DB120WG 刷新中 出现提示：Board is not initialized properly

hot_snow

成功了，感谢各位！
我是 e n 重设配置的，board id 应该是 ra100a 的board id

看我的配置：

CFE> e n
Erase nvram? (y/n):y

Resetting board...

hot_snow

CFE> e n
Erase nvram? (y/n):y

Resetting board.. oot Address 0xbe000000

Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT|S29GL128-A, id 0x2201, size 16384KB

*** Board is not initialized properly ***

Press:  <enter> to use current value
        '-' to go previous parameter
        '.' to clear the current value
        'x' to exit this command
96358VW2         ------- 0
96358VW          ------- 1
96358GWVG        ------- 2
96358MV2G        ------- 3
96358M           ------- 4
96358B           ------- 5
96358BGWE_OEM1   ------- 6
96359PONG        ------- 7
96358SV          ------- 8
Board Id (0-8)                    :  0
Number of MAC Addresses (1-32)    :  10  24
Base MAC Address                  :  00:10:18:00:00:00  00:1e:40:31:28:93
PSI Size (1-64) KBytes            :  24  
Flash Block Size (1-128) in KBytes:  128  
Auxillary File System Size Percent:  0  25
Main Thread Number [0|1]          :  0  
Flash layout changed. Need to erase all flash except bootrom