请教华为S-Box7200 IPTV机顶盒问题

跟踪你 · 发表于 2009-6-16 20:39:46

请问这个机顶盒可以更改MAC地址吗？

TTL详细启动讯息：

BCM97403
AB
1s
K1
K2
K3
K4
K5
2
Copy Code...34TUCV

Common Firmware Environment (CFE) version 1020020  for BCM97403A0,
(Little Endia

n Mode)
Build Date: Tue May 13 21:06:07    2008 ([email=chenxu@sunniwel-f3df0f]chenxu@sunniwel-f3df0f[/email])

Copyright (C) 2000-2007 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
CPU speed: 297MHz
Total memory: 128MB
Total flash: 16MB
Total memory used by CFE:  0x87000000 - 0x87041A54 (268884)

Initialized Data:       0x8703AAA0 - 0x8703F6F8 (19544)

BSS Area:                0x8703F6F8 - 0x87041A54

Local Heap:             0x87041AD4 - 0x87141AD4 (1048576)

Stack Area:             0x87141AD4 - 0x87143AD4 (8192)

Text (code) segment:    0x87000000 - 0x8700EAA8 (60072)

Read E2PROM ldrVersion = f9074 ,ret=0

Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM
Init information:  epprom_init_flag = 17858608,Invalid = 0

partition name : root1; valid: 1; offset: 0; size: 4194304

partition name : root2; valid: 1; offset: 4194304; size: 4194304

partition n offset: 8388608; size: 4194304

partition name : cfe; valid: 1; offset: 12582912; size: 1048576

partition name : logo; valid: 1; offset: 14155776; size: 131072

partition name : para1; valid: 1; offset: 14286848; size: 131072

partition name : para2; valid: 1; offset: 14417920; size: 131072

partition name : font; valid: 1; offset: 14548992; size: 1048576

partition name : setting; valid: 1; offset: 13631488; size: 524288

partition name : playlist; valid: 1; offset: 15597568; size: 262144

partition name : swfs; valid: 1; offset: 15859712; size: 917504

partition name : root1; size: 4194304

partition name : root2; size: 4194304

partition name : app; size: 4194304
partition name : cfe; size: 1048576
partition name : setting; size: 524288

partition name : logo; size: 131072
partition name : para1; size:
partition name : para2; size: 131072
partition name : font; size: 1048576
partition name : playlist; size: 262144
partition name : swfs; size: 917504
sw_gpio_set hPin=34,val=0 ,res=0
sw_gpio_set hPin=35,val=0 ,res=0
sw_gpio_set hPin=58,val=0 ,res=0
sw_gpio_set 58 for mute control 0
Standard:PAL
GIF LIB ret:0 width=720,height=576
cByte = 0
MAC Address:00:07:63:09:94:73
MAC Address2:01:07:63:09:94:73
AddMemSizeToOption mem=48M
AddMemSizeToOption tmem=128M
Loader:elf Filesys:raw Dev:flash0.root1 File:
Options:root=/dev/mtdblock1  rootf

stype=cramfs rw fes=128
partitions=whole:16384&root1:4096&root2:4096&app:4096&cf

e:1024&setting:512&logo:128&para1:128&para2:128&font:1024&playlist:256&s
wfs:896

mac=c  攕?mem=48M tmem=128M
Loading: sw_gpio_set hPin=58,val=0 ,
sw_gpio_set 58 for mute control 0
0x80001000/2658438 0x8028a086/139142 Entry address is 0x8026e000

total=  bytes
Starting program at 0x8026e000
Done initializing U1
found console=  0
HI WORLD!!!
gathering mode: 0x00000264 at 0x0xb000040c

split mode: 0x00000001 at 0xb0000410
board_init_once: regval=40a16502, ddr_strap=3, 4 chips, pci_size=2

Detected 256 MB on board
cfeBootParms ===> root=/dev/mtdblock1  rootfstype=cramfs rw fes=128
partitions=w

hole:16384&root1:4096&root2:4096&app:4096&cfe:1024&setting:512&logo:12

8&para2:128&font:1024&playlist:256&swfs:896 mac=c    攕?mem=48M
tmem=128M

Number of Nand Chips = 0
Kernel boot options: root=/dev/mtdblock1  rootfstype=cramfs rw fes=128
partition

s=whole:16384&root1:4096&root2:4096&app:4096&cfe:1024&setting:512&logo:1
28&para1

:128&para2:128&font:1024&playlist:256&swfs:896 mac=c 攕?mem=48M
tmem=128M co

nsole=ttyS0,115200
gFlashSize=00000000, query[0]=0051, [1]=0052, [2]=0059

**********BOOTEDFROMFLASH, Base=1e000000

Initial CP0 22 value : 0x00010020
Updated CP0 22 value :
CP0 reg 22 sel 0 to 5: 0xe3800000 0x00000020 0x00000000 0x00000020
0x00000000 0x

00000020
Sundry 0xb0404000, chipId 0x00007403, bcm7403Ax 01

CPU revision is: 00020000
change kenel memory to 58MDetermined physical RAM map:

memory: 10000000 @ 00000000 (usable)

User-defined physical RAM map:
node [00000000, 04000000: RAM]
node [04000000, 0c000000: RSVD]
<4>bootmem_init: map 0 type 1
<4>bootmem_init: curr_pfn 0x000002ad last_pfn 0x0000ffff max_low_pfn
0x00010000

<4>bootmem_init: Done
<7>On node 0 totalpages: 65536
<7>  DMA zone: 65536 pages, LIFO batch:31

<7>  Normal zone: 0 pages, LIFO batch:1

<7>  HighMem zone: 0 pages, LIFO batch:1

Before resource_init
After resource_init
Built 1 zonelists
<5>Kernel command line: root=/dev/mtdblock1  rootfstype=cramfs rw
fes=128 partit

ions=whole:16384&root1:4096&root2:4096&app:4096&cfe:1024&setting:512&log
o:128&pa

ra1:128&para2:128&font:1024&playlist:256&swfs:896 mac=c       攕?
mem=64M tmem

=128M console=ttyS0,115200
before init RAC 0x02a00000    0x00000000

after init RAC 0x02a000
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16
bytes.

Primary data cache 32kB, 2-way, linesize 16 bytes.

MIPS_CACHE_ALIASES = ON
end of ld_mmu_r4xx0
end of local_tlb_init
Wired: 17
Index:  0 pgmask=16Mb va=d0000000 asid=00

                     [pa=d0000000 c=2 d=1 v=1 g=1]

                     [pa=d1000000 c=2 d=1 v=1 g=1]

Index:  1 pgmask=16Mb va=d2000000 asid=00

                     [pa=d2000000 c=2 d=1 v=1 g=1]

                     [pa=d3000000 c=2 d=1 v=1 g=1]

Index:  2 pgmask=16Mb va=d4000000 asid=00

                     [pa=d4000000 c=2 d=1 v=1 g=1]

                     [pa=d5000000 c=2 d=1 v=1 g=1]

Index:  3 pgmask=16Mb va=d6000000 asid=00

                     [pa=d6000000 c=2 d=1 v=1 g=1]

                     [pa=d7000000 c=2 d=1 v=1 g=1]

Index:  4 pgmask=16Mb va=d8000000 asid=00

                     [pa=d8000000 c=2 d=1 v=1 g=1]

                     [pa=d9000000 c=2 d=1 v=1 g=1]

Index:  5 pgmask=16Mb va=da000000 asid=00

                     [pa=da000000 c=2 d=1 v=1 g=1]

                     [pa=db000000 c=2 d=1 v=1 g=1]

Index:  6 pgmask=16Mb va=dc000000 asid=00

                     [pa=dc000000 c=2 d=1 v=1 g=1]

                     [pa=dd000000 c=2 d=1 v=1 g=1]

Index:  7 pgmask=16Mb va=de000000 asid=00

                     [pa=de000000 c=2 d=1 v=1 g=1]

                     [pa=df000000 c=2 d=1 v=1 g=1]

Index:  8 pgmask=16Mb va=e0000000 asid=00

                     [pa=e0000000 c=2 d=1 v=1 g=1]

                     [pa=e1000000 c=2 d=1 v=1 g=1]

Index:  9 pgmask=16Mb va=e2000000 asid=00

                     [pa=e2000000 c=2 d=1 v=1 g=1]

                     [pa=e3000000 c=2 d=1 v=1 g=1]

Index: 10 pgmask=16Mb va=e4000000 asid=00

                     [pa=e4000000 c=2 d=1 v=1 g=1]

                     [pa=e5000000 c=2 d=1 v=1 g=1]

Index: 11 pgmask=16Mb va=e6000000 asid=00

                     [pa=e6000000 c=2 d=1 v=1 g=1]

                     [pa=e7000000 c=2 d=1 v=1 g=1]

Index: 12 pgmask=16Mb va=e8000000 asid=00

                     [pa=e8000000 c=2 d=1 v=1 g=1]

                     [pa=e9000000 c=2 d=1 v=1 g=1]

Index: 13 pgmask=16Mb va=ea000000 asid=00

                     [pa=ea000000 c=2 d=1 v=1 g=1]

                     [pa=eb000000 c=2 d=1 v=1 g=1]

Index: 14 pgmask=16Mb va=ec000000 asid=00

                     [pa=ec000000 c=2 d=1 v=1 g=1]

                     [pa=ed000000 c=2 d=1 v=1 g=1]

Index: 15 pgmask=16Mb va=ee000000 asid=00

                     [pa=ee000000 c=2 d=1 v=1 g=1]

                     [pa=ef000000 c=2 d=1 v=1 g=1]

Index: 16 pgmask=16Mb va=f0000000 asid=00

                     [pa=f0000000 c=2 d=1 v=1 g=1]

                     [pa=f1000000 c=2 d=1 v=1 g=1]

$$$$$$$$$$ 1394 dev id ffffffff
$$$$$$$$$$ mini slot dev id ffffffff
$$$$$$$$$$ external dev id ffffffff
Synthesized TLB refill handler (20 instructions).

Synthesized TLB load handler fastpath (32 instructions).

Synthesized TLB store handler fastpath (32 ins

Synthesized TLB modify handler fastpath (31 instructions).

timer irq 68 end 57
PID hash table entries: 2048 (order: 11, 32768 bytes)

mips_counter_frequency = 148000000 from Calibration, = 148500000 from
header(CPU

_MHz/2)
Using 148.500 MHz high precision timer.

################## brcm_serial_console_init, sercon=802629f0

Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

free_all_bootmem_core: Free allocator bitmap

Memory: 60164k/262144k available (2210k kernel code, 201820k reserved,
269k data

, 112k init, 0k highmem)
Mount-cache hash table entries: 512
get_RSVD_size: Returning Size 0x0c000000

Checking for 'wait' instruction...  available.

NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver hub
Initializing Cryptographic API
Broadcom serial driver version 1.00 (2000-11-09) with no serial options
enabled

Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing
disabled

ttyS0 at MMIO 0x0 (irq = 66) is a 16550A

io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
Broadcom BCM74031 Ethernet Network Device v1.0 Apr 10 2009 19:37:01

: MAC Address: 00:07:63:09:94:73
SUNDRY revision = 74030001, have IP Hdr Opt=1

init_buffers: 104 descriptors initialized

init_buffers: 00000068 descriptors initialized, from flowctl

BCMINTMAC: 100 MB Full-Duplex (auto-neg)

PPP generic driver version 2.4
NET: Registered protocol family 24
BCM97XXX flash device 1 : 0x 2000000 at 0x1e000000

Partion Version:0
partition name: whole; partition offset: 0; partition size: 16777216

partition name: root1; partition offset: 0; partition size: 4194304

partition name: root2; partition offset: 4194304; partition size:
4194304

partition name: app; partition offset: 8388608; partition size: 4194304

partition name: cfe; partition offset: 12582912; partition size: 1048576

partition name: setting; partition offset: 13631488; par

partition name: logo; partition offset: 14155776; partition size: 131072

partition name: para1; partition offset: 14286848; partition size:
131072

partition name: para2; partition offset: 14417920; partition size:
131072

partition name: font; partition offset: 14548992; partition size:
1048576

partition name: playlist; partition offset: 15597568; partition size:
262144

partition name: swfs; partition offset: 15859712; partition size: 917504

Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank

Amd/Fujitsu Extended Query Table at 0x0040

fixup_use_write_buffers
Broadcom 9xxxx mapped flash: CFI does not contain boot bank location.
Assuming t

op.
fixup_use_erase_chip
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.

Creating 12 MTD partitions on "Broadcom 9xxxx mapped flash":

0x00000000-0x01000000 : "whole"
0x00000000-0x00400000 : "root1"
0x00400000-0x00800000 : "root2"
0x00800000-0x00c00000 : "app"
0x00c00000-0x00d00000 : "cfe"
0x00d00000-0x00d80000 : "setting
0x00d80000-0x00da0000 : "logo"
0x00da0000-0x00dc0000 : "para1"
0x00dc0000-0x00de0000 : "para2"
0x00de0000-0x00ee0000 : "font"
0x00ee0000-0x00f20000 : "playlist"
0x00f20000-0x01000000 : "swfs"
usbmon: debugs is not available
ehci_hcd_brcm_init: Initializing 1 EHCI devices

10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm
-0)

drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller

- USB h/w setup mode <N>
- USB power enable set for active LOW mode

- Resetting at b0480310
<-- brcm_ehci
brcm-ehci brcm-ehci.0: BRCM EHCI
brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1

brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300

brcm-ehci brcm-ehci.0: park 0
brcm-ehci brcm-ehci.0: USB 0.0 initialized, EHCI 1.00, driver 10 Dec
2004

hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)

drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller

- Resetting at b0480408
<-- brcm_start_hc
brcm-ohci-0 brcm-ohci-0.0: B
brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 2

brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400

hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)

drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller

- Resetting at b0480508
<-- brcm_start_hc
brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI
brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 3

brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10

hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...

usbcore: registered new driver usb-storage

USB Mass Storage support registered.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes

TCP established hash table entries: 16384 (order: 5, 131072 bytes)

TCP bind hash table entries: 16384 (order: 4, 65536 bytes)

TCP: Hash tables configured (established 16384 bind 16384)

NET: Registered protocol family 1
NET: Registered protocol family 1
VFS: Mounted root (cramfs filesystem) readonly.
K5
2
Copy Code...34TUCV
free_initmem: init_begin=8026e000, init_end=8028a000  for BCM97403A0,
(Little Endia
Freeing unused kernel memory: 112k freed
n Mode)
Build
init started:  BusyBox v1.2.1 (2007.08.03-11:06+0000) multi-call binary

Copyright (C) 2000
Starting pid 16, console /dev/ttyS0: '/etc/init.d/rcS'
Initializing Arena.
Algorithmics/MIPS FPU Emulator v1.5
CPU speed: 297MHz
Mount /proc fsl memory: 128M
Mount /dev/pts
Total fl
start services
T
Linux (none) 2.6.12-5.0-brcmstb #3 Fri Apr 10 19:46:27 CST 2009 7452a0
unknown
Initialized Data:       0x8703AAA0 -
usbcore: registered new driver rt73
insmod /lib/modules/rt73.ko    0x8703F6F8 - 0x87041A
Common Firmware Environment (CFE) version 1020020  for BCM9740
sys releasedEndia
ress
swinit successfully!
OSD_WIDTH:720 OSD_HEIGHT:576  MEM_SIZE:23068672 Tue May 13 21:06:07
2008 ([email=chenxu@sunniwel-f3]chenxu@sunniwel-f3[/email]
Boot version: 1030071
Built at Apr_11_2009__11:49:57right (C) 2000-2007 Broadcom C
[Sysem Register handle]: 0x1008100
Initializing
Init GPIO OK!
[0][boot1]:    offset=0x0,    size=0x400000 speed: 297MHz

Total memory:
[0][boot2]:    offset=0x400000,       size=0x400000
Total memory used by CFE:  0x87000000 - 0x870
[0][app]:    offset=0x800000,       size=0x400000
Initialized Data:       0x8703
[0][loader]: offset=0xc00000,       size=0x100000

BSS Area:
[0][setting]: offset=0xd00000,

Total mem:134217728, SDKoffset:671088647858608,Invalid = 0

[1890]
bsettop_init OK!
partiti
[1890]SCREEN: Open SD Display-0t: 0; size: 4194304
[1900]Thread-<tHdmiMonitor : 0 : 103eba0> openedrtition name : root2;
valid: 1; offset: 4194304;
.. OK 4194
[1910]sw_screen_set_standard: [0x2b2f8220] <> STANDARD --> PAL
partition n offset: 8388608; size: 4194304
sw_graphics_init ++
partition na
[1980]sw_graphics_create_osd++82912; size: 1048576
[2030]sw_graphics_create_osd: SD screen dimension -> [720, 576].ame :
logo; valid: 1; offset: 14155776; size: 131072
[2050]PLANE: set des-position org = [0,0,720,576] is Entered.name :
para1; valid: 1; offset: 14286848; size: 131072
[2060]PLANE: set des-position sync=[0,0,720,576] is Entered.tition name
: para2; valid: 1; offset: 14417920; size: 13107
[2060]sw_plane_create: plane=0x10403b8, x=0, y=0, w=720, h=576, o

partition
[2070]PLANE: set des-position org = [360,506,240,40] is Entered.

partition n
[2070]PLANE: set des-position sync=[360,506,240,40] is Entered.partition
name : root2; size: 4194304
[2070]sw_plane_create: plane=0x10407f8, x=360, y=506, w=240, h=40,
order=90
partition name : cfe; size: 1048576
AAAAAtitio
malloc: sett
GIF decode ok288
[sw_parameter_get_int] lValue=2tition name : logo; size: 13107
[value] value=1030071
partit
Sunniwell shell,(c) 2007 sunniwell.
p
==================================
>sw_network_connect static,res=0
ifconfig eth0 up still continue wait 1,res=0

ifconfig eth0 up still continue wait 2
sw_gpio_set
ifconfig eth0 up still continue wait 3
Standard:PAL
ifconfig eth0 up still continue wait 4
cByt
ifconfig eth0 up still continue wait 5:94:73
M
ifconfig eth0 up still continue wait 6
AddMemSizeToOptio
ifconfig eth0 up still continue wait 7MemSizeToOption tmem=128M

ifconfig eth0 up still continue wait 8Dev:flash0.root1 File:
Options:root=/d
ifconfig eth0 up still continu
0x80001000/2658438

跟踪你 · 发表于 2009-6-16 22:17:15

本帖最后由跟踪你于 2009-6-16 14:56 编辑

CEF信息：

CFE> help
Available commands:
init_dram          Read I2C devices.
write_dram       Read I2C devices.
read_dram          Read I2C devices.
write16          Read I2C devices.
write32_by_write16  Read I2C devices.
write32          Read I2C devices.
read16_block_loop Loop read datablock.
read32_read16    Read I2C devices.
read16             Read I2C devices.
read32_block_loop Loop read datablock.
read32_by_read16 Read I2C devices.
read32             Read I2C devices.
gv6111_reset       Read I2C devices.
gv6111_module_init  Read I2C devices.
test_ddram       Read I2C devices.
write_tsblock    Read I2C devices.
set console       Change the active console device
loop             Loop a command
macprog          Program MAC addresses.
macprog2          Program a specific MAC address.
flash             Update a flash memory device
memtest          Test memory.
f                Fill contents of memory.
e                Modify contents of memory.
d                Dump memory.
u                Disassemble instructions.
autoboot          Automatic system bootstrap.
batch             Load a batch file into memory and execute it
go                Start a previously loaded program.
boot             Load an executable file into memory and execute it
load             Load an executable file into memory without executing it
save             Save a region of memory to a remote file via TFTP
download          download flash devices.
ping             Ping a remote IP host.
arp                Display or modify the ARP Table
ifconfig          Configure the Ethernet interface
sleep             Sleep for specified milliseconds.
waitusb          Wait for USB device to be installed.
show heap          Display information about CFE's heap
show memory       Display the system physical memory map.
show devices       Display information about the installed devices.
unsetenv          Delete an environment variable.
printenv          Display the environment variables
setenv             Set an environment variable.
help             Obtain help for CFE commands
For more information about a command, enter 'help command-name'
*** command status = 0

跟踪你 · 发表于 2009-6-17 19:17:19

那位高手懂得CEF改MAC的命令啊？~？

mz798 · 发表于 2009-12-1 21:02:05

期望高手出现! 楼主我也想修该马车

账号		自动登录	找回密码
密码			注册

请教华为S-Box7200 IPTV机顶盒问题

本帖子中包含更多资源

浏览过的版块