TTL终端看到的Boot引导信息。
CFE version 1.0.37-11.3 for BCM96358 (32bit,SP,BE)
Build Date: 涓? 5鏈?28 22:37:40 CST 2008 (root@fc6.ayecom.com)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x805284A0 (1209504)
Initialized Data: 0x8041D840 - 0x8041FCC0 (9344)
BSS Area: 0x8041FCC0 - 0x804264A0 (26592)
Local Heap: 0x804264A0 - 0x805264A0 (1048576)
Stack Area: 0x805264A0 - 0x805284A0 (8192)
Text (code) segment: 0x80401000 - 0x8041D83C (116796)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 1
Board Id (0-15) : 96358GW
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:74:04:e4:15:8e
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from previous image (0xbe020000) ...
Code Address: 0x80010000, Entry Address: 0x80195018
Decompression OK!
Entry at 0x80195018
Closing network.
Starting program at 0x80195018
Linux version 2.6.8.1 (root@fc6.ayecom.com) (gcc version 3.4.2) #1 Mon Jun 9 18:30:39 CST 2008
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
96358GW prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 01fa0000 @ 00000000 (usable)
On node 0 totalpages: 8096
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 4000 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 128 (order 7: 1024 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30260k/32384k available (1347k kernel code, 2080k reserved, 204k data, 68k init, 0k highmem)
KLOB Pool 1 Initialized: 1048576 bytes <0x80e00000 ... 0x80f00000>
Calibrating delay loop... 299.00 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Total Flash size: 16384K with 128 sectors
File system address: 0xbe800100
Can't analyze prologue code at 8015f6d4
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
brcmboard: brcm_board_init entry
SES: Button Interrupt 0x8025 is enabled
Invalid External Interrupt definition
SES: LED GPIO 0x801a is enabled
Invalid External Interrupt definition
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xfffe0100 (irq = 10) is a BCM63XX
ttyS1 at MMIO 0xfffe0120 (irq = 11) is a BCM63XX
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 68k freed
init started: BusyBox v1.00 (2008.01.17-06:09+0000) multi-call binary
init started: BusyBox v1.00 (2008.01.17-06:09+0000) multi-call binary
Starting pid 31, console /dev/ttyS0: '/usr/etc/rcS'
Algorithmics/MIPS FPU Emulator v1.5
bcm_enet: module license 'Proprietary' taints kernel.
Broadcom BCM6358A1 Ethernet Network Device v0.3 Jan 25 2008 10:54:07
Config Ethernet Switch Through MDIO Pseudo PHY Interface
dgasp: kerSysRegisterDyingGaspHandler: eth0 registered
eth0: MAC Address: 00:74:04:E4:15:8E
/usr/etc/rcS: 12: cannot create /proc/led: Directory nonexistent
/usr/etc/rcS: 13: cannot create /proc/led: Directory nonexistent
losetup: /dev/mtdblock5: No such device or address
mount: Mounting /dev/loop0 on /tmp/fs1 failed: No such device or address
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
Cannot open BootLoader MTD
/bin/cp -f /etc/default /tmp/nvram
ap_name=adsl action=start
/bin/cp /proc/uptime /tmp//var/run/rc.adsl.run
/usr/sbin/adslctl start --up
BcmAdsl : open error 6
/usr/sbin/adslctl: BcmAdsl_Initialize error
/usr/sbin/adslctl configure --mod a
BcmAdsl : open error 6
/usr/sbin/adslctl: BcmAdsl_Configure error
/usr/sbin/atmctl start
BcmAtm_Initialize: open error 6
ATM Operation Failed , 2
/usr/sbin/atmctl: ATM driver return code, state error
device eth0 entered promiscuous mode
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=printk action=start
/bin/cp /proc/uptime /tmp//var/run/rc.printk.run
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=lan action=start
/bin/cp /proc/uptime /tmp//var/run/rc.lan.run
/sbin/ifconfig br0 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=wlan action=create
/bin/cp /proc/uptime /tmp//var/run/rc.wlan.run
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=wlan action=start
/bin/cp /proc/uptime /tmp//var/run/rc.wlan.run
start wifi
insmod: cannot insert `/lib/modules/2.6.8.1/extra/ath_pci.ko': Success (2): Success
modprobe: failed to load module ath_pci
SIOCSIFHWADDR: No such device
/sbin/wlanconfig: ioctl: No such device
SIOCSIFHWADDR: No such device
SIOCSIFTXQLEN: No such device
SIOCSIFTXQLEN: No such device
ath0 no private ioctls.
ath0 no private ioctls.
ath0 no private ioctls.
ath0 no private ioctls.
ath0 no private ioctls.
ath0 no private ioctls.
ath0 no private ioctls.
ath0 no private ioctls.
ath0 no private ioctls.
ath0 no private ioctls.
ath0 no private ioctls.
ath0 no private ioctls.
Error for wireless request "Set Encode" (8B2A) :
SET failed on device ath0 ; No such device.
ath0 no private ioctls.
ath0 no private ioctls.
ath0 no private ioctls.
ath0 no private ioctls.
ath0 no private ioctls.
Error for wireless request "Set Fragmentation Threshold" (8B24) :
SET failed on device ath0 ; No such device.
Error for wireless request "Set RTS Threshold" (8B22) :
SET failed on device ath0 ; No such device.
/etc/apup: 31: cannot create /proc/sys/net/ath0/debug: Directory nonexistent
Error for wireless request "Set ESSID" (8B1A) :
SET failed on device ath0 ; No such device.
ath0 no private ioctls.
ath0 no private ioctls.
SIOCGIFFLAGS: No such device
interface ath0 does not exist!
wlan up!!
start wifi return 0
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=syslogd action=start
/bin/cp /proc/uptime /tmp//var/run/rc.syslogd.run
/usr/bin/killall -SIGUSR2 syslogd
killall: syslogd: no process killed
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=httpd action=start
/bin/cp /proc/uptime /tmp//var/run/rc.httpd.run
/bin/ln -sf /www.eng /tmp/www
/usr/sbin/mini_httpd -d /tmp/www -r "Linksys WAG325N " -c '*.cgi' -t 300 -i /var/run/mini_httpd.pid -S -E /usr/sbin/certSrv.pem &
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=dhcpd action=start
/bin/cp /proc/uptime /tmp//var/run/rc.dhcpd.run
/usr/sbin/udhcpd /etc/udhcpd.conf&
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=ntp action=start
/bin/cp /proc/uptime /tmp//var/run/rc.ntp.run
/usr/sbin/ntp -z GMT+0 2&
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=route action=start
/bin/cp /proc/uptime /tmp//var/run/rc.route.run
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=ripd action=start
/bin/cp /proc/uptime /tmp//var/run/rc.ripd.run
/usr/sbin/iptables -D INPUT -p udp --dport 520 -j ACCEPT
modprobe: module ip_tables not found.
modprobe: failed to load module ip_tables
iptables v1.2.8: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=snmp action=start
/bin/cp /proc/uptime /tmp//var/run/rc.snmp.run
/usr/bin/killall snmp
killall: snmp: no process killed
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=radvd action=start
/bin/cp /proc/uptime /tmp//var/run/rc.radvd.run
/bin/cp /proc/uptime /tmp//var/run/rc.radvd.run
can't find this application
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=dhcp6s action=start
/bin/cp /proc/uptime /tmp//var/run/rc.dhcp6s.run
/bin/cp /proc/uptime /tmp//var/run/rc.dhcp6s.run
can't find this application
/usr/etc/rcS: 96: /usr/sbin/lld2: not found
/usr/etc/rcS: 112: cannot create /proc/sys/net/ipv4/ip_conntrack_max: Directory nonexistent
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=upnp action=start
/bin/cp /proc/uptime /tmp//var/run/rc.upnp.run
/usr/bin/killall -9 upnpd
killall: upnpd: no process killed
route add -net 239.0.0.0 netmask 255.0.0.0 br0
/usr/sbin/upnpd nas0 br0 30 4&
/usr/etc/rcS: 134: cannot create /proc/led: Directory nonexistent
/usr/sbin/upnpd: can't load library 'libupnp.so'
* *
* * * *
* {~._.~} *
* ( Y ) *
* ()~*~() *
* (_)-(_) *
* *
* *
*
ap_name=wscupnp action=start
/bin/cp /proc/uptime /tmp//var/run/rc.wscupnp.run
/bin/cp /proc/uptime /tmp//var/run/rc.wscupnp.run
can't find this application
Please press Enter to activate this console. |
粤公网安备44152102000001号 
发表于 2008-11-29 18:01:59
发表于 2009-5-2 20:11:33