|
发表于 2010-7-17 14:12:58
|
显示全部楼层
DB120-B1 TTL刷 DSL-2740B EU_3.03
本帖最后由 zengcf 于 2010-7-17 14:34 编辑
Product: DSL-2740B Firmware Version: EU_3.03
Board ID : | 96358GW | Software Version : | EU_3.03 | Bootloader (CFE) Version : | 1.0.37-11.3 | Wireless Driver Version : | 4.174.64.18.cpe1.0 |
(1)界面漂亮、流畅
(2)无线WEP、WPA、WPA2正常
(3)Board Id选择96358VW2和96358GWVG时LAN4能使用,但机器自动重启;选择96358GW时正常启动,但LAN4不能使用
(4)未发现其它问题
CFE version 1.0.37-10.3 for BCM96358 (32bit,SP,BE)
Build Date: Thu Feb 12 13:10:57 CST 2009 (root@localhost.localdomain)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT|S29GL128-A, id 0x2201, size 16384KB
Flash Layout: Boot[0,0xbe000000] Kern[1,0xbe020000]
AuxFS[95,0xbebe0000] Misc[126,0xbefc0000] PSI[127,0xbefe0000]
Flash RootFS Partition Length: 12320768
CFE using EMAC 0
Auto-negotiation timed-out
10 MB Half-Duplex (assumed)
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x805285D0 (1209808)
Initialized Data: 0x8041E210 - 0x8041FDF0 (7136)
BSS Area: 0x8041FDF0 - 0x804265D0 (26592)
Local Heap: 0x804265D0 - 0x805265D0 (1048576)
Stack Area: 0x805265D0 - 0x805285D0 (8192)
Text (code) segment: 0x80401000 - 0x8041E210 (119312)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.159
Gateway IP address :
Run from flash/host (f/h) : h
Default host run file name : 308nfs6358
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-2) : 96358VW2
Number of MAC Addresses (1-32) : 24
Base MAC Address : 00:1e:40:47:21:35
PSI Size (1-64) KBytes : 24
Flash Block Size (1-128) in KBytes: 128
Auxillary File System Size Percent: 25
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 111
CFE>
web info: Waiting for connection on socket 0.[J
CFE> f
Loading 192.168.1.100:bcm963xx_fs_kernel ...
Finished loading 3957606 bytes
Flashing CFE: .
Flashing root file system and kernel at 0xbe800000: ..............................
.
*** Image flash done *** !
Resetting board...
CFE version 1.0.37-11.3 for BCM96358 (32bit,SP,BE)
Build Date: 涓? 5鏈?28 22:37:40 CST 2008 (root@fc6.ayecom.com)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x805284A0 (1209504)
Initialized Data: 0x8041D840 - 0x8041FCC0 (9344)
BSS Area: 0x8041FCC0 - 0x804264A0 (26592)
Local Heap: 0x804264A0 - 0x805264A0 (1048576)
Stack Area: 0x805264A0 - 0x805284A0 (8192)
Text (code) segment: 0x80401000 - 0x8041D83C (116796)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) :
Board Id (0-15) : 96358GW
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:74:04:e4:97:4f
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 111
CFE>
web info: Waiting for connection on socket 0.[J
CFE>
CFE> help
Available commands:
w Write the whole image start from beginning of the flash
e Erase [n]vram or [a]ll flash except bootrom
r Run program from flash image or from host depend on [f/h] flag
p Print boot line and board parameter info
c Change booline parameters
f Write image to the flash
i Erase persistent storage data
b Change board parameters
reset Reset the board
flashimage Flashes a compressed image after the bootloader.
help Obtain help for CFE commands
For more information about a command, enter 'help command-name'
*** command status = 0
CFE> p
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) :
Board Id (0-15) : 96358GW
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:74:04:e4:97:4f
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
*** command status = 0
CFE> e n
Erase nvram? (y/n):y
Resetting board...
CFE version 1.0.37-11.3 for BCM96358 (32bit,SP,BE)
Build Date: 涓? 5鏈?28 22:37:40 CST 2008 (root@fc6.ayecom.com)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
*** Board is not initialized properly ***
Press: <enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
96358VW2 ------- 0
96358VW ------- 1
96358GWVG ------- 2
96358-502V ------- 3
96358MV2G ------- 4
96358M ------- 5
96358B ------- 6
96358BGWE_OEM1 ------- 7
96359PONG ------- 8
96358VW-8 ------- 9
96358SV ------- 10
96358GW ------- 11
96358VW-10 ------- 12
96358VW-11 ------- 13
96358VW-12 ------- 14
96358VW-13 ------- 15
Board Id (0-15) : 11
Number of MAC Addresses (1-32) : 10 12
Base MAC Address : 00:10:18:00:00:00 00:17:16:00:00:00
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x805284A0 (1209504)
Initialized Data: 0x8041D840 - 0x8041FCC0 (9344)
BSS Area: 0x8041FCC0 - 0x804264A0 (26592)
Local Heap: 0x804264A0 - 0x805264A0 (1048576)
Stack Area: 0x805264A0 - 0x805284A0 (8192)
Text (code) segment: 0x80401000 - 0x8041D83C (116796)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Use default boot line parameters: e=192.168.1.1:ffffff00 h=192.168.1.100 g= r=f f=vmlinux i=bcm963xx_fs_kernel d=1 p=0
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-15) : 96358GW
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:17:16:00:00:00
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 111
CFE>
web info: Waiting for connection on socket 0.[J
CFE>
CFE> p
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-15) : 96358GW
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:17:16:00:00:00
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
*** command status = 0
CFE> reset
Resetting board...
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?注册
×
|