|
|
猫刷挂了忘备份了
刷了ZTE831CII的1.0.37-10.1能进cfe web界面升级了
不过刷回EchoLife HG510 V300R001B01D071的不带CFE固件在超级终端里不停重启
请备份过的XD传一个
有要HG510 V300R001B01D071的JTAG接线图吗？
超级终端里的死循环
CFE version 1.0.37-10.1 for BCM96338 (32bit,SP,BE)
Build Date: Fri Nov 16 2dcom Corporation.
Boot Address 0xbfc00000
Initializing Arena.
Initializind 0x2249, size 2048KB
Auto-negotiation timed-out
10 MB Half-Duplex (assumed)
sed by CFE: 0x80401000 - 0x80528630 (1209904)
Initialized Data: 0x804041FE60 - 0x80426630 (26576)
Local Heap: 0x80426630 - 0x80526630528630 (8192)
Text (code) segment: 0x80401000 - 0x8041DE8C (118412)
Boot I:00000000 - D:00000000
*** Restore to Factory Default Setting ***
Board IP address : 192.168.1.1:ffffff00
Host IP address :
Run from flash/host (f/h) : f
Default host run file name
Boot delay (0-9 seconds) : 1
Board Id (0-8) : 9s : 00:16:e3:53:4c:59
PSI Size (1-64) KBytes : 24
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 1
web info: Waiting for connection on socket 0.
CFE> c
Press: <enter> to use current value
'-' to go previous parameter
mand
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1 2
*** command status = 0
CFE> b
Press: <enter> to use current value
'-' to go previous parameter
SV ------- 0
96338L-2M-8M ------- 1
96338L-65-2M-8M ------- 2 ----- 5
96338E4 ------- 6
96338E4-20P2 ------- 7
96332CG 2
Number of MAC Addresses (1-32) : 10
Base MAC Address : 00:16:e3:53:4c:59
PSI Size (1-64) KBytes : 24
Resetting board...
CFE version 1.0.37-10.1 for BCM96338 (32bit,SP,BE)
Build Date: Fri Nov 16 23:1rporation.
Boot Address 0xbfc00000
Initializing Arena.
Initializing Devicize 2048KB
Auto-negotiation timed-out
10 MB Half-Duplex (assumed)
)
Total memory used by CFE: 0x80401000 - 0x80528630 (1209904)
Initialized D 0x8041FE60 - 0x80426630 (26576)
Local Heap: 0x80426630 - 0 (8192)
Text (code) segment: 0x80401000 - 0x8041DE8C (118412)
Boot area
*** Restore to Factory Default Setting ***
Board IP address : 192.168.1.1:ffffff00
Host IP address
Run from flash/host (f/h) : f
Default host run file name : elay (0-9 seconds) : 2
Board Id (0-8) : 96338L-65 : 00:16:e3:53:4c:59
PSI Size (1-64) KBytes : 24
*** Press any key to stop auto run (2 seconds) ***
Auto run second count down: 2
web info: Waiting for connection on socket 0.
CFE> b
Press: <enter> to use current value
'-' to go previous parameter
38SV ------- 0
96338L-2M-8M ------- 1
96338L-65-2M-8M ------- ------- 5
96338E4 ------- 6
96338E4-20P2 ------2
Number of MAC Addresses (1-32) : 10 12
Base MAC Address : 00:16:e3:53:4c:59
PSI Size (1-64) KBytes : 24
Resetting board...
CFE version 1.0.37-10.1 for BCM96338 (32bit,SP,BE)
Build Date: Fri Nov 16 2orporation.
Boot Address 0xbfc00000
Initializing Arena.
Initializing Devi048KB
Auto-negotiation timed-out
10 MB Half-Duplex (assumed)
CFE: 0x80401000 - 0x80528630 (1209904)
Initialized Data: 0x8041DE90 -630 (26576)
Local Heap: 0x80426630 - 0x80526630 (1048576)
Stack 0x80401000 - 0x8041DE8C (118412)
Boot area (physical): 0x00529000 - 0
*** Restore to Factory Default Setting ***
Board IP address : 192.168.1.1:ffffff00
Host IP address n from flash/host (f/h) : f
Default host run file name : vmlinlay (0-9 seconds) : 2
Board Id (0-8) : 96338L-65- : 00:16:e3:53:4c:59
PSI Size (1-64) KBytes : 24
*** Press any key to stop auto run (2 seconds) ***
Auto run second count down: 2
web info: Waiting for connection on socket 0.
CFE> b
Press: <enter> to use current value
'-' to go previous parameter
SV ------- 0
96338L-2M-8M ------- 1
96338L-65-2M-8M ------- 2 ------ 5
96338E4 ------- 6
96338E4-20P2 ------- 7
96332CG 2
Number of MAC Addresses (1-32) : 12 11
Base MAC Address : 00:16:e3:53:4c:59
PSI Size (1-64) KBytes : 24
Resetting board...
CFE version 1.0.37-10.1 for BCM96338 (32bit,SP,BE)
Build Date: Fri Nov 16 2Corporation.
Boot Address 0xbfc00000
Initializing Arena.
Initializing Devsize 2048KB
Auto-negotiation timed-out
10 MB Half-Duplex (assumed)
CPU type 0x29010: 240MHz
Total memory: 8388608 bytes (8MB)
Total memory used by CFE: 0x80401000 - 0x80528630 (1209904)
Initialized Data: 0x8041DE90 - 0x8041FE60 (8144)
BSS Area: 0x8041FE60 - 0x80426630 (26576)
Local Heap: 0x80426630 - 0x80526630 (1048576)
Stack Area: 0x80526630 - 0x80528630 (8192)
Text (code) segment: 0x80401000 - 0x8041DE8C (118412)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
*** Restore to Factory Default Setting ***
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 2
Board Id (0-8) : 96338L-65-2M-8M
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:16:e3:53:4c:59
PSI Size (1-64) KBytes : 24
*** Press any key to stop auto run (2 seconds) ***
Auto run second count down: 0
Booting from only image (0xbfc10000) ...
Code Address: 0x80010000, Entry Address: 0x80196018
Decompression OK!
Entry at 0x80196018
Closing network.
Starting program at 0x80196018
Linux version 2.6.8.1 (l43571@audio) (gcc version 3.4.2) #1 Thu Jul 13 16:43:30
CST 2006
Total Flash size: 2048K with 35 sectors
***Board is not initialized****: Using the default PSI size: 32
No Scratch Pad !!!
96338L-65-2M-8M prom init
CPU revision is: 00029010
Determined physical RAM map:
memory: 007a0000 @ 00000000 (usable)
On node 0 totalpages: 1952
DMA zone: 1952 pages, LIFO batch:1
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd
brcm mips: enabling icache and dcache...
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB 2-way, linesize 16 bytes.
PID hash table entries: 32 (order 5: 256 bytes)
Using 120.000 MHz high precision timer.
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 5924k/7808k available (1359k kernel code, 1864k reserved, 197k data, 76k
init, 0k highmem)
Calibrating delay loop... 238.38 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Can't analyze prologue code at 80162408
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=1 sec (nowa
yout= 0)
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
brcmboard: brcm_board_init entry
bcm963xx_serial driver v2.0
blaadd: blaa_detect entry
Broadcom BCMPROCFS v1.0 initialized
BCM63xx_ENET board id not set
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
NET: Registered protocol family 1
NET: Registered protocol family 17
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 76k freed
init started: BusyBox v1.00 (2006.07.13-08:45+0000) multi-call binary
Starting pid 13, console /dev/ttyS0: '/etc/init.d/rcS'
Algorithmics/MIPS FPU Emulator v1.5
Starting pid 17, console /dev/ttyS0: '/bin/sh'
(msh)
Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
adsldd: module license 'Proprietary' taints kernel.
Factory Reset Detected...
Using Fixed Flash Type: Writing To Active Flash...
DB_FlushToFlash...
Write 12338 Bytes To Flash...
Write Return Code 0...
CFE version 1.0.37-10.1 for BCM96338 (32bit,SP,BE)
Build Date: Fri Nov 16 23:17:17 HKT 2007 (root@lijian)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbfc00000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV160B, id 0x2249, size 2048KB
Auto-negotiation timed-out
10 MB Half-Duplex (assumed)
Total memory: 8388608 bytes (8MB)
Total memory used by CFE: 0x80401000 - 0x80528630 (1209904)
Initi
BSS Area: 0x8041FE60 - 0x80426630 (265: 0x8
0526630 - 0x80528630 (8192)
Text (code) segment: 0x80elocation Factor: I:00000000 - D:00000000
*** Restore to Factory Default Setting ***
Board IP address : 192.168.1.1:ffffff00
Host IP address
Run from flash/host (f/h) : f
Default host run file name : lay (0-9 seconds) : 2
Board Id (0-8) : 96338L-65- : 00:16:e3:53:4c:5
9
PSI Size (1-64) KBytes : 24
*** Pres2
web info: Waiting for connection on socket 0.
CFE> fdffs
CFE version 1.0.37-10.1 for BCM96338 (32bit,SP,BE)
Build Date: Fri Nov 16 23:17:17 HKT 2007 (root@lijian)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbfc00000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV160B, id 0x2249, size 2048KB
Auto-negotiation timed-out
10 MB Half-Duplex (assumed)
CPU type 0x29010: 240MHz
Total memory: 8388608 bytes (8MB)
Total memory used by CFE: 0x80401000 - 0x80528630 (1209904)
Initialized Data: 0x8041DE90 - 0x8041FE60 (8144)
BSS Area: 0x8041FE60 - 0x80426630 (26576)
Local Heap: 0x80426630 - 0x80526630 (1048576)
Stack Area: 0x80526630 - 0x80528630 (8192)
Text (code) segment: 0x80401000 - 0x8041DE8C (118412)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
*** Restore to Factory Default Setting ***
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 2
Board Id (0-8) : 96338L-65-2M-8M
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:16:e3:53:4c:59
PSI Size (1-64) KBytes : 24
*** Press any key to stop auto run (2 seconds) ***
Auto run second count down: 0
Booting from only image (0xbfc10000) ...
Code Address: 0x80010000, Entry Address: 0x80196018
Decompression OK!
Entry at 0x80196018
Closing network.
Starting program at 0x80196018
Linux version 2.6.8.1 (l43571@audio) (gcc version 3.4.2) #1 Thu Jul 13 16:43:30
CST 2006
Total Flash size: 2048K with 35 sectors
***Board is not initialized****: Using the default PSI size: 32
No Scratch Pad !!!
96338L-65-2M-8M prom init
CPU revision is: 00029010
Determined physical RAM map:
memory: 007a0000 @ 00000000 (usable)
On node 0 totalpages: 1952
DMA zone: 1952 pages, LIFO batch:1
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd
brcm mips: enabling icache and dcache...
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB 2-way, linesize 16 bytes.
PID hash table entries: 32 (order 5: 256 bytes)
Using 120.000 MHz high precision timer.
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 5924k/7808k available (1359k kernel code, 1864k reserved, 197k data, 76k
init, 0k highmem)
Calibrating delay loop... 238.38 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Can't analyze prologue code at 80162408
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=1 sec (nowa
yout= 0)
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
brcmboard: brcm_board_init entry
bcm963xx_serial driver v2.0
blaadd: blaa_detect entry
Broadcom BCMPROCFS v1.0 initialized
BCM63xx_ENET board id not set
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
NET: Registered protocol family 1
NET: Registered protocol family 17
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 76k freed
init started: BusyBox v1.00 (2006.07.13-08:45+0000) multi-call binary
init started: BusyBox v1.00 (2006.07.13-08:45+0000) multi-call binary
Starting pid 13, console /dev/ttyS0: '/etc/init.d/rcS'
Algorithmics/MIPS FPU Emulator v1.5
Starting pid 17, console /dev/ttyS0: '/bin/sh'
BusyBox v1.00 (2006.07.13-08:45+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
adsldd: module license 'Proprietary' taints kernel.
adsl: adsl_init entry
Flash End Tag Not Matched...
Load CFG_CURRENT_ACT_FILE File Failed With Code 17...
Flush To Active Flash 0...
DB_FlushToFlash...
Write 12338 Bytes To Flash...
Write Return Code 0...
BcmAdsl_Initialize=0xC0030460, g_pFnNotifyCallback=0xC00430A4
AdslCoreHwReset: AdslOemDataAddr = 0xA07F73B0
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
==> Bcm963xx Software Version: EchoLife HG510V300R001B01D071.A2pB018b.d16f <
==
pvc2684d: Interface "nas_0_35" created sucessfully
pvc2684d: Communicating over ATM 0.0.35, encapsulation: LLC
pvc2684d: Interface "nas_8_35" created sucessfully
pvc2684d: Communicating over ATM 0.8.35, encapsulation: LLC
pvc2684d: Interface "nas_0_100" created sucessfully
pvc2684d: Communicating over ATM 0.0.100, encapsulation: LLC
pvc2684d: Interface "nas_0_32" created sucessfully
pvc2684d: Communicating over ATM 0.0.32, encapsulation: LLC
pvc2684d: Interface "nas_8_81" created sucessfully
pvc2684d: Communicating over ATM 0.8.81, encapsulation: LLC
pvc2684d: Interface "nas_8_32" created sucessfully
pvc2684d: Communicating over ATM 0.8.32, encapsulation: LLC
device nas_0_35 is not a slave of br0
device nas_0_35 entered promiscuous mode
br0: port 1(nas_0_35) entering learning state
br0: topology change detected, propagating
br0: port 1(nas_0_35) entering forwarding state
device nas_8_35 is not a slave of br0
device nas_8_35 entered promiscuous mode
br0: port 2(nas_8_35) entering learning state
br0: topology change detected, propagating
br0: port 2(nas_8_35) entering forwarding state
device nas_0_100 is not a slave of br0
device nas_0_100 entered promiscuous mode
br0: port 3(nas_0_100) entering learning state
br0: topology change detected, propagating
br0: port 3(nas_0_100) entering forwarding state
device nas_0_32 is not a slave of br0
device nas_0_32 entered promiscuous mode
br0: port 4(nas_0_32) entering learning state
br0: topology change detected, propagating
br0: port 4(nas_0_32) entering forwarding state
device nas_8_81 is not a slave of br0
device nas_8_81 entered promiscuous mode
br0: port 5(nas_8_81) entering learning state
br0: topology change detected, propagating
br0: port 5(nas_8_81) entering forwarding state
device nas_8_32 is not a slave of br0
device nas_8_32 entered promiscuous mode
br0: port 6(nas_8_32) entering learning state
br0: topology change detected, propagating
br0: port 6(nas_8_32) entering forwarding state
Restore default configuration and Reset the system!!!
invalid interface name eth0
vport <enable|disable|query> enable/disable/port query Switch for VLA
N port mapping |
|
粤公网安备44152102000001号 
发表于 2009-5-21 21:06:01
发表于 2009-5-24 12:32:49