现在能输入了，但是猫老是重启回到截图那里，好像看到Address is too big,斑竹大人，现在怎么办？
nitialized Data: 0x8041DB70 - 0x8041F900 (7568)
BSS Area: 0x8041F900 - 0x80426200 (26880)
Local Heap: 0x80426200 - 0x80526200 (1048576)
Stack Area: 0x80526200 - 0x80528200 (8192)
Text (code) segment: 0x80401000 - 0x8041DB64 (117604)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id Name : 96358GW
Psi size in KB : 24
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:1f:a3:b7:64:85
Ethernet PHY Type : External Switch Using Reverse MII
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Code Address: 0x80010000, Entry Address: 0x80257018
Decompression OK!
Entry at 0x80257018
Closing network.
Starting program at 0x80257018
Linux version 2.6.8.1 (root@liangbingtong) (gcc version 3.4.2) #1 Mon Jul 7 20:03:18 CST 2008
Parallel flash device: name AM29LV320MT|S29GL128-A, id 0x2201, size 16384KB
fInfo.flash_rootfs_available_length = 16252928
*** Board is not initialized properly ***
96358GW prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 01fa0000 @ 00000000 (usable)
On node 0 totalpages: 8096
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 4000 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 128 (order 7: 1024 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29428k/32384k available (1902k kernel code, 2912k reserved, 425k data, 76k init, 0k highmem)
Calibrating delay loop... 299.00 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Total Flash size: 16384K with 128 sectors
Computing partition layout for flash of size[16777216] sectors[128]
Flash split 25% into RootFS+Kernel[12058624] : AuxFS[4194304]
Partition ROOTFS_KRN [0xbe020000, 12058624] Blks[ 92: 1 .. 92]
SubPartition Image 1 [0xbe020000, 6029312] Blks[ 46: 1 .. 46]
SubPartition Image 2 [0xbe5e0000, 6029312] Blks[ 46: 47 .. 92]
Blk# BlkOff Blks BlkSize AvailSize MemStart MemLen Partition Name
0 1408 1 131072 131072 0xbe000580 1024 BOOTLOADER
1 0 92 131072 12058624 0xbe020000 12058624 ROOTFS_KRN
93 0 32 131072 4194304 0xbeba0000 4194304 JFFS_AUXFS
125 0 1 131072 131072 0xbefa0000 131072 LOG_SCRPAD
126 106496 1 131072 131072 0xbefda000 24576 TW_PERSISTMEM
127 106496 1 131072 131072 0xbeffa000 24576 PERSISTMEM
Can't analyze prologue code at 801ea334
SCSI subsystem initialized
usbcore: registered new driver hub
Skipping PCI bus scan due to resource conflict
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v2.0
File system address: 0xbe5e0100
Registered device mtd[BCM63XX RootFS] dev[0] Flash[0xbe5e0100,3010560]
Registered device mtd[BCM63XX AuxFS] dev[1] Flash[0xbeba0000,4194304]
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
brcmboard: brcm_board_init entry
WIFI: Button Interrupt 0xffff is not enabled
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xfffe0100 (irq = 10) is a BCM63XX
ttyS1 at MMIO 0xfffe0120 (irq = 11) is a BCM63XX
u32 classifier
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 76k freed
init started: BusyBox v1.00 (2009.01.07-17:21+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
I am in rcS now
BusyBox v1.00 (2009.01.07-17:21+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
atmapi: module license 'Proprietary' taints kernel.
atmapi: Unknown symbol kerSysSetMacAddress
atmapi: Unknown symbol kmalloc
insmod: cannot insert `/lib/modules/2.6.8.1/extra/atmapi.ko': Success (2): Success
adsldd: Unknown symbol BcmAtm_GetInterfaceId
adsldd: Unknown symbol g_pfnAdslSetVcEntryEx
adsldd: Unknown symbol g_pfnAdslSetVcEntry
adsldd: Unknown symbol BcmAtm_SetInterfaceLinkInfo
adsldd: Unknown symbol g_pfnAdslSetAtmLoopbackMode
adsldd: Unknown symbol kmalloc
insmod: cannot insert `/lib/modules/2.6.8.1/extra/adsldd.ko': Success (2): Success
blaa_dd: Unknown symbol BcmAtm_GetInterfaceId
blaa_dd: Unknown symbol BcmAtm_GetInterfaceStatistics
blaa_dd: Unknown symbol BcmAtm_AttachVcc
blaa_dd: Unknown symbol rfc2684InMirrorStatus
blaa_dd: Unknown symbol rfc2684OutMirrorStatus
blaa_dd: Unknown symbol mirrorOutPort
blaa_dd: Unknown symbol BcmAtm_GetInterfaceCfg
blaa_dd: Unknown symbol BcmAtm_GetVccCfg
blaa_dd: Unknown symbol BcmAtm_GetVccAddrs
blaa_dd: Unknown symbol mirrorInPort
blaa_dd: Unknown symbol kmalloc
blaa_dd: Unknown symbol BcmAtm_Detach
blaa_dd: Unknown symbol BcmAtm_SendVccData
blaa_dd: Unknown symbol BcmAtm_SetAal2ChannelIds
insmod: cannot insert `/lib/modules/2.6.8.1/extra/blaa_dd.ko': Success (2): Success
br2684: Unknown symbol BcmAtm_GetInterfaceId
br2684: Unknown symbol BcmAtm_AttachVcc
br2684: Unknown symbol rfc2684InMirrorStatus
br2684: Unknown symbol rfc2684OutMirrorStatus
br2684: Unknown symbol mirrorOutPort
br2684: Unknown symbol BcmAtm_GetVccCfg
br2684: Unknown symbol mirrorInPort
br2684: Unknown symbol kmalloc
br2684: Unknown symbol BcmAtm_Detach
br2684: Unknown symbol BcmAtm_SendVccData
insmod: cannot insert `/lib/modules/2.6.8.1/kernel/net/atm/br2684.ko': Success (2): Success
Broadcom BCMPROCFS v1.0 initialized
bcm_enet: Unknown symbol kmalloc
insmod: cannot insert `/lib/modules/2.6.8.1/extra/bcm_enet.ko': Success (2): Success
wl: Unknown symbol kmalloc
insmod: cannot insert `/lib/modules/2.6.8.1/extra/wl.ko': Success (2): Success
I am in profile now...
mount: Mounting /dev/sda1 on /opt failed: No such device or address
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
Error parsing XML configuration: error fatal_err.
BcmAdsl : open error 6
adslctl: BcmAdsl_Initialize error
BcmAdsl : open error 6
BcmAdsl : open error 6
adslctl->ConnectionHandler: BcmAdsl_ConnectionStart error
BcmAtm_Initialize: open error 6
ATM Operation Failed , 2
atmctl: ATM driver return code, state error
BcmAtm_Initialize: open error 6
BcmAtm_Initialize: open error 6
atmctl: ATM driver return code, state error
BcmAdsl : open error 6
==> Bcm963xx Software Version: 1135_021408-3.10L.02. <==
invalid interface name eth0
power <down|up> epower down/up for Switch
RSA public decrypt : error:0407006A:lib(4):func(112):reason(106)
CGI: License key is invalid
sntp: host not found
Not supported. invalid command 6
Not supported. invalid command 6
Address is too big.
CFE version 1.0.37-6.5 for BCM96358 (32bit,SP,BE)
Build Date: Tue Dec 30 21:34:53 CST 2008 (root@MOD6538)
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
Unknown PHY type
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x80528200 (1208832)
Initialized Data: 0x8041DB70 - 0x8041F900 (7568)
BSS Area: 0x8041F900 - 0x80426200 (26880)
Local Heap: 0x80426200 - 0x80526200 (1048576)
Stack Area: 0x80526200 - 0x80528200 (8192)
Text (code) segment: 0x80401000 - 0x8041DB64 (117604)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
*** Board is not initialized properly ***
Press: <enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
Board Id Name (0-6)
96358SV ------- 0
96358VW ------- 1
96358VW-16 ------- 2
96358GW ------- 3
96358GW-16 ------- 4
96358M ------- 5
96358VW2 ------- 6 : 3 X
Number of MAC Addresses (1-32) : 0 -
Board Id Name (0-6)
96358SV ------- 0
96358VW ------- 1
96358VW-16 ------- 2
96358GW ------- 3
96358GW-16 ------- 4
96358M ------- 5
96358VW2 ------- 6 : X ?
Number of MAC Addresses (1-32) : 0 -
Board Id Name (0-6)
96358SV ------- 0
96358VW ------- 1
96358VW-16 ------- 2
96358GW ------- 3
96358GW-16 ------- 4
96358M ------- 5
96358VW2 ------- 6 : ? 3
Number of MAC Addresses (1-32) : 0 12
Base MAC Address : 001FA3B76485
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
Base Ethernet PHY Number [0|1] : 1 0
Press any key to reset the board:
CFE version 1.0.37-6.5 for BCM96358 (32bit,SP,BE)
Build Date: Tue Dec 30 21:34:53 CST 2008 (root@MOD6538)
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
Unknown PHY type
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x80528200 (1208832)
Initialized Data: 0x8041DB70 - 0x8041F900 (7568)
BSS Area: 0x8041F900 - 0x80426200 (26880)
Local Heap: 0x80426200 - 0x80526200 (1048576)
Stack Area: 0x80526200 - 0x80528200 (8192)
Text (code) segment: 0x80401000 - 0x8041DB64 (117604)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id Name : 96358GW
Psi size in KB : 24
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:1f:a3:b7:64:85
Ethernet PHY Type : Internal
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Code Address: 0x80010000, Entry Address: 0x80257018
Decompression OK!
Entry at 0x80257018
Closing network.
Starting program at 0x80257018
Linux version 2.6.8.1 (root@liangbingtong) (gcc version 3.4.2) #1 Mon Jul 7 20:03:18 CST 2008
Parallel flash device: name AM29LV320MT|S29GL128-A, id 0x2201, size 16384KB
fInfo.flash_rootfs_available_length = 16252928
*** Board is not initialized properly ***
96358GW prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 01fa0000 @ 00000000 (usable)
On node 0 totalpages: 8096
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 4000 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 128 (order 7: 1024 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29428k/32384k available (1902k kernel code, 2912k reserved, 425k data, 76k init, 0k highmem)
Calibrating delay loop... 299.00 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Total Flash size: 16384K with 128 sectors
Computing partition layout for flash of size[16777216] sectors[128]
Flash split 25% into RootFS+Kernel[12058624] : AuxFS[4194304]
Partition ROOTFS_KRN [0xbe020000, 12058624] Blks[ 92: 1 .. 92]
SubPartition Image 1 [0xbe020000, 6029312] Blks[ 46: 1 .. 46]
SubPartition Image 2 [0xbe5e0000, 6029312] Blks[ 46: 47 .. 92]
Blk# BlkOff Blks BlkSize AvailSize MemStart MemLen Partition Name
0 1408 1 131072 131072 0xbe000580 1024 BOOTLOADER
1 0 92 131072 12058624 0xbe020000 12058624 ROOTFS_KRN
93 0 32 131072 4194304 0xbeba0000 4194304 JFFS_AUXFS
125 0 1 131072 131072 0xbefa0000 131072 LOG_SCRPAD
126 106496 1 131072 131072 0xbefda000 24576 TW_PERSISTMEM
127 106496 1 131072 131072 0xbeffa000 24576 PERSISTMEM
Can't analyze prologue code at 801ea334
SCSI subsystem initialized
usbcore: registered new driver hub
Skipping PCI bus scan due to resource conflict
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v2.0
File system address: 0xbe5e0100
Registered device mtd[BCM63XX RootFS] dev[0] Flash[0xbe5e0100,3010560]
Registered device mtd[BCM63XX AuxFS] dev[1] Flash[0xbeba0000,4194304]
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
brcmboard: brcm_board_init entry
WIFI: Button Interrupt 0xffff is not enabled
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xfffe0100 (irq = 10) is a BCM63XX
ttyS1 at MMIO 0xfffe0120 (irq = 11) is a BCM63XX
u32 classifier
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 76k freed
init started: BusyBox v1.00 (2009.01.07-17:21+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
I am in rcS now
BusyBox v1.00 (2009.01.07-17:21+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
atmapi: module license 'Proprietary' taints kernel.
atmapi: Unknown symbol kerSysSetMacAddress
atmapi: Unknown symbol kmalloc
insmod: cannot insert `/lib/modules/2.6.8.1/extra/atmapi.ko': Success (2): Success
adsldd: Unknown symbol BcmAtm_GetInterfaceId
adsldd: Unknown symbol g_pfnAdslSetVcEntryEx
adsldd: Unknown symbol g_pfnAdslSetVcEntry
adsldd: Unknown symbol BcmAtm_SetInterfaceLinkInfo
adsldd: Unknown symbol g_pfnAdslSetAtmLoopbackMode
adsldd: Unknown symbol kmalloc
insmod: cannot insert `/lib/modules/2.6.8.1/extra/adsldd.ko': Success (2): Success
blaa_dd: Unknown symbol BcmAtm_GetInterfaceId
blaa_dd: Unknown symbol BcmAtm_GetInterfaceStatistics
blaa_dd: Unknown symbol BcmAtm_AttachVcc
blaa_dd: Unknown symbol rfc2684InMirrorStatus
blaa_dd: Unknown symbol rfc2684OutMirrorStatus
blaa_dd: Unknown symbol mirrorOutPort
blaa_dd: Unknown symbol BcmAtm_GetInterfaceCfg
blaa_dd: Unknown symbol BcmAtm_GetVccCfg
blaa_dd: Unknown symbol BcmAtm_GetVccAddrs
blaa_dd: Unknown symbol mirrorInPort
blaa_dd: Unknown symbol kmalloc
blaa_dd: Unknown symbol BcmAtm_Detach
blaa_dd: Unknown symbol BcmAtm_SendVccData
blaa_dd: Unknown symbol BcmAtm_SetAal2ChannelIds
insmod: cannot insert `/lib/modules/2.6.8.1/extra/blaa_dd.ko': Success (2): Success
br2684: Unknown symbol BcmAtm_GetInterfaceId
br2684: Unknown symbol BcmAtm_AttachVcc
br2684: Unknown symbol rfc2684InMirrorStatus
br2684: Unknown symbol rfc2684OutMirrorStatus
br2684: Unknown symbol mirrorOutPort
br2684: Unknown symbol BcmAtm_GetVccCfg
br2684: Unknown symbol mirrorInPort
br2684: Unknown symbol kmalloc
br2684: Unknown symbol BcmAtm_Detach
br2684: Unknown symbol BcmAtm_SendVccData
insmod: cannot insert `/lib/modules/2.6.8.1/kernel/net/atm/br2684.ko': Success (2): Success
Broadcom BCMPROCFS v1.0 initialized
bcm_enet: Unknown symbol kmalloc
insmod: cannot insert `/lib/modules/2.6.8.1/extra/bcm_enet.ko': Success (2): Success
wl: Unknown symbol kmalloc
insmod: cannot insert `/lib/modules/2.6.8.1/extra/wl.ko': Success (2): Success
I am in profile now...
mount: Mounting /dev/sda1 on /opt failed: No such device or address
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
Error parsing XML configuration: error fatal_err.
BcmAdsl : open error 6
adslctl: BcmAdsl_Initialize error
BcmAdsl : open error 6
BcmAdsl : open error 6
adslctl->ConnectionHandler: BcmAdsl_ConnectionStart error
BcmAtm_Initialize: open error 6
ATM Operation Failed , 2
atmctl: ATM driver return code, state error
BcmAtm_Initialize: open error 6
BcmAtm_Initialize: open error 6
atmctl: ATM driver return code, state error
BcmAdsl : open error 6
==> Bcm963xx Software Version: 1135_021408-3.10L.02. <==
invalid interface name eth0
power <down|up> epower down/up for Switch
RSA public decrypt : error:0407006A:lib(4):func(112):reason(106)
CGI: License key is invalid
sntp: host not found
Not supported. invalid command 6
Not supported. invalid command 6
Address is too big.
CFE version 1.0.37-6.5 for BCM96358 (32bit,SP,BE)
Build Date: Tue Dec 30 21:34:53 CST 2008 (root@MOD6538)
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
Unknown PHY type
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x80528200 (1208832)
Initialized Data: 0x8041DB70 - 0x8041F900 (7568)
BSS Area: 0x8041F900 - 0x80426200 (26880)
Local Heap: 0x80426200 - 0x80526200 (1048576)
Stack Area: 0x80526200 - 0x80528200 (8192)
Text (code) segment: 0x80401000 - 0x8041DB64 (117604)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
*** Board is not initialized properly ***
Press: <enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
Board Id Name (0-6)
96358SV ------- 0
96358VW ------- 1
96358VW-16 ------- 2
96358GW ------- 3
96358GW-16 ------- 4
96358M ------- 5
96358VW2 ------- 6 : 3 EN
Number of MAC Addresses (1-32) : 0 |
粤公网安备44152102000001号 
发表于 2009-3-8 19:00:17
发表于 2009-3-8 19:46:14
