|
|
本帖最后由 pctreelb 于 2009-3-26 19:47 编辑
hg522，启动后只有power 和 dsl灯亮[未接电话线]，接网线端口提示未连接，无线没发现信号，以下是启动ttl信号：
v0.06 PLL w ln p08 zi
Solos 461x PP boot v1.5
SDRAM size = 0x2000000
Processor clock speed 264.0MHz
--- Check Tag CRC success,System Type: DUAL.
Start up info: MAIN_S.
ulFsOffset: e0000ulFsLen: 3301376 ulFsOffset: 917504
Finding flashfs partition...done.
PPB: image.a_magic = 0xea000006
PPB: image.a_text = 0x000012a0
PPB: image.a_data = 0x000b6820
PPB: image.a_bss = 0x0016e81c
PPB: image.a_syms = 0x00000000
PPB: image.a_entry = 0x00030020
PPB: image.a_trsize = 0x00000000
PPB: image.a_drsize = 0x00000000
Image 'image' is a Linux kernel
Trying to load initrd...none found
Calling Configure_NVS_FromFile.
Flash size is 0x01000000. sdram size = 0x02000000.
LZMA 4.05
00bX
init started: BusyBox v1.00 (2008.12.02-06:54+0000) multi-call binary
RCS DONE
下面是按住reset启动的ttl信息：
v0.06 PLL w ln p08 zi
Solos 461x PP boot v1.5
SDRAM size = 0x2000000
Processor clock speed 264.0MHz
Reset Key pressed, stopping boot.
@@@@@@@@@@@@@Disable watchdog.
cd
Solos 461x Network boot v1.19 (00000000) (FLASH)
MAC 00:22:33:44:55:66
SDRAM 0x02000000 bytes
Phy reset line on GPIO 4
192.168.1.1
Phy reset line on GPIO 4
(Hold '*' during reset for prompt)
Booting from Webserver
Boot from Ethernet Port
20 seconds timeout. Clear Timer! TCP_PF_CLEAR_TIMER
ERROR on accepv0.06 PLL w ln p08 zi
Solos 461x PP boot v1.5
SDRAM size = 0x2000000
Processor clock speed 264.0MHz
--- Check Tag CRC success,System Type: DUAL.
Start up info: MAIN_S.
ulFsOffset: e0000ulFsLen: 3301376 ulFsOffset: 917504
Finding flashfs partition...done.
PPB: image.a_magic = 0xea000006
PPB: image.a_text = 0x000012a0
PPB: image.a_data = 0x000b6820
PPB: image.a_bss = 0x0016e81c
PPB: image.a_syms = 0x00000000
PPB: image.a_entry = 0x00030020
PPB: image.a_trsize = 0x00000000
PPB: image.a_drsize = 0x00000000
Image 'image' is a Linux kernel
Trying to load initrd...none found
Calling Configure_NVS_FromFile.
Flash size is 0x01000000. sdram size = 0x02000000.
LZMA 4.05
00bX
init started: BusyBox v1.00 (2008.12.02-06:54+0000) multi-call binary
RCS DONE
请问各位有什么办法不？ |
|
粤公网安备44152102000001号 
发表于 2009-3-26 19:15:14