|
|
刷固件断电的F5D8631-4，终于有了启动信息：
D%G - Power failure detected. ADSL Link down.
CFE version 1.0.37-8.7 for BCM96358 (32bit,SP,BE)
Build Date: Fri Aug 10 21:46:19 CST 2007 (root@RH9)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbfc00000
Initializing Arena.
Initializing Devices.
Parallel flash device: name MX29LV320AT, id 0x22a7, size 4096KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x80527980 (1206656)
Initialized Data: 0x8041D3F0 - 0x8041F1B0 (7616)
BSS Area: 0x8041F1B0 - 0x80425980 (26576)
Local Heap: 0x80425980 - 0x80525980 (1048576)
Stack Area: 0x80525980 - 0x80527980 (8192)
Text (code) segment: 0x80401000 - 0x8041D3EC (115692)
Boot area (physical): 0x00528000 - 0x00568000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-6) : 96358GW
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:17:3f:91:c0:b9
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Code Address: 0x80010000, Entry Address: 0x801c4018
Decompression OK!
Entry at 0x801c4018
Closing network.
Starting program at 0x801c4018
Linux version 2.6.8.1 (root@RH9) (gcc version 3.4.2) #1 Tue Dec 5 18:01:38 CST 2006
Parallel flash device: name MX29LV320AT, id 0x22a7, size 4096KB
Total Flash size: 4096K with 71 sectors
96358GW prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 007a0000 @ 00000000 (usable)
On node 0 totalpages: 1952
DMA zone: 1952 pages, LIFO batch:1
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 32 (order 5: 256 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 5712k/7808k available (1518k kernel code, 2076k reserved, 221k data, 72k init, 0k highmem)
Calibrating delay loop... 299.00 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
MPI: Detected 5 vdc 16-bit PCMCIA card
Can't analyze prologue code at 8018a164
usbcore: registered new driver hub
Initializing Cryptographic API
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
ehci_hcd 0000:00:0a.0: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ehci_hcd 0000:00:0a.0: irq 18, pci mem c0000300
ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:0a.0
ehci_hcd 0000:00:0a.0: USB f.f enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
ohci_hcd 0000:00:09.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:09.0 to 64
ohci_hcd 0000:00:09.0: irq 13, pci mem c0002400
ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
brcmboard: brcm_board_init entry
SES: Button GPIO 0x8025 is enabled
SES: Button Interrupt 0x3 is enabled
SES: LED GPIO 0x8025 is enabled
bcm963xx_serial driver v2.0
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Ebtables v2.0 registered
hub 1-0:1.0: over-current change on port 2
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 72k freed
init started: BusyBox v1.00 (2006.12.05-10:04+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
BusyBox v1.00 (2006.12.05-10:04+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
atmapi: module license 'Proprietary' taints kernel.
blaadd: blaa_detect entry
adsl: adsl_init entry
Broadcom BCMPROCFS v1.0 initialized
Broadcom BCM6358A1 Ethernet Network Device v0.3 Dec 5 2006 18:00:15
Config Internal PHY Through MDIO
BCM63xx_ENET: Auto-negotiation timed-out
BCM63xx_ENET: 10 MB Half-Duplex (assumed)
eth0: MAC Address: 00:17:3F:91:C0:B9
Broadcom BCM6358A1 Ethernet Network Device v0.3 Dec 5 2006 18:00:15
Config Ethernet Switch Through MDIO
dgasp: kerSysRegisterDyingGaspHandler: eth1 registered
eth1: MAC Address: 00:17:3F:91:C0:B9
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
wl0: Broadcom BCM4329 802.11 Wireless Controller 4.80.53.0.cpe2.1
dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
eth1 Link UP.
BcmAdsl_Initialize=0xC0067388, g_pFnNotifyCallback=0xC007E704
pSdramPHY=0xA07FFFF8, 0xFFFFFFFF 0xFFFFFFFF
AdslCoreHwReset: AdslOemDataAddr = 0xA07FB404
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
atmctl: page allocation failure. order:5, mode:0xd0
Call Trace: [<8005347c>] [<800533e4>] [<800534dc>] [<800570a8>] [<800531d0>] [<8005791c>] [<80057510>] [<800534dc>] [<801d0000>] [<800123a0>] [<c002f87c>] [<8003e948>] [<c0031ae4>] [<801d0000>] [<800123d8>] [<c00319e0>] [<c00320a4>] [<c00329f8>] [<8001213c>] [<c00351b4>] [<80075a80>] [<c00291b0>] [<800d3928>] [<80079b70>] [<80061904>] [<c0029080>] [<c0029120>] [<c00292dc>] [<c002932c>] [<c0029638>] [<c002969c>] [<c00297ec>] [<c002991c>] [<c0029a20>] [<c0029afc>] [<c0029c04>] [<c0029d38>] [<c0029e7c>] [<c0029fb4>] [<c002a0c0>] [<c002aab0>] [<c002a1f8>] [<c002af80>] [<c002a990>] [<c00293d8>] [<c0029534>] [<c0029f84>] [<8007fbf4>] [<8006aeb0>] [<8006ae80>] [<8001a788>] [<80099990>]
atmctl: ATM driver return code, memory allocation error
atmctl: ATM driver return code, state error
loading iptables
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (61 buckets, 0 max) - 368 bytes per conntrack
ip_conntrack_pptp version 2.1 loaded
ip_nat_pptp version 2.0 loaded
ip_conntrack_h323: init
ip_nat_h323: initialize the module!
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
ipt_time loading
==> Bcm963xx Software Version: 3.06L.06V.A2pB021g.d19d <==
==> Bcm963xx Software Version: 3.06L.06V.A2pB021g.d19d <==
device eth0 entered promiscuous mode
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
device eth1 entered promiscuous mode
br0: port 2(eth1) entering learning state
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
停在这里了。。。
不知道怎么回事。。 |
|
粤公网安备44152102000001号 
发表于 2010-1-20 20:47:23
发表于 2010-1-20 23:22:58