LBHIDDEN[0]LBHIDDEN=================================================================================
MP5121 Main Menu
Getting Started Advanced Management
1. General Setup 21. Filter Set Configuration
3. Ethernet Setup 22. SNMP Configuration
4. Internet Access Setup 23. System Password
24. System Maintenance
25. IP Routing Policy Setup
Advanced Applications 26. Schedule Setup
11. Remote Node Setup
12. Static Routing Setup
15. SUA Server Setup 99. Exit
Enter Menu Selection Number:
=================================================================================
Menu 1 - General Setup
System Name= Nokia_mp5121
Location= ShenZhen
Contact Person';s Name= Philip
Route IP= Yes
Route IPX= No
Bridge= No
Press ENTER to Confirm or ESC to Cancel:
=================================================================================
DNS可更改为本地的设定，可达最快上网速度。本例子设有10个DHCP地址(最好不要超过30个
因为modem里面的cpu不快，内存不够大，MP5121才４Mb，642r11才８Mb)，从192.168.1.201
开始。
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.201
Size of Client IP Pool= 10
Primary DNS Server= 202.96.134.133
Secondary DNS Server= 205.252.144.228
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies=
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
=================================================================================
注意: VPI VPC的值是关键，可参考原modem里的值，因为原modem里面肯定有一组是对的，
否则是不可以拨号上网的。不行的话就用不同的来试，直到可以为止。
ISP';s Name= sz163.gd对应Menu 11 - Remote Node Setup的1. sz163.gd (ISP, SUA)
Menu 4 - Internet Access Setup
ISP';s Name= sz163.gd
Encapsulation= PPPoE
Multiplexing= LLC-based
VPI #= 0
VCI #= 100
Service Name= Any
My Login= szking@163.gd
My Password= ********
Single User Account= Yes
IP Address Assignment= Dynamic
IP Address= N/A
ENET ENCAP Gateway= N/A
Press ENTER to Confirm or ESC to Cancel:
=================================================================================
注意：此项乃是MP5121自动拨号上网的关键，不懂的照做就可以了。
Menu 11 - Remote Node Setup
1. sz163.gd (ISP, SUA)
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
Enter Node # to Edit:
=================================================================================
Menu 11.1 - Remote Node Profile
Rem Node Name= sz163.gd Route= IP
Active= Yes Bridge= No
Encapsulation= PPPoE Edit PPP Options= No
Multiplexing= LLC-based Rem IP Addr= 0.0.0.0
Incoming: Edit IP/IPX/Bridge= No
Rem Login=
Rem Password= ********
Outgoing: Session Options:
My Login= szking@163.gd Edit Filter Sets= No
My Password= ******** PPPoE Idle Timeout(sec)= 0
Authen= CHAP/PAP PPPoE Service Name= Any
Schedule Sets=
Press ENTER to Confirm or ESC to Cancel:
=================================================================================
重新启动modem后，等待几分钟（不同的地方略有不同），可以看到1-PPPoE Up了。
关键：Node-Lnk 下面只有 1-PPPoE 一组
Menu 24.1 - System Maintenance - Status
Node-Lnk Status TxPkts RxPkts Errors Tx B/s Rx B/s Up Time
1-PPPoE Up 880431 951098 0 0 0 0:36:56
2 N/A 0 0 0 0 0 0:00:00
3 N/A 0 0 0 0 0 0:00:00
4 N/A 0 0 0 0 0 0:00:00
5 N/A 0 0 0 0 0 0:00:00
6 N/A 0 0 0 0 0 0:00:00
7 N/A 0 0 0 0 0 0:00:00
8 N/A 0 0 0 0 0 0:00:00
Ethernet: WAN:
Status: 100M/Full Duplex Tx Pkts: 890217 Line Status: Up
Collisions: 0 Rx Pkts: 816581 Upstream Speed: 512 kbps
CPU Load = 2.42% Downstream Speed: 2528 kbps
Press Command:
COMMANDS: 1-Reset Counters ESC-Exit
=================================================================================
游戏Game Over
=================================================================================
粤公网安备44152102000001号 
发表于 2004-3-19 23:22:34
发表于 2010-11-13 17:09:42