|
楼主 |
发表于 2009-3-25 14:24:53
|
显示全部楼层
Basic POST completed... Success. state
Last reset cause: Hardware reset (Power-on reset)gating
PSPBoot1.4 rev: 1.4.0.4069glue): tr069: Delea
(c) Copyright 2002-2005 Texas Instruments, Inc. All Rights Reserved.
et
Sep 8 12:00:27 cfg
Press ESC for monitor... 1n
(psbl)
Booting...p 8 12:00
Launching kernel decompressor.ble_rules : ppp_name not intac
Starting LZMA Uncompression Algorithm.
Copyright (C) 2003 Texas Instruments Incorporated; Copyright (C) 1999-2003 Igor
Pavlov.
Compressed file is LZMA format.
Kernel decompressor was successful ... launching kernel.
LINUX started...
Config serial console: ttyS
vlynq_polarity = lowp 8 12:00:21 cfgmgr
Success in setting up the VLYNQ.ded: eth1
CPU revision is: 00018448
Doing BRC
Primary instruction cache 16kb, linesize 16 bytes (4 ways) 12:00:21 cfgmgr(lanbridge0): Bridge Interface Added: eth2
Primary data cache 8kb, linesize 16 bytes (4 ways)
Doing BRCTL ...
setfi
Number of TLB entries 16.Sep 8 12:00:21 cfgmgr(la
Linux version 2.4.17_mvl21-malta-mips_fp_le (root@localhost.localdomain) (gcc ve
Doing BRCTL ...
setfilter br0 0
rsion 2.95.3 20010315 (release/MontaVista)) #3 Wed Jan 10 18:32:13 CST 2007
stp br4 off
br0: port 1(eth0) entering forwarding
Determined physical RAM map:
br0: top
memory: 14000000 @ 0000
CPU frequency 211.97 MHzpropagating
Calibrating delay loop... 211.35 BogoMIPS:24 cfgmgr(tr069glue): tr069: Deleayed D
Freeing Adam2 reserved memory [0x14001000,0x0001f000]
Memory: 14260k/16384k available (1606k kernel code, 2124k reserved, 103k data, 6
Sep 8 12:00:27 cfgmgr(pppoe-120): del_iptable_rules : ppp
0k init) intact
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Sep 8 12:01:44 cfgmgr(tr069glue): tr069: Delea
tr069qm_msgSend2TR069FrontEnd: key/val is [GetParamete
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIXrialNumber:none]
Linux NET4.0 for Linux 2.4aring gGroupID :TR069_Info
Based upon Swansea University Computer Society NET3.039
TI Optimizations: Allocating TI-Cached Memory Pool.GetParameterValues:settings/InternetG
Warning: Number of buffers is not configured.Setting defa
atewayDevice.DeviceInfo.
NSP Optimizations: Succesfully allocated TI-Cached Memory Pool.rValues:settings/InternetG
Initializing RT netlink socket
atewayDevice.Devi
DEBUG: Starting ksoftirqd with ALWAYS_SOFTIRQ:0x3 NON ALWAYS SOFTIRQ:0xfffffffc.
Clearing gGroupID :TR069_Inform_Group [tr069qm_msgSend2TR069FrontEnd:1388
DEBUG: Starting ksoftirqd with priority:0 policy:0 nice:19.
tr069qm_msgSend2TR069FrontEnd: key/val is [G
Starting kswapds:settings/Inte
Disabling the Out Of Memory Killer
devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au).1_ASB]
C
devfs: boot_options: 0x1nform_Group [tr069qm_msg
pty: 32 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) wi
Initializing the TI QoS NSP Framework.
DEBUG: Initializing the Network Queue Manager Algorithms./val is [GetParameterValues:settings/InternetG
DEBUG: Initialization of the Translation Unit.
atewayDevice.Layer3Forw
DEBUG: Initializing the LOCAL High Priority Database Module.
Clearing gGroupID :TR069_Inform
DEBUG: Initialization of the LOCAL High Priority Database Module successful..
tr069qm_msgSend2TR069FrontEnd: key/va
Succesfully Initialized the TI QoS NSP Framework.
Error getting CPMAC Configuration
MAC CFG : Tx Interrupts off , threshold : 20
Default Asymmetric MTU for eth0 1500nd2TR069FrontEnd: key/val is [GetPar
Default Asymmetric MTU for eth1 1500
CPMAC: Registered switch port 1 with device eth1ce.ManagementServer.ParameterKey:(null)]
Default Asymmetric MTU for eth2 1500
Clearing gGroupID :TR069_Infor
CPMAC: Registered switch port 2 with device eth2
Default Asymmetric MTU for eth3 1500:
^A^H^H^H
Basic POST c
CPMAC: Registered switch port 3 with device eth3
Last reset cause: Hardware reset (Po
TI CPMAC Linux DDA version 1.9 - CPMAC DDC version 0.3
PSPBoot1.4 rev: 1.4.0.4
PSPBoot1.4 rev:
Try Determine FLASH TYPE
(c) Copyright 200
CHIP Manufacturer's ID=BF Device ID=236D Reserved.
Found SSTV39VF640XB FLASH
Press ESC f
Number of erase regions: 2
(psbl)
Primary Vendor Command Set: 0002 (AMD/Fujitsu Standard)
Last reset cause: Hardware reset (P
No Primary Algorithm Table
Alternative Vendor Command Set: 0000 (None)
(c) Copyright 2002-2005 Texa
No Alternate Algorithm Tables Reserved.
Vcc Minimum: 2.7 V
Vcc Maximum: 3.6 Vss ESC for monitor
No Vpp line
Typical byte/word write timeog...
Amd/Fujitsu Extended Query Table v |
|