求wr541G+刷dd-wrt的教程

microsun33

学习了！！

ganxf

已全部下载,下周刷到1.5的版本上试试

ganxf

问一下SUNNYSHS及rzd4evr,要怎么刷,附件中的ROM文件刷进去后,启动没反映,但用原路由备份的刷进去就没问题.我已把FLASH换成4M的,刷原厂的时候选2M的格式刷就没问题,按4M的刷没法启动

ganxf

原来是换内存错了,费了半天劲还是换了一个8M的,这次换了一个16M的上去OPENWRT文件终于能启动,在TTL监控中有如下显示:
+flash_hwr_init: Unsupported flash device - id=191
FLASH: driver init failed: Driver does not support device
Sorry, FLASH config exceeds available space in FIS directory
Invalid PHY ID1 for enet0 port0.  Expected 0x0243, read 0x0141
Ethernet eth0: MAC address 12:34:56:78:90:13
IP: 192.168.1.1/255.255.255.0, Gateway: 0.0.0.0
Default server: 0.0.0.0

RedBoot(tm) bootstrap and debug environment [ROMRAM]
production release, version "2.1.3" - built 18:43:19, Sep 20 2007

Platform: ap61 (Atheros WiSOC)
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Copyright (C) 2007, NewMedia-NET GmbH.

Board: DLINK DIR-300
RAM: 0x80000000-0x81000000, [0x80040580-0x80ff1000] available
FLASH: 0x00000000 - 0x00000001, 0 blocks of 0x00000000 bytes each.
DD-WRT>
好象是FLASH检测错误,请高手分析

nysalt

希望有大侠把完整改造过程给整理一下，我也想刷一下。。。

fare

我的v1.7版本的，能不能不硬改刷个micro的dd啊？