找回密码
 注册

QQ登录

只需一步,快速开始

查看: 5094|回复: 8

DB120-B1砖了吗?高手指点?能进CFE,能进WEB,但刷不成功

[复制链接]
发表于 2009-11-19 09:27:56 | 显示全部楼层 |阅读模式
拿到一个DB120-B1,软件版本也没有问题,FLASH芯片也没有问题,但当时没有TTL线,用WEB方式刷的 bcm96358GW_1.3_96358VW2 这个固件,然后亮红灯。偶尔重新开机也能亮绿灯,也能进入192.168.1.1.
昨天买了一根TTL线,能进入CFE,经过设置后,但只有LAN4口能PING通192.168.1.1,但用这个口再刷固件时报错,无法刷成功,是不是撤底砖了?
发表于 2009-11-19 09:38:19 | 显示全部楼层
重新用正确的固件再刷新吧!还需要在ttl数据线连接设置一下启动参数
发表于 2009-11-19 09:40:26 | 显示全部楼层
能PING通就没砖头
接好TTL线,打开电源,在TTL启动信息可以看到的时候就狂按回车,进入CFE之后,哪个LAN口 PING的通网线就插哪里,设置本地为192.168.1.100,然后访问192.168.1.1,就可以进WEB再刷;
你这个可能是BOARD ID之类的没设置对,重新设置下
 楼主| 发表于 2009-11-19 09:41:09 | 显示全部楼层
重新用正确的固件再刷新吧!还需要在ttl数据线连接设置一下启动参数
YES东 发表于 2009-11-19 09:38


老大,给正确固件的地址吧,我在这里下载了好多个。那个启动参数怎么设置!
 楼主| 发表于 2009-11-19 20:49:16 | 显示全部楼层
完蛋了,FLASH好像坏了,高手指点下:


CFE version 1.0.37-10.3 for BCM96358 (32bit,SP,BE)
Build Date: 二  1月 29 07:41:15 CST 2008 (root@ZTJ)
Copyright (C) 2000-2006 Broadcom Corporation.

Boot Address 0xbe000000

Initializing Arena.
Initializing Devices.
Parallel flash device id 0279 is not supported.

*** Board is not initialized properly ***

Press:  <enter> to use current value
        '-' to go previous parameter
        '.' to clear the current value
        'x' to exit this command
96358VW2         ------- 0
96358VW          ------- 1
96358GWVG        ------- 2
96358MV2G        ------- 3
96358M           ------- 4
96358B           ------- 5
96358BGWE_OEM1   ------- 6
96359PONG        ------- 7
96358SV          ------- 8
96358VW2_b20     ------- 9
Board Id (0-9)                    :  0
Number of MAC Addresses (1-32)    :  0  12
Base MAC Address                  :  00:00:00:00:00:00  00:1e:40:7a:be:61
PSI Size (1-64) KBytes            :  24
Flash Block Size (1-128) in KBytes:  0  128
Auxillary File System Size Percent:  0
Main Thread Number [0|1]          :  0
Flash layout changed. Need to erase all flash except bootrom
Invalid command: "e"
Available commands:

Flash Layout: Boot[0,0x00000000] Kern[-1,0xbdffffff]
              AuxFS[-1,0x00000000] Misc[-1,0x00000000] PSI[-1,0x00000000]
Flash RootFS Partition Length: 1107296257
Auto-negotiation timed-out
10 MB Half-Duplex (assumed)
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)

Total memory used by CFE:  0x80401000 - 0x805285A0 (1209760)
Initialized Data:          0x8041DD30 - 0x8041FDC0 (8336)
BSS Area:                  0x8041FDC0 - 0x804265A0 (26592)
Local Heap:                0x804265A0 - 0x805265A0 (1048576)
Stack Area:                0x805265A0 - 0x805285A0 (8192)
Text (code) segment:       0x80401000 - 0x8041DD30 (118064)
Boot area (physical):      0x00529000 - 0x00569000
Relocation Factor:         I:00000000 - D:00000000

Use default boot line parameters: e=192.168.1.1:ffffff00 h=192.168.1.159 g= r=h
f=308nfs6358 i=bcm963xx_fs_kernel d=1 p=0
Board IP address                  : 192.168.1.1:ffffff00
Host IP address                   : 192.168.1.159
Gateway IP address                :
Run from flash/host (f/h)         : h
Default host run file name        : 308nfs6358
Default host flash file name      : bcm963xx_fs_kernel
Boot delay (0-9 seconds)          : 1
Board Id (0-9)                    :
Number of MAC Addresses (1-32)    : 0
Base MAC Address                  : 00:00:00:00:00:00
PSI Size (1-64) KBytes            : 24
Flash Block Size (1-128) in KBytes: 0
Auxillary File System Size Percent: 0
Main Thread Number [0|1]          : 0

*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 1
web info: Waiting for connection on socket 0.
CFE>
CFE>
 楼主| 发表于 2009-11-19 21:40:11 | 显示全部楼层
web info: Waiting for connection on socket 1.
web info: Waiting for connection on socket 0.
web info: Upload 3982716 bytes, Broadcom image format.
CFE>
Flashing root file system and kernel at 0xbdffffff: Failed to flash root file sy
stem. Error: -1

Resetting board...

CFE version 1.0.37-10.3 for BCM96358 (32bit,SP,BE)
Build Date: 二  1月 29 07:41:15 CST 2008 (root@ZTJ)
Copyright (C) 2000-2006 Broadcom Corporation.
 楼主| 发表于 2009-11-19 21:41:07 | 显示全部楼层
web info: Waiting for connection on socket 1.
web info: Waiting for connection on socket 0.
web info: Upload 3982716 bytes, Broadcom image format.
CFE>
Flashing root file system and kernel at 0xbdffffff: Failed to flash root file sy
stem. Error: -1

Resetting board...

CFE version 1.0.37-10.3 for BCM96358 (32bit,SP,BE)
Build Date: 二  1月 29 07:41:15 CST 2008 (root@ZTJ)
Copyright (C) 2000-2006 Broadcom Corporation.
 楼主| 发表于 2009-11-20 10:33:21 | 显示全部楼层
风险真大,真不能直接用WEB方式,害死人了
发表于 2009-12-10 23:29:37 | 显示全部楼层
楼主刷好了吗,你现在用这种方式肯定是不行的,你的这个FLASH应该也是MX29系列的,要用编程器写才行,可以联系我。。。。
*滑块验证:
您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|小黑屋|宽带技术网 |网站地图 粤公网安备44152102000001号

GMT+8, 2025-5-20 01:47 , Processed in 0.029389 second(s), 3 queries , Redis On.

Powered by Discuz! X3.5 Licensed

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表