|
|
以下是我刷dyscc samba 1.5 的固件CFE界面:
web info: Waiting for connection on socket 0.
web info: Waiting for connection on socket 1.
web info: Upload 5237560 bytes, flash image format.
CFE> .........................................................
.......................................................................
Resetting board...
CFE version 1.0.37-10.3 for BCM96358 (32bit,SP,BE)
Build Date: Thu May 10 22:28:34 CST 2007 (root@localhost.localdomain)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT|S29GL128-A, id 0x2201, size 16384KB
Flash Layout: Boot[0,0xbe000000] Kern[1,0xbe020000]
AuxFS[115,0xbee60000] Misc[126,0xbefc0000] PSI[127,0xbefe0000]
Flash RootFS Partition Length: 14942208
100 MB Full-Duplex (auto-neg)
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x80528200 (1208832)
Initialized Data: 0x8041DA80 - 0x8041FA20 (8096)
BSS Area: 0x8041FA20 - 0x80426200 (26592)
Local Heap: 0x80426200 - 0x80526200 (1048576)
Stack Area: 0x80526200 - 0x80528200 (8192)
Text (code) segment: 0x80401000 - 0x8041DA80 (117376)
Text (code) segment: 0x80401000 - 0x8041DA80 (117376)
Relocation Factor: I:00000000 - D:00000000
Use default boot line parameters: e=192.168.1.1:ffffff00 h=192.168.1.100 g= r=f
f=vmlinux i=bcm963xx_fs_kernel d=1 p=0
** Flash image not found. **
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-8) : 96358VW2
Number of MAC Addresses (1-32) : 11
Base MAC Address : 02:10:18:01:00:01
PSI Size (1-64) KBytes : 24
Flash Block Size (1-128) in KBytes: 64
Auxillary File System Size Percent: 8
Main Thread Number [0|1] : 0
web info: Waiting for connection on socket 0.
CFE>
再不断的刷也是这样的问题.....
但是像刷了下面的4.0 128K固件后.....
web info: Waiting for connection on socket 0.
web info: Waiting for connection on socket 1.
web info: Waiting for connection on socket 0.
web info: Upload 3608926 bytes, Broadcom image format.
CFE>
Flashing CFE: .
Flashing root file system and kernel at 0xbe020000: ............................
.
*** Image flash done *** !
Resetting board...
CFE version 1.0.37-102.9 for BCM96358 (32bit,SP,BE)
Build Date: Thu Jan 15 20:34:16 PST 2009 (root@pclinux-lkaplan)
Copyright (C) 2000-2008 Broadcom Corporation.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
*** Board is not initialized properly ***
*** Upgrading NVRAM (version 4 to version 5) ***
100 MB Full-Duplex (auto-neg)
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Boot Address 0xbe000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : 96358VW2
Number of MAC Addresses (1-32) : 11
Base MAC Address : 02:10:18:01:00:01
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from only image (0xbe020000) ...
Code Address: 0x80010000, Entry Address: 0x801e3000
Decompression OK!
Entry at 0x801e3000
却是成功启动系统的.....
两者之间就是Broadcom image format和flash image format.的差别.....
我怀疑两者是不是一个是128k,一个是256k,我是我的CFE参数设定有误..... |
|
粤公网安备44152102000001号 
发表于 2009-6-7 00:27:53