怎么我的DB120-B1这样的?

秋日晨雾 · 发表于 2009-8-16 21:19:59

CFE version 1.0.37-10.3 for BCM96358 (32bit,SP,BE) Build Date: 2008-05-27 16:57:32 2 (tashin@linux-server1) Copyright (C) 2000-2006 Broadcom Corporation. Boot Address 0xbe000000 Parallel flash device id 227a is not supported. *** Board is not initialized properly *** Press: to use current value '-' to go previous parameter '.' to clear the current value 'x' to exit this command 96358VW2 ------- 0 96358VW ------- 1 96358GWVG ------- 2 96358MV2G ------- 3 96358M ------- 4 96358B ------- 5 96358BGWE_OEM1 ------- 6 96359PONG ------- 7 96358SV ------- 8 Board Id (0-8) :

怎么现在连芯片都没认到,现在是不是挂死了!

YES东 · 发表于 2009-8-16 23:52:45

这里就要你选择board id啊！选择0回车会有其他相关信息。

秋日晨雾 · 发表于 2009-8-17 09:06:59

接着就这样的

CFE version 1.0.37-10.3 for BCM96358 (32bit,SP,BE)
Build Date: 2008-05-27 16:57:32 2 (tashin@linux-server1)
Copyright (C) 2000-2006 Broadcom Corporation.

Boot Address 0xbe000000

Parallel flash device id 227a is not supported.

*** Board is not initialized properly ***

Press:  <enter> to use current value
      '-' to go previous parameter
      '.' to clear the current value
      'x' to exit this command
96358VW2       ------- 0
96358VW       ------- 1
96358GWVG       ------- 2
96358MV2G       ------- 3
96358M          ------- 4
96358B          ------- 5
96358BGWE_OEM1 ------- 6
96359PONG       ------- 7
96358SV       ------- 8
Board Id (0-8)                   :  0
Number of MAC Addresses (1-32) :  0  11
Base MAC Address                :  00:00:00:00:00:00  001e40307344
PSI Size (1-64) KBytes          :  24  24
Flash Block Size (1-128) in KBytes:  0  64
Auxillary File System Size Percent:  0
Main Thread Number [0|1]       :  0
Flash layout changed. Need to erase all flash except bootrom
Invalid command: "e"
Available commands:

CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)

Total memory used by CFE:  0x80401000 - 0x80528450 (1209424)
Initialized Data:       0x8041DEB0 - 0x8041FC60 (7600)
BSS Area:                0x8041FC60 - 0x80426450 (26608)
Local Heap:             0x80426450 - 0x80526450 (1048576)
Stack Area:             0x80526450 - 0x80528450 (8192)
Text (code) segment:    0x80401000 - 0x8041DEA8 (118440)
Boot area (physical):    0x00529000 - 0x00569000
Relocation Factor:       I:00000000 - D:00000000

Use default boot line parameters: e=192.168.1.1:ffffff00 h=192.168.1.100 g= r=f f=vmlinux i=bcm963xx_fs_kernel d=1 p=0

** Flash image not found. **

**Exception 32: EPC=8041CDEC, Cause=80407494 (AddrErrWr)
            RA=FFB9BFFF, VAddr=80522151

      0  ($00) = 382E312E    AT ($01) = 66666666
      v0 ($02) = 3D313932    v1 ($03) = 8052217F
      a0 ($04) = 3D20723D    a1 ($05) = 80420000
      a2 ($06) = 00000001    a3 ($07) = 80420000
      t0 ($08) = 00000001    t1 ($09) = 20703D30
      t2 ($10) = 00000000    t3 ($11) = 00000000
      t4 ($12) = 466C6173    t5 ($13) = 61676520
      t6 ($14) = 666F756E    t7 ($15) = 2A0A0A00
      s0 ($16) = 00000000    s1 ($17) = 00000000
      s2 ($18) = 00000000    s3 ($19) = 00000000
      s4 ($20) = 00000000    s5 ($21) = 00000000
      s6 ($22) = 00000000    s7 ($23) = 00000000
      t8 ($24) = 8041FD10    t9 ($25) = 80522248
      k0 ($26) = FFB9BFFF    k1 ($27) = 804395CC
      gp ($28) = 0000012C    sp ($29) = 00000000
      fp ($30) = 75B1BFFF    ra ($31) = FFB9BFFF

**Exception 32: EPC=8040FB4C, Cause=8040F414 (AddrErrWr)
            RA=3D313932, VAddr=20202020

      0  ($00) = 46423942    AT ($01) = 00577229
      v0 ($02) = 80420000    v1 ($03) = 80420000
      a0 ($04) = 80408940    a1 ($05) = 77B927F3
      a2 ($06) = 80408894    a3 ($07) = 80420000
      t0 ($08) = 80420000    t1 ($09) = 804159D0
      t2 ($10) = 39322E31    t3 ($11) = 00000000
      t4 ($12) = 302E3000    t5 ($13) = 3000002A
      t6 ($14) = 804143F8    t7 ($15) = 00000000
      s0 ($16) = 00000000    s1 ($17) = 00001F80
      s2 ($18) = 80521F88    s3 ($19) = 80413B84
      s4 ($20) = 80420000    s5 ($21) = 80420000
      s6 ($22) = FFB9BFFF    s7 ($23) = 804072E4
      t8 ($24) = 00000000    t9 ($25) = 00000000
      k0 ($26) = 00394C56    k1 ($27) = 653D3139
      gp ($28) = 653D3139    sp ($29) = 382E312E
      fp ($30) = 66666666    ra ($31) = 3D313932

**Exception 32: EPC=00000000, Cause=00000000 (Interrupt)
            RA=20202020, VAddr=20202020

      0  ($00) = 44333133    AT ($01) = 00577229
      v0 ($02) = 00000000    v1 ($03) = 00000000
      a0 ($04) = 00000000    a1 ($05) = 00000000
      a2 ($06) = 00000000    a3 ($07) = 00000009
      t0 ($08) = 00000009    t1 ($09) = 80420000
      t2 ($10) = 80404E64    t3 ($11) = 8041FD51
      t4 ($12) = 00000000    t5 ($13) = 38565732
      t6 ($14) = 20202020    t7 ($15) = 2D2D2D2D
      s0 ($16) = 39363335    s1 ($17) = 20202020
      s2 ($18) = 202D2D2D    s3 ($19) = 2031200A
      s4 ($20) = 38475756    s5 ($21) = 20202020
      s6 ($22) = 2D2D2D2D    s7 ($23) = 39363335
      t8 ($24) = 47202020    t9 ($25) = 202D2D2D
      k0 ($26) = 2033200A    k1 ($27) = 384D2020
      gp ($28) = 20202020    sp ($29) = 2D2D2D2D
      fp ($30) = 39363335    ra ($31) = 20202020

**Exception 32: EPC=00000000, Cause=AB2AAAAA (InvOpcode)
            RA=00000000, VAddr=20202020

      0  ($00) = 30323032    AT ($01) = 00707429
      v0 ($02) = 8041E062    v1 ($03) = 00000007
      a0 ($04) = AAAAAAEA    a1 ($05) = AAAAAAAA
      a2 ($06) = 80426C68    a3 ($07) = 804119B0
      t0 ($08) = 00000000    t1 ($09) = 00000000
      t2 ($10) = 80521AC0    t3 ($11) = 8041FCF8
      t4 ($12) = 80411C48    t5 ($13) = 805217A0
      t6 ($14) = 00000000    t7 ($15) = 80426C90
      s0 ($16) = 80426C90    s1 ($17) = 80412848
      s2 ($18) = 47202020    s3 ($19) = 202D2D2D
      s4 ($20) = 80521AB0    s5 ($21) = 80521AB8
      s6 ($22) = 80426CC0    s7 ($23) = 00000000
      t8 ($24) = 00000000    t9 ($25) = 00000000
      k0 ($26) = 00000000    k1 ($27) = 00000000
      gp ($28) = 00000000    sp ($29) = 00000000
      fp ($30) = 00000000    ra ($31) = 00000000

**Exception 32: EPC=00000000, Cause=00000000 (Interrupt)
            RA=AAA2AAAA, VAddr=20202020

      0  ($00) = 30303030    AT ($01) = 00646529
      v0 ($02) = A882AAAA    v1 ($03) = 29AABAA2
      a0 ($04) = 00000014    a1 ($05) = AABAABAA
      a2 ($06) = AAAAAA2A    a3 ($07) = AABA8AAA
      t0 ($08) = 80521848    t1 ($09) = 00000000
      t2 ($10) = 80521AC0    t3 ($11) = 8041FCF8
      t4 ($12) = 80521AC0    t5 ($13) = 80521871

fdppi · 发表于 2009-8-17 09:24:51

最近好象6358猫的问题很多，看这个帖子https://www.chinadsl.net/thread-37008-1-8.html，同样的问题。

秋日晨雾 · 发表于 2009-8-17 09:41:32

嗯,差不多一样的情况,出现死循环了!估计现在也没有什么办法可以搞得定!

sxj1234 · 发表于 2009-8-17 09:45:13

Flash Block Size (1-128) in KBytes: 0 128
Auxillary File System Size Percent: 0 25

黑洞001 · 发表于 2009-8-17 09:52:40

不是还能进cfe么，再刷过。

秋日晨雾 · 发表于 2009-8-17 11:07:59

现在怎么刷?能不能讲解下?

秋日晨雾 · 发表于 2009-8-17 11:08:37

也不能PING通，如果能PING通还有得一搞！

fdppi · 发表于 2009-8-17 12:42:41

用JTAG线重新刷CFE。

账号		自动登录	找回密码
密码			注册