is Enabled.
module rt_do_msg, if langroup1, key bridge0.IP0, ip
ROUTE(0x10251) module rt_do_msg, servicetype 0, bindinfo 2
IFCORE(0x201) module Create Wan Connection Success: ip is |192.168.1.1|, realif is |br0|
IFCORE(0x201) module IFCore: send ipchange to voip control!
IFCORE(0x201) module IFCore: send ipchange to snmp control!
[time stat] use 1 second 114 tick by IP module deal unicast msg (msg id is 0x0B06,from module id is 0x0201).
IGMP(0x10603) module enable snooping
DHCPSR(0x10604) module reload dhcpd config file!
DDNS_DNS(0x10601) module dnsmasq stop successful
DDNS_DNS(0x10601) module dnsmasq start successful
ROUTE(0x10251) module rt_do_msg, msg b02
PROUTE(0x10252) module pr_do_msg, msg b02
TIME(0x10602) module msntp start successful
Ingress(0x10304) module pBuffer = |&connname=langroup1&|
Ingress(0x10304) module as langroup1 up， ingress rule on which enabled
UPNP(0x10801) module The msg id is 2818.
handleUDPEXSignal: Get Msg!
handleUDPEXSignal: Initialize UDPEX OK!
[time stat] use 4 second 410 tick by UPNP module deal multcast msg (msg id is 0x0B02,from module id is 0x0201).
MSG(0x003) module deal_unicast_msg:module don't find
MSG(0x003) module deal_unicast_msg:module don't find
[time stat] use 21 second 2182 tick by msg main.
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
ReadOwnMsg if_down
in trans status cmd from:tr069
TR069(0x112) module have been configed successfully
in trans status cmd from:tr069
CMD(0x004) module end trans
TR069(0x112) module tr069_send_param_attr:start
TR069(0x112) module tr069_send_param_attr:InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.CTMgtIPAddress=8&InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.CTUserIPAddress1=8&InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.MgtDNS=8&InternetGatewayDevic
RecvNotifyInitMsg start
pMsg:InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.CTMgtIPAddress=8&InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.CTUserIPAddress1=8&InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.MgtDNS=8&InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.InternetPvc=8&InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.MiddlewareURL=8
tr069 add_param_notity:szPath:InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.CTMgtIPAddress, attr:8
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity:fail get getObjId
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity no notify
tr069 add_param_notity:szPath:InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.CTUserIPAddress1, attr:8
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity:fail get getObjId
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity no notify
tr069 add_param_notity:szPath:InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.MgtDNS, attr:8
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity:fail get getObjId
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity no notify
tr069 add_param_notity:szPath:InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.InternetPvc, attr:8
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity:fail get getObjId
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity no notify
tr069 add_param_notity:szPath:InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.MiddlewareURL, attr:8
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity:fail get getObjId
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity no notify
RecvNotifyInitMsg end
IFCORE(0x201) module Wan Connection |br0|'s ip changed
DHCPSR(0x10604) module reload dhcpd config file!
DDNS_DNS(0x10601) module dnsmasq stop successful
DDNS_DNS(0x10601) module dnsmasq start successful
ROUTE(0x10251) module rt_do_msg, msg b01
ROUTE(0x10251) module rt_do_msg, key bridge0.IP0
PROUTE(0x10252) module pr_do_msg, msg b01
PROUTE(0x10252) module pr_do_msg, key bridge0.IP0
UPNP(0x10801) module The msg id is 2817.
handleUDPEXSignal: Get Msg!
handleUDPEXSignal: Initialize UDPEX OK!
ROUTE(0x10251) module rt_do_cmd, cmd 5
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
IP(0x80232) module ip_do_cmd, cmd 5
in wlan do_cmd_mget
out wlan do_cmd_mget ok
WEPKey(0x609) module do_cmd_mget wepkey called quit ok
in psk do_cmd_mget
out psk do_cmd_mget ok
IP(0x80232) module ip_do_cmd, cmd 5
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
IP(0x80232) module ip_do_cmd, cmd 5
IP(0x80232) module ip_do_cmd, cmd 5
IP(0x80232) module ip_do_cmd, cmd 5
in trans status cmd from:tr069
TR069(0x112) module have been configed successfully
in trans status cmd from:tr069
CMD(0x004) module end trans
ROUTE(0x10251) module rt_do_cmd, cmd 5
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
IP(0x80232) module ip_do_cmd, cmd 5
IP(0x80232) module ip_do_cmd, cmd 5
IP(0x80232) module ip_do_cmd, cmd 5
IP(0x80232) module ip_do_cmd, cmd 5
in trans status cmd from:tr069
TR069(0x112) module have been configed successfully
in trans status cmd from:tr069
CMD(0x004) module end trans
ReadOwnMsg if_down
ReadOwnMsg if_down
---dsl is off--
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
---dsl is off--
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
ReadOwnMsg if_down |
|
粤公网安备44152102000001号 
发表于 2010-4-23 20:34:43