|
|
发表于 2009-8-9 16:05:20
|
显示全部楼层
后面还有如下信息是跟楼主不一样的：
Code Address: 0x80010000, Entry Address: 0x80263018
Decompression OK!
Entry at 0x80263018
Closing network.
Starting program at 0x80263018
Linux version 2.6.8.1 (root@linuxserver) (gcc version 3.4.2) #1 Fri Feb 27 16:53:54 HKT 2009
Parallel flash device id 227a is not supported.
Readjusting rootfs partition to block 0 at offset 1107296256
*** Board is not initialized properly ***
prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 01fa0000 @ 00000000 (usable)
On node 0 totalpages: 8096
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 4000 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 128 (order 7: 1024 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29376k/32384k available (1948k kernel code, 2964k reserved, 427k data, 80k init, 0k highmem)
Calibrating delay loop... 299.00 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Computing partition layout for flash of size[-1] sectors[-1]
Flash not used for Auxillary File System
Partition ROOTFS_KRN [0x00000000, -1] Blks[ 0: -1 .. -2]
SubPartition Image 1 [0x00000000, 0] Blks[ 0: -1 .. -2]
SubPartition Image 2 [0x00000000, 0] Blks[ 0: -1 .. -2]
Blk# BlkOff Blks BlkSize AvailSize MemStart MemLen Partition Name
0 1408 -1 -1 -1 0x00000580 1024 BOOTLOADER
-1 0 0 -1 -1 0x00000000 -1 ROOTFS_KRN
-1 0 0 0 0 0x00000000 0 JFFS_AUXFS
-1 0 0 -1 -1 0x00000000 -1 LOG_SCRPAD
-1 4294942719 0 -1 -1 0xffff9fff 24576 PERSISTMEM
No flash for scratch pad!
No flash for log sector!
Can't analyze prologue code at 801f59f4
SCSI subsystem initialized
usbcore: registered new driver hub
Skipping PCI bus scan due to resource conflict
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v2.0
Failed to read image tag from flash
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbnet
brcmboard: brcm_board_init entry
ERROR - Invalid number of MAC addresses (1309704800) is configured.
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xfffe0100 (irq = 10) is a BCM63XX
ttyS1 at MMIO 0xfffe0120 (irq = 11) is a BCM63XX
Mirror/redirect action on
u32 classifier
input device check on
Actions configured
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Cannot open root device "31:0" or unknown-block(31,0)
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on unknown-block(31,0)
<0>Rebooting in 1 seconds.. |
|
粤公网安备44152102000001号 
发表于 2009-8-27 10:06:55