大家帮我看看是什么原因

zxx27

不能完成自动拨号,IE打不开,只换了个用户名和密码,以前是1M的,现在换成2M的就不好使了.

日志:

1/1/1970 0:0:0> Ethernet Device 0 Detected
1/1/1970 0:0:0> ATM: Detected
1/1/1970 0:0:0> ATM: Setting up vcc0, VPI=8, VCI=35
1/1/1970 0:0:0> NAPT is enabled
1/1/1970 0:0:24> ATM Connected
1/1/1970 0:0:24> ATM layer is up, cell delineation achieved
1/1/1970 0:0:24> ADSL connected
1/1/1970 0:0:30> AdslAutoConfig: started.
1/1/1970 0:0:30> ATM Disconnected
1/1/1970 0:0:30> ADSL disconnected
1/1/1970 0:0:34> ADSL detected
1/1/1970 0:0:40> ATM Connected
1/1/1970 0:0:40> ATM layer is up, cell delineation achieved
1/1/1970 0:0:40> ADSL connected
1/1/1970 0:0:48> AdslAutoConfig: failed.
1/1/1970 0:0:48> AdslAutoConfig: completed.
1/1/1970 0:0:49> PPP1 PPPoE Session is established.
1/1/1970 0:0:49> PPP PAP Authentication success
1/1/1970 0:0:50> PPP1: IP Protocol Up
1/1/1970 0:0:50> PPP1: PPP IP address is 122.138.xxx.xx
1/1/1970 0:0:50> PPP1: PPP Gateway IP address is 122.138.xx.1
1/1/1970 0:0:50> PPP1: DNS Primary IP address is 202.xx.xx.xx
1/1/1970 0:0:50> PPP1: DNS Secondary IP address is 202.xx.xx.xx
1/1/1970 0:0:50> NAT/NAPT Session Start: VC# 0, WAN IP is 122.138.xxx.xx
1/1/1970 0:0:50> Initialized NAPT.
1/1/1970 0:0:50> NAPT: many-to-one default session is up.
1/1/1970 0:0:50> PPP1 Session is up.
1/1/1970 0:0:52> PPP1 Session is down.
1/1/1970 0:0:52> NAT/NAPT Session Stop: VC# 0
1/1/1970 0:0:52> NAT/NAPT: default session is down.

[ 本帖最后由 zxx27 于 2008-2-2 00:14 编辑 ]

qq64822476

VPI=8, VCI=35 对不对，与原来检查一下

zxx27

就是这个.当地的,8,35