|
发表于 2009-8-15 02:19:05
|
显示全部楼层
在论坛内ryanneo兄弟的指点下
作了一些仔细的检查
更新一下最新状况
首先,开机信息如下:
CFE version 1.0.37-10.3 for BCM96358 (32bit,SP,BE)
Build Date: 2008-05-27 16:57:32 2 ([email=tashin@linux-server1]tashin@linux-server1[/email])
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Parallel flash device id 227a is not supported.
*** Board is not initialized properly ***
Press: <enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
96358VW2 ------- 0
96358VW ------- 1
96358GWVG ------- 2
96358MV2G ------- 3
96358M ------- 4
96358B ------- 5
96358BGWE_OEM1 ------- 6
96359PONG ------- 7
96358SV ------- 8
Board Id (0-8) :
现在根据提示输入相应的设置参数后
SecreCRT信息会不停滚屏
在开始滚屏的第一屏
会显示如下内容:
Flash layout changed. Need to erase all flash except bootrom
Invalid command: "e"
Available commands:
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x80528450 (1209424)
Initialized Data: 0x8041DEB0 - 0x8041FC60 (7600)
BSS Area: 0x8041FC60 - 0x80426450 (26608)
Local Heap: 0x80426450 - 0x80526450 (1048576)
Stack Area: 0x80526450 - 0x80528450 (8192)
Text (code) segment: 0x80401000 - 0x8041DEA8 (118440)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Use default boot line parameters: e=192.168.1.1:ffffff00 h=192.168.1.100 g= r=f f=vmlinux i=bcm963xx_fs_kernel d=1 p=0
** Flash image not found. **
然后报错,并不停滚屏,并且用Ctrl+C根本无法中止:
**Exception 32: EPC=8041CDEC, Cause=80407494 (AddrErrWr)
RA=EFBFD465, VAddr=80522151
请留意上面的信息中有以下字段,看上去很奇怪的样子
Use default boot line parameters: e=192.168.1.1:ffffff00 h=192.168.1.100 g= r=f f=vmlinux i=bcm963xx_fs_kernel d=1 p=0
0 ($00) = 382E312E AT ($01) = 66666666
.......................... |
|