|
|
这是超级终端信息 现在刷哪个固件都是这种情况. 2.97 3.01 1.14 联通 都刷了就是这样启动到 D%G 然后重启 插上TTL 线能进CFE升级界面 每个都刷了好几遍
flash芯片是S29GL128 但下面显示Parallel flashflash device: name AM29LV320MT, id 0x2201, size 16384KB 是怎么回事啊？ 用JTAG刷的CFE是公版CFE1[1].0.37-10.1 请大家救救
CFE version 1.0.37-10.1 for BCM96358 (32bit,SP,BE)
Build Date: Tue Apr 24 15:57:24 CST 2007 (gavin@FD5)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x80527C50 (1207376)
Initialized Data: 0x8041D580 - 0x8041F480 (7936)
BSS Area: 0x8041F480 - 0x80425C50 (26576)
Local Heap: 0x80425C50 - 0x80525C50 (1048576)
Stack Area: 0x80525C50 - 0x80527C50 (8192)
Text (code) segment: 0x80401000 - 0x8041D57C (116092)
Boot area (physical): 0x00528000 - 0x00568000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-8) : 96358VW2
Number of MAC Addresses (1-32) : 24
Base MAC Address : 00:1f:a3:47:70:6a
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from only image (0xbe800000) ...ef: 64MHzernelS0,115200:
Code Address: 0x80010000, Entry Address: 0x801ac018: Button
Board IP address
ecompression OK!delay (0-9 seco
Entry at 0x801ac018
Total mem
Closing network.es (32MB)..upt d
Starting program at 0x801ac018
Linux version 2.6.8.1 (root@DU) (gcc version 3.4.2) #1 Wed Apr 29 08:25:50 CST 2C50 (1207376)ay, linesi
009
Parallel flashflash device: name AM29LV320MT, id 0x2201, size 16384KB
Initialized Data: 0x8041D580 - 0x804
96358VW2 prom init0:1f:a3:47:70:6a b
CPU revision is: 0002a010roo
Determined physical RAM map:
memory: 01fa0000 @ 00000000 (usable)BSS Area: 0x8041F480
On node 0 totalpages: 8096 bytes) (C) 2000-20
DMA zone: 4096 pages, LIFO batch:1
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 128 (order 7: 1024 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30160k/32384k available (1429k kernel code, 2180k reserved, 215k data, 7
2k init, 0k highmem)
KLOB Pool 1 Initialized: 1048576 bytes <0x80e00000 ... 0x80f00000>
Calibrating delay loop... 299.00 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Total Flash size: 16384K with 128 sectors
File system address: 0xbe800100
Can't analyze prologue code at 80173cc4
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
brcmboard: brcm_board_init entry
D%G |
|
粤公网安备44152102000001号 
发表于 2010-1-20 18:32:31