中兴108B进入超级终端，用户密码root提示错误

zyibm

用TTL衔接好了，进入LOGIN，输入用户名和密码都是root，提示错误

huang819

把端口速率都改成9600就可以了

zyibm

引导成功了，可是输入root，提示错误！！

huang819

你看看教程区有没有   我现在也正在找教程哦  我想把我的W300V2的全功能固件提取出来

zyibm

教程里介绍的都是root，可这个就是不行，是不是被联通改了，我这个是V1.2的

huang819

联通送的和电信的帐 密 不一样吧

huang819

DSP binary filesize = 356930 bytes
tn7dsl_init : env var DSL_BIT_TMODE is set
Texas Instruments ATM driver: version:[6.00.01.00]

~~in minihttpd arWaiting for enter to start '/bin/sh' (pid 38, terminal /dev/tts
/0)

Please press Enter to activate this console. $$$$$$$proc_newboot_defparams
UP MOde is adsl
==== In logic main ====
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device


ADSL default config is already here!
tr069_init: HardwareVersion=2.0.1
tr069_init: SerialNumber1= 4E1004000000001000000015EB4E2326
name MappingEntity
0000-00-00T00:00:08 cfgmgr(tr069glue): get parametervalues(ConnectionRequestURL)
: http://192.168.1.1:1050/
0000-00-00T00:00:08 cfgmgr(logic): instantiate_module: no module 'authright' reg
istered
0000-00-00T00:00:08 cfgmgr(logic): endElement: couldn't instantiate the module '
authright'
resolver: configuration tree:
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod0'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod0'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod1'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod1'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod2'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod2'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod3'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod3'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod4'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod4'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod5'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod5'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod6'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod6'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod7'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod7'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod8'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod8'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod9'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod9'
0000-00-00T00:00:14 cfgmgr(sar): oamPingInterval(20)(20)
0000-00-00T00:00:20 cfgmgr(resolver): stat successfull for /etc/resolv.conf.
0000-00-00T00:00:20 cfgmgr(sntp): NTP Polling Timer for DHCP Started succesfully
.
0000-00-00T00:00:20 cfgmgr(sar): DSL Polling Timer Started succesfully.
0000-00-00T00:00:20 cfgmgr(eth0):   &&&eth_start
0000-00-00T00:00:20 cfgmgr(eth0):   &&&eth_start, ifconfig
0000-00-00T00:00:20 cfgmgr(eth1):   &&&eth_start
0000-00-00T00:00:20 cfgmgr(eth2):   &&&eth_start
0000-00-00T00:00:20 cfgmgr(eth3):   &&&eth_start
0000-00-00T00:00:21 cfgmgr(fdb): Firewall NAT service started
0000-00-00T00:00:21 VFS: Mounted root (squashfs filesystem) readonly.
0000-00-00T00:00:21 : Mounted devfs on /dev
0000-00-00T00:00:21 Freeing unused kernel memory: 64k freed
0000-00-00T00:00:21 : Algorithmics/MIPS FPU Emulator v1.5
0000-00-00T00:00:21 USB: Entering USB_init_module.
0000-00-00T00:00:21 : USB Driver built for RNDIS-CDC protocols.
0000-00-00T00:00:21 : Error getting protocol configuration from bootloader envir
onment.
0000-00-00T00:00:21 : Defaulting to "RNDIS-CDC" mode.
0000-00-00T00:00:21 : VID = 0x451
0000-00-00T00:00:21 : PID = 0x6060
0000-00-00T00:00:21 : No Serial Number String present.
0000-00-00T00:00:21 : Manufacturer = Texas Instruments
0000-00-00T00:00:21 : Product description = Texas Instruments CDC Ethernet/RNDIS
Adapter
0000-00-00T00:00:21 USB: Entering USB_Init.
0000-00-00T00:00:21 USB: Leaving USB_Init.
0000-00-00T00:00:21 : Default Asymmetric MTU for usb0 1500
0000-00-00T00:00:21 USB: Leaving USB_init_module.
0000-00-00T00:00:21 : registered device TI Avalanche SAR
0000-00-00T00:00:21 : Ohio250(7200/7100A2) detected
0000-00-00T00:00:21 DBG----: autopvc_enable=1(1: autoPVC ok, 2: unK=1 and 54chg,
3: unK=0 Greg's suggestion) chInfo.FwdUnkVc set to 1.
0000-00-00T00:00:21 : DSP binary filesize = 356930 bytes
0000-00-00T00:00:22 tn7dsl_init : env var DSL_BIT_TMODE is set
0000-00-00T00:00:22 Texas Instruments ATM driver: version:[6.00.01.00]

0000-00-00T00:00:22 cfgmgr(ap): AP Acquiring Lock
0000-00-00T00:00:22 cfgmgr(ap): AP REPORT LOCK ACQUIRED
0000-00-00T00:00:22 cfgmgr(ap): wlan_handle_load_event - Acquired Lock
0000-00-00T00:00:23 cfgmgr(ap): MAC address : 00:15:eb:4e:23:26
Param InternetGatewayDevice.DeviceInfo.SoftwareVersion ===891=====PVALUE =======
                V1.0.3.T14B
0000-00-00T00:00:23 cfgmgr(lanbridge0): Bridge Created: br0
0000-00-00T00:00:24 cfgmgr(lanbridge1): Bridge Created: br1
0000-00-00T00:00:25 cfgmgr(lanbridge2): Bridge Created: br2
0000-00-00T00:00:25 cfgmgr(lanbridge3): Bridge Created: br3
0000-00-00T00:00:26 cfgmgr(lanbridge4): Bridge Created: br4
0000-00-00T00:00:26 cfgmgr(ap): WPA Authenticator Started
0000-00-00T00:00:26 cfgmgr(lanbridge0): Bridge Interface Added: eth0
WPA send hello to wlan drv
0000-00-00T00:00:28 cfgmgr(lanbridge0): Bridge Interface Added: eth1
0000-00-00T00:00:28 cfgmgr(lanbridge0): Bridge Interface Added: eth2
0000-00-00T00:00:29 cfgmgr(lanbridge0): Bridge Interface Added: eth3
0000-00-00T00:00:31 : Default Asymmetric MTU for br0 1500
0000-00-00T00:00:31 : Default Asymmetric MTU for br1 1500
0000-00-00T00:00:31 : Default Asymmetric MTU for br2 1500
0000-00-00T00:00:31 : Default Asymmetric MTU for br3 1500
0000-00-00T00:00:31 : Default Asymmetric MTU for br4 1500
0000-00-00T00:00:31 : Bridge Multicasting for br0 is now Enabled.
0000-00-00T00:00:31 : Bridge Multicasting for br1 is now Enabled.
0000-00-00T00:00:31 : Bridge Multicasting for br2 is now Enabled.
0000-00-00T00:00:31 : Bridge Multicasting for br3 is now Enabled.
0000-00-00T00:00:31 : Bridge Multicasting for br4 is now Enabled.
0000-00-00T00:00:31 cfgmgr(sar): DSL Carrier is down

hehe in pc message startlistenserver

in inetd_start_manufacture lanoip is 192.168.1.1
lano ip is 192.168.1.1

!!!!!set succeed initialize setsockopt IPPROTO_IP  IP_ADD_MEMBERSHIP

in pc_Intialize_manuctureSocket  manufacturefd is 10

in inetd_start_manufacture ret ==1 ,manufacture fd is 10
0000-00-00T00:00:35 : Default Asymmetric MTU for wlan0 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wlan1 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wlan2 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wlan3 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wdsup0 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wdsdw0 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wdsdw1 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wdsdw2 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wdsdw3 1500
0000-00-00T00:00:36 cfgmgr(ap): EEPROM len 473
0000-00-00T00:00:36 cfgmgr(ap): AP Driver configuration successful
0000-00-00T00:00:40 cfgmgr(ap): AP IS UP
0000-00-00T00:00:40 : Driver get WPA_HELLO MSG
0000-00-00T00:00:40 611: WDRV_MAINSM: WLAN Driver initialized successfully
0000-00-00T00:00:40 :
0000-00-00T00:00:40 611:              SSID=ZTE4E2326, BSSID=00-15-EB-4E-23-26
0000-00-00T00:00:40 611:  AP Power Level = 1
0000-00-00T00:00:40 611:  Regulatory Domain = ETSI
0000-00-00T00:00:40 611:           Channel=6
0000-00-00T00:00:40 cfgmgr(ap): AP Releasing Lock
0000-00-00T00:00:40 cfgmgr(ap): AP Sending IFACE UP
0000-00-00T00:00:42 cfgmgr(lanbridge0): Bridge Interface Added: wlan0

Basic POST completed...     Success.
Last reset cause: Hardware reset (Power-on reset)

ZXV10 W300A BOOT 1.0 rev: 1.4.2.0
ZXV10 W300A board 2.0.1
(c) Copyright 2004-2005 ZTE CORPORATION. All Rights Reserved.

Press ESC for monitor...

ZXV10 W300>

Booting...
Launching kernel decompressor.
Starting LZMA Uncompression Algorithm.
Copyright (C) 2003 Texas Instruments Incorporated; Copyright (C) 1999-2003 Igor
Pavlov.
Compressed file is LZMA format.
Kernel decompressor was successful ... launching kernel.

LINUX started...
Config serial console: ttyS0,9600
Auto Detection OHIO chip
This SOC has MDIX cababilities on chip.
WLAN 1350 chip configured.
CONFIG_AVALANCHE_VLYNQ_POLARITY_LOW
Success in setting up the VLYNQ.
CPU revision is: 00018448
Primary instruction cache 16kb, linesize 16 bytes (4 ways)
Primary data cache 8kb, linesize 16 bytes (4 ways)
Number of TLB entries 16.
Linux version 2.4.17_mvl21-malta-mips_fp_le (xial@localhost.localdomain) (gcc ve
rsion 2.96 20000731 (Red Hat Linux 7.3 2.96-113.2) neon) #1 五 4月 13 17:28:34 C
ST 2007
Determined physical RAM map:
memory: 14000000 @ 00000000 (reserved)
memory: 00020000 @ 14000000 (ROM data)
memory: 00fe0000 @ 14020000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
calculating r4koff... 00102c00(1059840)
CPU frequency 211.97 MHz
Calibrating delay loop... 211.35 BogoMIPS
Freeing Adam2 reserved memory [0x14001000,0x0001f000]
Memory: 14140k/16384k available (1645k kernel code, 2244k reserved, 79k data, 64
k init)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
TI Optimizations: Allocating TI-Cached Memory Pool.
Warning: Number of buffers is not configured.Setting default to 120
Using 120 Buffers for TI-Cached Memory Pool.
DEBUG: Using Hybrid Mode.
NSP Optimizations: Succesfully allocated TI-Cached Memory Pool.
Initializing RT netlink socket
DEBUG: Starting ksoftirqd with ALWAYS_SOFTIRQ:0x3 NON ALWAYS SOFTIRQ:0xfffffffc.

DEBUG: Starting ksoftirqd with priority:0 policy:0 nice:19.
Starting kswapd
Disabling the Out Of Memory Killer
devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
ticfg_name_select : board_hwversion ==0
pty: 32 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xa8610e00 (irq = 15) is a 16550A
Installed misc driver vlynq0: it handles vlynq bridge0 with 1 hop(s).
AVALANCHE_WATCHDOG_TIMER_BASE=a8611f00
block: 64 slots per queue, batch=16
Initializing the TI QoS NSP Framework.
DEBUG: Initializing the Network Queue Manager Algorithms.
DEBUG: Initialization of the Translation Unit.
DEBUG: Initializing the LOCAL High Priority Database Module.
DEBUG: Initialization of the LOCAL High Priority Database Module successful..
Succesfully Initialized the TI QoS NSP Framework.
cpmac_dev_probe : WAN MODE == adsl
Error getting CPMAC Configuration params for instance:0
Environment Variable:MACCFG_A not set in bootloader
Setting Default configuration params for CPMAC instance:0

MAC CFG : Tx Interrupts off , threshold : 20
cpmac_dev_init,EnableHwIGMP1
Default Asymmetric MTU for eth0 1500
Default Asymmetric MTU for eth1 1500
CPMAC: Registered switch port 1 with device eth1
Default Asymmetric MTU for eth2 1500
CPMAC: Registered switch port 2 with device eth2
Default Asymmetric MTU for eth3 1500
CPMAC: Registered switch port 3 with device eth3
Default Asymmetric MTU for eth4 1500
CPMAC: Registered switch port 4 with device eth4
TI CPMAC Linux DDA version 1.9 - CPMAC DDC version 0.3
Cpmac: Installed 1 instances.
Cpmac driver is allocating buffer memory at init time.
PPP generic driver version 2.4.1
avalanche flash device: 0x400000 at 0x10000000.
Found: Fujitsu S29GL032R3
Physically mapped flash:0: Found 1 x16 devices at 0x0 in 16-bit mode
number of JEDEC chips: 1
cfi_amdstd_setup :: Using buffer write method --- in w300
Avalanche: No single image format found. Using mtd env variables
Looking for mtd device :mtd0:
Avalanche: Adding a mtd0 image (0xd0000), with size (0x320000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x000d0000-0x003f0000 : "mtd0"
Avalanche:      linking partition mtd0: mtd0 -> ../../mtdblock/0
Looking for mtd device :mtd1:
Avalanche: Adding a mtd1 image (0x40000), with size (0x90000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00040000-0x000d0000 : "mtd1"
Avalanche:      linking partition mtd1: mtd1 -> ../../mtdblock/1
Looking for mtd device :mtd2:
Avalanche: Adding a mtd2 image (0x0), with size (0x10000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00000000-0x00010000 : "mtd2"
Avalanche:      linking partition mtd2: mtd2 -> ../../mtdblock/2
Looking for mtd device :mtd3:
Avalanche: Adding a mtd3 image (0x10000), with size (0x20000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00010000-0x00030000 : "mtd3"
Avalanche:      linking partition mtd3: mtd3 -> ../../mtdblock/3
Looking for mtd device :mtd4:
Avalanche: Adding a mtd4 image (0x40000), with size (0x3b0000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00040000-0x003f0000 : "mtd4"
Avalanche:      linking partition mtd4: mtd4 -> ../../mtdblock/4
Looking for mtd device :mtd5:
Avalanche: Adding a mtd5 image (0x30000), with size (0x10000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00030000-0x00040000 : "mtd5"
Avalanche:      linking partition mtd5: mtd5 -> ../../mtdblock/5
Looking for mtd device :mtd6:
Avalanche: Adding a mtd6 image (0x3f0000), with size (0x10000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x003f0000-0x00400000 : "mtd6"
Avalanche:      linking partition mtd6: mtd6 -> ../../mtdblock/6
Looking for mtd device :mtd7:
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.0 (128 buckets, 1024 max) - 372 bytes per conntrack
ip_ct_sip: registering helper for port 5060
ip_ct_sip: registering helper for port 5063
ip_tables: (C) 2000-2002 Netfilter core team
netfilter PSD loaded - (c) astaro AG
urlfilter match register 0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
Initializing the WAN Bridge.
Please set the MAC Address for the WAN Bridge.
Set the Environment variable 'wan_br_mac'.
MAC Address should be in the following format: xx.xx.xx.xx.xx.xx
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k freed
serial console detected.  Disabling virtual terminals.
console=/dev/tts/0
init started:  BusyBox v0.61.pre (2007.04.13-09:37+0000) multi-call binary
Starting pid 9, console /dev/tts/0: '/etc/init.d/rcS'
Algorithmics/MIPS FPU Emulator v1.5
ledcfg: reading Standard Configuration File /etc/led.conf
ledcfg: configured 15 states
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/net/avalanche_us
b/avalanche_usb.o
USB: Entering USB_init_module.
USB Driver built for RNDIS-CDC protocols.
Error getting protocol configuration from bootloader environment.
Defaulting to "RNDIS-CDC" mode.
VID = 0x451
PID = 0x6060
No Serial Number String present.
Manufacturer = Texas Instruments
Product description = Texas Instruments CDC Ethernet/RNDIS Adapter
USB: Entering USB_Init.
USB: Leaving USB_Init.
Default Asymmetric MTU for usb0 1500
USB: Leaving USB_init_module.
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/atm/tiatm.o
registered device TI Avalanche SAR
Ohio250(7200/7100A2) detected
DBG----: autopvc_enable=1(1: autoPVC ok, 2: unK=1 and 54chg, 3: unK=0 Greg's sug
gestion) chInfo.FwdUnkVc set to 1.
DSP binary filesize = 356930 bytes
tn7dsl_init : env var DSL_BIT_TMODE is set
Texas Instruments ATM driver: version:[6.00.01.00]

~~in minihttpd arWaiting for enter to start '/bin/sh' (pid 38, terminal /dev/tts
/0)

Please press Enter to activate this console. $$$$$$$proc_newboot_defparams
UP MOde is adsl
==== In logic main ====
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device


ADSL default config is already here!
tr069_init: HardwareVersion=2.0.1
tr069_init: SerialNumber1= 4E1004000000001000000015EB4E2326
name MappingEntity
0000-00-00T00:00:08 cfgmgr(tr069glue): get parametervalues(ConnectionRequestURL)
: http://192.168.1.1:1050/
0000-00-00T00:00:08 cfgmgr(logic): instantiate_module: no module 'authright' reg
istered
0000-00-00T00:00:08 cfgmgr(logic): endElement: couldn't instantiate the module '
authright'
resolver: configuration tree:
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod0'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod0'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod1'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod1'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod2'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod2'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod3'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod3'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod4'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod4'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod5'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod5'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod6'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod6'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod7'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod7'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod8'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod8'
0000-00-00T00:00:09 cfgmgr(logic): instantiate_module: no module 'reservedmod9'
registered
0000-00-00T00:00:09 cfgmgr(logic): endElement: couldn't instantiate the module '
reservedmod9'
0000-00-00T00:00:14 cfgmgr(sar): oamPingInterval(20)(20)
0000-00-00T00:00:20 cfgmgr(resolver): stat successfull for /etc/resolv.conf.
0000-00-00T00:00:20 cfgmgr(sntp): NTP Polling Timer for DHCP Started succesfully
.
0000-00-00T00:00:20 cfgmgr(sar): DSL Polling Timer Started succesfully.
0000-00-00T00:00:20 cfgmgr(eth0):   &&&eth_start
0000-00-00T00:00:20 cfgmgr(eth0):   &&&eth_start, ifconfig
0000-00-00T00:00:20 cfgmgr(eth1):   &&&eth_start
0000-00-00T00:00:20 cfgmgr(eth2):   &&&eth_start
0000-00-00T00:00:20 cfgmgr(eth3):   &&&eth_start
0000-00-00T00:00:21 cfgmgr(fdb): Firewall NAT service started
0000-00-00T00:00:21 VFS: Mounted root (squashfs filesystem) readonly.
0000-00-00T00:00:21 : Mounted devfs on /dev
0000-00-00T00:00:21 Freeing unused kernel memory: 64k freed
0000-00-00T00:00:21 : Algorithmics/MIPS FPU Emulator v1.5
0000-00-00T00:00:21 USB: Entering USB_init_module.
0000-00-00T00:00:21 : USB Driver built for RNDIS-CDC protocols.
0000-00-00T00:00:21 : Error getting protocol configuration from bootloader envir
onment.
0000-00-00T00:00:21 : Defaulting to "RNDIS-CDC" mode.
0000-00-00T00:00:21 : VID = 0x451
0000-00-00T00:00:21 : PID = 0x6060
0000-00-00T00:00:21 : No Serial Number String present.
0000-00-00T00:00:21 : Manufacturer = Texas Instruments
0000-00-00T00:00:21 : Product description = Texas Instruments CDC Ethernet/RNDIS
Adapter
0000-00-00T00:00:21 USB: Entering USB_Init.
0000-00-00T00:00:21 USB: Leaving USB_Init.
0000-00-00T00:00:21 : Default Asymmetric MTU for usb0 1500
0000-00-00T00:00:21 USB: Leaving USB_init_module.
0000-00-00T00:00:21 : registered device TI Avalanche SAR
0000-00-00T00:00:21 : Ohio250(7200/7100A2) detected
0000-00-00T00:00:21 DBG----: autopvc_enable=1(1: autoPVC ok, 2: unK=1 and 54chg,
3: unK=0 Greg's suggestion) chInfo.FwdUnkVc set to 1.
0000-00-00T00:00:21 : DSP binary filesize = 356930 bytes
0000-00-00T00:00:22 tn7dsl_init : env var DSL_BIT_TMODE is set
0000-00-00T00:00:22 Texas Instruments ATM driver: version:[6.00.01.00]

0000-00-00T00:00:22 cfgmgr(ap): AP Acquiring Lock
0000-00-00T00:00:22 cfgmgr(ap): AP REPORT LOCK ACQUIRED
0000-00-00T00:00:22 cfgmgr(ap): wlan_handle_load_event - Acquired Lock
0000-00-00T00:00:23 cfgmgr(ap): MAC address : 00:15:eb:4e:23:26
Param InternetGatewayDevice.DeviceInfo.SoftwareVersion ===891=====PVALUE =======
                V1.0.3.T14B
0000-00-00T00:00:23 cfgmgr(lanbridge0): Bridge Created: br0
0000-00-00T00:00:24 cfgmgr(lanbridge1): Bridge Created: br1
0000-00-00T00:00:25 cfgmgr(lanbridge2): Bridge Created: br2
0000-00-00T00:00:25 cfgmgr(lanbridge3): Bridge Created: br3
0000-00-00T00:00:26 cfgmgr(lanbridge4): Bridge Created: br4
0000-00-00T00:00:26 cfgmgr(ap): WPA Authenticator Started
0000-00-00T00:00:26 cfgmgr(lanbridge0): Bridge Interface Added: eth0
WPA send hello to wlan drv
0000-00-00T00:00:27 cfgmgr(lanbridge0): Bridge Interface Added: eth1
0000-00-00T00:00:28 cfgmgr(lanbridge0): Bridge Interface Added: eth2
0000-00-00T00:00:29 cfgmgr(lanbridge0): Bridge Interface Added: eth3
0000-00-00T00:00:30 : Default Asymmetric MTU for br0 1500
0000-00-00T00:00:30 : Default Asymmetric MTU for br1 1500
0000-00-00T00:00:30 : Default Asymmetric MTU for br2 1500
0000-00-00T00:00:30 : Default Asymmetric MTU for br3 1500
0000-00-00T00:00:30 : Default Asymmetric MTU for br4 1500
0000-00-00T00:00:30 : Bridge Multicasting for br0 is now Enabled.
0000-00-00T00:00:30 : Bridge Multicasting for br1 is now Enabled.
0000-00-00T00:00:30 : Bridge Multicasting for br2 is now Enabled.
0000-00-00T00:00:30 : Bridge Multicasting for br3 is now Enabled.
0000-00-00T00:00:30 : Bridge Multicasting for br4 is now Enabled.
0000-00-00T00:00:30 cfgmgr(sar): DSL Carrier is down

hehe in pc message startlistenserver

in inetd_start_manufacture lanoip is 192.168.1.1
lano ip is 192.168.1.1

!!!!!set succeed initialize setsockopt IPPROTO_IP  IP_ADD_MEMBERSHIP

in pc_Intialize_manuctureSocket  manufacturefd is 11

in inetd_start_manufacture ret ==1 ,manufacture fd is 11
0000-00-00T00:00:35 : Default Asymmetric MTU for wlan0 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wlan1 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wlan2 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wlan3 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wdsup0 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wdsdw0 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wdsdw1 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wdsdw2 1500
0000-00-00T00:00:35 : Default Asymmetric MTU for wdsdw3 1500
0000-00-00T00:00:36 cfgmgr(ap): EEPROM len 473
0000-00-00T00:00:36 cfgmgr(ap): AP Driver configuration successful
0000-00-00T00:00:40 cfgmgr(ap): AP IS UP
0000-00-00T00:00:40 : Driver get WPA_HELLO MSG
0000-00-00T00:00:40 612: WDRV_MAINSM: WLAN Driver initialized successfully
0000-00-00T00:00:40 :
0000-00-00T00:00:40 612:              SSID=ZTE4E2326, BSSID=00-15-EB-4E-23-26
0000-00-00T00:00:40 612:  AP Power Level = 1
0000-00-00T00:00:40 612:  Regulatory Domain = ETSI
0000-00-00T00:00:40 612:           Channel=6
0000-00-00T00:00:40 cfgmgr(ap): AP Releasing Lock
0000-00-00T00:00:40 cfgmgr(ap): AP Sending IFACE UP
0000-00-00T00:00:43 cfgmgr(lanbridge0): Bridge Interface Added: wlan0
这是我的猫的启动过程

diskfree

108b的两个版本差别很大，密码为root的是contaxnt方案的，这个1.2版的是bcm的。先等等吧，我的1.2版也没搞定。前几天有个帖子说上传配置改密码的，试了半天也不行。

hotqj

1.2版的是BCM6358芯片？？？
那么就可以按照6358芯片的方法去测试啊。。
如果能把猫的内部图片拍出来更好。。如果有JTAG接口的话，那就更方便了。可以用JTAG备份出对应的配置文件数据，就可以直接查出超级用户和密码是多少了。

zyibm

BCM6358确实是这个芯片！V1.2就是这个芯片！可root确实不对