2650修改为64M内存成功。
原始版固件。
下边是启动信息。
-
- CFE version 1.0.37-8.7 for BCM96358 (32bit,SP,BE)
- Build Date: Tue Dec 18 12:29:06 CST 2007 (odin@BS5)(Revision: 50)
- Copyright (C) 2000-2006 Broadcom Corporation.
- Boot Address 0xbe000000
- Initializing Arena.
- Initializing Devices.
- Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
- CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
- CPU running TP1
- Total memory: 67108864 bytes (64MB)
- Total memory used by CFE: 0x80401000 - 0x805288B0 (1210544)
- Initialized Data: 0x8041DB60 - 0x8041FF30 (9168)
- BSS Area: 0x8041FF30 - 0x804268B0 (27008)
- Local Heap: 0x804268B0 - 0x805268B0 (1048576)
- Stack Area: 0x805268B0 - 0x805288B0 (8192)
- Text (code) segment: 0x80401000 - 0x8041DB5C (117596)
- Boot area (physical): 0x00529000 - 0x00569000
- Relocation Factor: I:00000000 - D:00000000
- Board IP address : 192.168.1.1:ffffff00
- Host IP address : 192.168.1.12
- Gateway IP address :
- Run from flash/host (f/h) : f
- Default host run file name : vmlinux
- Default host flash file name : bcm963xx_fs_kernel
- Boot delay (0-9 seconds) : 1
- Boot image (0=latest, 1=previous) : 1
- Board Id (0-12) : CTNEW_DSL2650
- Number of MAC Addresses (1-32) : 12
- Base MAC Address : 00:1c:f0:c7:14:7e
- PSI Size (1-64) KBytes : 48
- Main Thread Number [0|1] : 1
- Wireless ssid : ChinaNet-KGnF
- Wireless wpakey : pewkqhxs
- Serial number : 001CF0-35200001CF0C7147E
- *** Press any key to stop auto run (1 seconds) ***
- Auto run second count down: 0
- Booting from previous image (0xbe5e0000) ...
- Code Address: 0x80010000, Entry Address: 0x80295018
- Decompression OK!
- Entry at 0x80295018
- Closing network.
- Starting program at 0x80295018
- Linux version 2.6.8.1 (joan@mochow) (gcc version 3.4.2) #1 Wed Aug 27 14:50:39 CST 2008
- prom init
- CPU revision is: 0002a010
- Determined physical RAM map:
- memory: 03fa0000 @ 00000000 (usable)
- On node 0 totalpages: 16288
- DMA zone: 4096 pages, LIFO batch:1
- Normal zone: 12192 pages, LIFO batch:2
- HighMem zone: 0 pages, LIFO batch:1
- Built 1 zonelists
- Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
- brcm mips: enabling icache and dcache...
- Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
- Primary data cache 16kB 2-way, linesize 16 bytes.
- PID hash table entries: 256 (order 8: 2048 bytes)
- Using 150.000 MHz high precision timer.
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Memory: 61612k/65152k available (2042k kernel code, 3472k reserved, 533k data, 80k init, 0k highmem)
- Calibrating delay loop... 299.00 BogoMIPS
- Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
- Checking for 'wait' instruction... unavailable.
- NET: Registered protocol family 16
- Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
- Total Flash size: 16384K with 128 sectors
- File system address: 0xbe5e0100
- Can't analyze prologue code at 8020d1a4
- SCSI subsystem initialized
- usbcore: registered new driver hub
- NTFS driver 2.1.15 [Flags: R/W].
- JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
- Initializing Cryptographic API
- PPP generic driver version 2.4.2
- NET: Registered protocol family 24
- Using noop io scheduler
- bcm963xx_mtd driver v1.0
- JFFS2 mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
- Amd/Fujitsu Extended Query Table at 0x0040
- JFFS2 mapped flash: CFI does not contain boot bank location. Assuming top.
- number of CFI chips: 1
- cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
- Creating 1 MTD partitions on "JFFS2 mapped flash":
- 0x00000000-0x00420000 : "JFFS2 filesystem"
- PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
- ehci_hcd 0000:00:0a.0: EHCI Host Controller
- PCI: Setting latency timer of device 0000:00:0a.0 to 64
- ehci_hcd 0000:00:0a.0: irq 18, pci mem c0050300
- ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
- PCI: cache line size of 32 is not supported by device 0000:00:0a.0
- ehci_hcd 0000:00:0a.0: USB f.f enabled, EHCI 1.00, driver 2004-May-10
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
- ohci_hcd: block sizes: ed 64 td 64
- PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
- ohci_hcd 0000:00:09.0: OHCI Host Controller
- PCI: Setting latency timer of device 0000:00:09.0 to 64
- ohci_hcd 0000:00:09.0: irq 13, pci mem c0052400
- ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- usbcore: registered new driver usblp
- drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
- Initializing USB Mass Storage driver...
- usbcore: registered new driver usb-storage
- USB Mass Storage support registered.
- brcmboard: brcm_board_init entry
- InitNvramInfo
- SES: Button Interrupt 0x3 is enabled
- SES: LED GPIO 0x800d is enabled
- Serial: BCM63XX driver $Revision: 3.00 $
- ttyS0 at MMIO 0xfffe0100 (irq = 10) is a BCM63XX
- ttyS1 at MMIO 0xfffe0120 (irq = 11) is a BCM63XX
- u32 classifier
- NET: Registered protocol family 2
- IP: routing cache hash table of 512 buckets, 4Kbytes
- TCP: Hash tables configured (established 4096 bind 8192)
- Initializing IPsec netlink socket
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- NET: Registered protocol family 15
- Ebtables v2.0 registered
- NET: Registered protocol family 8
- NET: Registered protocol family 20
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- VFS: Mounted root (squashfs filesystem) readonly.
- Freeing unused kernel memory: 80k freed
- init started: BusyBox v1.00 (2008.08.27-06:58+0000) multi-call binary
- Algorithmics/MIPS FPU Emulator v1.5
- BusyBox v1.00 (2008.08.27-06:58+0000) Built-in shell (msh)
- Enter 'help' for a list of built-in commands.
- Loading drivers and kernel modules...
- atmapi: module license 'Proprietary' taints kernel.
- adsl: adsl_init entry
- blaadd: blaa_detect entry
- fuse init (API version 7.8)
- fuse distribution version: 2.7.3
- Broadcom BCMPROCFS v1.0 initialized
- Broadcom BCM6358A1 Ethernet Network Device v0.3 Aug 27 2008 14:49:05
- Config Internal PHY Through MDIO
- BCM63xx_ENET: Auto-negotiation timed-out
- BCM63xx_ENET: 10 MB Half-Duplex (assumed)
- eth0: MAC Address: 00:1C:F0:C7:14:7F
- Broadcom BCM6358A1 Ethernet Network Device v0.3 Aug 27 2008 14:49:05
- Config Ethernet Switch Through MDIO Pseudo PHY Interface
- dgasp: kerSysRegisterDyingGaspHandler: eth1 registered
- eth1: MAC Address: 00:1C:F0:C7:14:7E
- dgasp: kerSysRegisterDyingGaspHandler: eth1 registered
- PCI: Setting latency timer of device 0000:00:01.0 to 64
- PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
- wl: srom not detected, using main memory mapped srom info (wombo board)
- wl0: wlc_attach: use mac addr from the system pool by id: 0x776c0000
- wl0: MAC Address: 00:1C:F0:C7:14:80
- wl0: Broadcom BCM4318 802.11 Wireless Controller 4.120.25.0.cpe1.3
- dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
- eth1 Link UP.
- flag->enableoutfl = 0
- profileGetFromFlash ok!
- flag->enableoutfl = 0
- ############## inifilename /var/ftpd.conf.##################
- enter enablePVCQueue function
- leave enablePVCQueue function
- try to load from usb drives
- Not have usb drives
- ############## inifilename /var/ftpd.conf.##################
- ioctl, p_name=resetd
- BcmAdsl_Initialize=0xC00BB3E8, g_pFnNotifyCallback=0xC00D47A4
- AnnexCParam=0x7FFF7EB8 AnnexAParam=0x00000980 adsl2=0x00000000
- pSdramPHY=0xA3FFFFF8, 0xB8001 0xDEADBEEF
- AdslCoreHwReset: AdslOemDataAddr = 0xA3FFD3D4
- AnnexCParam=0x7FFF7EB8 AnnexAParam=0x00000980 adsl2=0x00000000
- dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
- atmapi: DoInitialize
- ATM proc init !!!
- atmapi: BpGetWanDataLedGpio( &usValue ) == BP_SUCCESS
- ip_tables: (C) 2000-2002 Netfilter core team
- ip_conntrack version 2.1 (509 buckets, 0 max) - 392 bytes per conntrack
- ip_conntrack_pptp version 2.1 loaded
- ip_nat_pptp version 2.0 loaded
- ip_ct_h323: init success
- ip_nat_h323: init success
- ip_conntrack_rtsp v0.01 loading
- ip_nat_rtsp v0.01 loading
- ==> Bcm963xx Software Version: 3.10L.01beta.A2pB022g.d20h <==
- device eth0 entered promiscuous mode
- br0: port 1(eth0) entering learning state
- br0: topology change detected, propagating
- br0: port 1(eth0) entering forwarding state
- device eth1 entered promiscuous mode
- br0: port 2(eth1) entering learning state
- br0: topology change detected, propagating
- br0: port 2(eth1) entering forwarding state
- BcmRfc2684_init interface is not up nas_0_8_81!
- pvc2684ctl -a -v 0.8.81 &
- use ether mac 00:1c:f0:c7:14:7e
- pvc2684d: Interface "nas_0_8_81" created sucessfully
- set vlan_id before
- set vlan_id 65535 vlan_priority 65535
- pvc2684d: Communicating over ATM 0.8.81, encapsulation: LLC
- device nas_0_8_81 entered promiscuous mode
- br0: port 3(nas_0_8_81) entering learning state
- br0: topology change detected, propagating
- br0: port 3(nas_0_8_81) entering forwarding state
- BcmRfc2684_init interface is not up nas_0_8_81_1!
- pvc2684ctl -a -v 0.8.81 -x 1 -f &
- pvc2684d: Interface "nas_0_8_81" created sucessfully
- pvc2684d: Communicating over ATM 0.8.81, encapsulation: LLC
- use ether mac 00:1c:f0:c7:14:7e
- device nas_0_8_81_1 entered promiscuous mode
- br0: port 4(nas_0_8_81_1) entering learning state
- br0: topology change detected, propagating
- br0: port 4(nas_0_8_81_1) entering forwarding state
- enter InitialTr69QoS function
- QoSConfig.enable = 1
- ===TEY: DHCP: server_config.max_leases=254
- Cannot open /var/staticdhcp.cfg file!
- class_num = 5
- queue_num = 4
- QoSConfig.enable = 1
- qosentry.appname = None id = 1
- qosentry.appname = None id = 2
- qosentry.appname = None id = 3
- qosentry.appname = None id = 4
- qosentry.appname = TR069 id = 5
- gtwy =
-
- device eth0 left promiscuous mode
- br0: port 1(eth0) entering disabled state
- device eth1 left promiscuous mode
- br0: port 2(eth1) entering disabled state
- device nas_0_8_81 left promiscuous mode
- br0: port 3(nas_0_8_81) entering disabled state
- device eth0 entered promiscuous mode
- br0: port 1(eth0) entering learning state
- br0: topology change detected, propagating
- br0: port 1(eth0) entering forwarding state
- device eth1 entered promiscuous mode
- br0: port 2(eth1) entering learning state
- br0: topology change detected, propagating
- br0: port 2(eth1) entering forwarding state
- device nas_0_8_81 entered promiscuous mode
- br0: port 3(nas_0_8_81) entering learning state
- br0: topology change detected, propagating
- br0: port 3(nas_0_8_81) entering forwarding state
- killall: lld2d: no process killed
- killall: wsccmd: no process killed
- Setting SSID "ChinaNet-KGnF"
- SIOCSIFHWADDR: No such device
- wlctl: wl driver adapter not found
- SIOCSIFHWADDR: No such device
- wlctl: wl driver adapter not found
- SIOCSIFHWADDR: No such device
- wlctl: wl driver adapter not found
- Setting country code using abbreviation: "CN"
- wlctl: Not Found
- wlctl: Not Found
- wlctl: Not Found
- wl0: current channel 1
- ==>clark:getCurrentChannel()..set current channel
- device wl0 entered promiscuous mode
- br0: port 5(wl0) entering learning state
- br0: topology change detected, propagating
- br0: port 5(wl0) entering forwarding state
- binding raw socket (index= 8, fd=6) on br0 to TOPO_ETHERTYPE
- lld2d: listening at address: 00:1c:f0:c7:14:7e
- lld2d: Using syslog
- lld2d: Daemonizing...
- lld2d: listening on interface br0
- WlMngr::startWsc: client-pbc mode
- *********************************************
- Wi-Fi Simple Config Application - Intel Corp.
- Version: Build 1.0.5, November 19 2006
- *********************************************
- Initializing stack... OK
- Now starting stack
- get mac = 00 1C F0 C7 14 80
- dequeue : out of locking
- Sun Dec 14 14:15:11 UTC 2008
- tr69c: start!
- ioctl, p_name=diapd
- *** diap wait system init 1 sec start
- ioctl, p_name=thttpd
- ioctl, p_name=portald
- entering USBWGET_Init!
- entering shm_init!
- Open shm_msg1572
- USBWGET_Init success!
- entering USBWGET_main!
- entering chkUSBmyFile!
- USB_file eroor!
- USBWGET_Init Finish!
- USBWGET_TaskID=815!
- ioctl, p_name=wlanbtn
- ioctl, p_name=ctclogd
- !!!the telnet state is 1BcmDb_InitTelnet:stop telnet service
- BcmDb_InitTelnet:Begain telnet service!
- andy debug open success
- gpio_fasync
- Pasync_queue->magic = 0x4601
- dir = www
- sysSetMonitorFd:0
- start to blink status led
- *** diap wait system init 1 sec end
- Plugin pppoe loaded.
- RP-PPPoE plugin version 3.3 compiled against pppd 2.4.3
- Plugin pppoe called.
- br0: port 1(eth0) entering disabled state
- dequeue : out of locking
- ******* MODE: AP with built-in Registrar and UPnP Proxy *******
- dequeue : out of locking
- WSC: Build-in Regstrar, wait for start command....
-
下边是内存信息：
-
- # cat /proc/meminfo
- MemTotal: 61760 kB
- MemFree: 36168 kB
- Buffers: 2564 kB
- Cached: 13440 kB
- SwapCached: 0 kB
- Active: 6936 kB
- Inactive: 11632 kB
- HighTotal: 0 kB
- HighFree: 0 kB
- LowTotal: 61760 kB
- LowFree: 36168 kB
- SwapTotal: 0 kB
- SwapFree: 0 kB
- Dirty: 0 kB
- Writeback: 0 kB
- Mapped: 5920 kB
- Slab: 3888 kB
- Committed_AS: 11144 kB
- PageTables: 480 kB
- VmallocTotal: 1048560 kB
- VmallocUsed: 2452 kB
- VmallocChunk: 1045856 kB
- # sysinfo
- Number of processes: 43
- 2:15pm up 1 min,
- load average: 1 min:0.46, 5 min:0.18, 15 min:0.06
- total used free shared buffers
- Mem: 61760 25568 36192 0 2564
- Swap: 0 0 0
- Total: 61760 25568 36192
- #
有点很奇怪，我看我的2650总内存数和其它网友的不太一样。
不知道是为什么。
等下就把猫连接到网络上边去测试有没问题。 |
粤公网安备44152102000001号 
发表于 2009-2-1 10:59:34
发表于 2009-2-8 16:10:59