请教 一款THOMSON 7G BCM6348芯片的猫可以刷什么固件

ks99

目前收到1款THOMSON 7G的宽带猫 硬件配置如下,请问可以刷成什么通用的版本!目前原版的固件能拨上号,但电脑就是上不了网@!@..望有解决办法的哥们不惜赐教!可以亏本价拿样测试哈!给搞成功了送1片板子给玩...

Broadcom BCM4318
Broadcom BCM6348
8 Meg flash (S29GL064A11TFIR4)
32 Meg ram (奇梦达 HY839SC256160FE-7)
2xUSB
Serial interface (4 pin connector) 9600,8N1, Login Gearguy password Geardog

TTL启动信息如下

Speedtouch initialization sequence started.

[OSI2] File "ZZGM1.000": Format OSI2 compliant (offset=339, prodid="0", varid="0").
[SS] Device mounted (prodid="0", prodname="SpeedTouch 7G", varid="0", varname="").
[ELF] Loading file "ZZGM1.000" ...
call 0x0x80081040(ZZGM1.000 -t)

----------------------- OSBA -----------------------
version : bcm96348:MOD_BLDBCM96348_OSBA_V1.0.1
active device : /dev/fda1
passive device : /dev/fda2
active path : /active
passive path : /dl

Mounting /dev/fda1 as /active... success.
Mounting /dev/fda2 as /dl... success.
passive build index = 3
active build index = 2
remounting...
Unmounting /active... success.
Unmounting /dl... success.
Mounting /dev/fda1 as /dl... success.
Mounting /dev/fda2 as /active... success.
---------------- /active/CANTA06.2HD START ----------------

[OSI2] File "/active/CANTA06.2HD": Format OSI2 compliant (offset=339, prodid="0", varid="0").
[SS] Device mounted (prodid="0", prodname="SpeedTouch 7G", varid="0", varname="").
[ELF] Loading file "/active/CANTA06.2HD" ...
c

Speedtouch initialization sequence started.
For EMAC1 - select for the ST706/ST780.
For EMAC2 - select for the ST706/ST780.
b6w_init
Calibrating delay loop... 253.13 BogoMIPS
mpi: No Card is in the PCMCIA slot
mpi: device 0x4318 found in PCI slot 1, function 0
wl: srom not detected, using main memory mapped srom info (wombo board)
wl0: wlc_attach: using main broad MAC address base in NVRAM (wombo board srom: 6 )
wl0 MAC Address: 00:14:7F:CF:10:9C

appl_init: BUILD VERIFIED!
Username :

ks99

奇怪 帖子老是发不完整

YES东

目前原版的固件能拨上号,但电脑就是上不了网

这个你是电脑拔号还是内置路由功能拔号？如果是内置路由功能拔号的话检查nat功能是否开启，还有你自身电脑的网关和dns服务器地址是否填写正确

ks99

是内置路由功能拔号的!我再次试了下!将IP自动获取可以上去!但只能上QQ 网页非常难打开! 看了日志文件也没发现啥问题,估计是固件水土不服!所以想换个公版固件!!!!!! 现在就是不晓得用那款固件....
下面是硬件的图片