|
|
原帖不能编辑了，地址见https://www.chinadsl.net/thread-39582-1-1.html
我把TTL启动信息复制进来吧
CFE version 1.0.37-102.9 for BCM96358 (32bit,SP,BE)
Build Date: Thu Jan 15 20:34:16 PST 2009 (root@pclinux-lkaplan)
Copyright (C) 2000-2008 Broadcom Corporation.
Parallel flash device: name AM29LV320MT
Parallel flash device: name AM29LV320MT
10 MB Half-Duplex (assumed)
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Boot Address 0xbe000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : h
Default host run file name : 308nfs6358
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : 96358VW2
Number of MAC Addresses (1-32) : 24
Base MAC Address : 00:1f:a3:bc:62:d3
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
web info: Waiting for connection on socket 0.
CFE>
CFE> f
Loading 192.168.1.100:bcm963xx_fs_kernel ...
Loading failed.: CFE error -21
*** command status = -21
CFE> w 192.168.1.100:CUC_CFE.bin
Loading 192.168.1.100:CUC_CFE.bin ...
Loading failed.: CFE error -21
*** command status = -21
CFE> flashimage 192.168.1.100:CUC_CFE.bin
Loading 192.168.1.100:CUC_CFE.bin ...
Loading failed.: CFE error -21
*** command status = -21
CFE>
以上就是启动信息了；用tftp也上传不成功。无奈。
我在这个CFE>后面曾经输入过 e a，貌似是清除所有；
再下来就是这些了。现在是插电时四个 LAN灯亮起，然后灭掉，电源灯亮起，同时USB灯闪烁大约5秒，然后电源灯和USB灯一起灭掉，整个指示灯全部不亮；
插上网线后网线灯亮，本地地址设置为192.168.1.100，PING不通192.168.1.1，TFTP都不成功。
请问有什么好的方法吗? |
|
|Archiver|小黑屋|宽带技术网
|网站地图
发表于 2009-10-23 09:56:52
发表于 2009-10-23 15:01:05
