[watermark]现在越来越多的设备使用BCM63*5芯片，其操作系统busybox是一种典型的linux，本人特地从网上搜集了相关的命令给大家参考(某些版本的ROM可能不全能用的)
addgroup
addgroup [-g GID] group_name [user_name]
Adds a group to the system
Options:
-g GID specify gid
-------------------------------
adduser
adduser [OPTIONS] user_name
Adds a user to the system
Options:
-h DIR Assign home directory DIR
-g GECOS Assign gecos field GECOS
-s SHELL Assign login shell SHELL
-G Add the user to existing group GROUP
-S create a system user (ignored)
-D Do not assign a password (logins still possible via ssh)
-H Do not create the home directory
-------------------------------
adjtimex
adjtimex [-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]
Reads and optionally sets system timebase parameters. See adjtimex(2).
Options:
-q quiet mode - do not print
-o offset time offset, microseconds
-f frequency frequency adjust, integer kernel units (65536 is 1ppm)
(positive values make the system clock run fast)
-t tick microseconds per tick, usually 10000
-p timeconstant
-------------------------------
ar
ar [-o] [-v] [-p] [-t] [-x] ARCHIVE FILES
Extract or list FILES from an ar archive.
Options:
-o preserve original dates
-p extract to stdout
-t list
-x extract
-v verbosely list files processed
-------------------------------
arping
arping [-fqbDUA] [-c count] [-w timeout] [-I device] [-s sender] target
Ping hosts by ARP requests/replies.
Options:
-f Quit on first ARP reply
-q Be quiet
-b Keep broadcasting, don';t go unicast
-D Duplicated address detection mode
-U Unsolicited ARP mode, update your neighbours
-A ARP answer mode, update your neighbours
-c count Stop after sending count ARP request packets
-w timeout Time to wait for ARP reply, in seconds
-I device Outgoing interface name, default is eth0
-s sender Set specific sender IP address
target Target IP address of ARP request
-------------------------------
ash
ash [FILE]... or: ash -c command [args]...
The ash shell (command interpreter)
-------------------------------
awk
awk [OPTION]... [program-text] [FILE ...]
Options:
-v var=val assign value ';val'; to variable ';var';
-F sep use ';sep'; as field separator
-f progname read program source from file ';progname';
-------------------------------
basename
basename FILE [SUFFIX]
Strips directory path and suffixes from FILE. If specified, also removes any trailing
SUFFIX.
Example:
$ basename /usr/local/bin/foo
foo
$ basename /usr/local/bin/
bin
$ basename /foo/bar.txt .txt
bar
-------------------------------
bunzip2
bunzip2 [OPTION]... [FILE]
Uncompress FILE (or standard input if FILE is ';-'; or omitted).
Options:
-c Write output to standard output
-f Force
-------------------------------
bzcat
bzcat FILE
Uncompress to stdout.
-------------------------------
cal
cal [-jy] [[month] year]
Display a calendar.
Options:
-j Use julian dates.
-y Display the entire year.
-------------------------------
cat
cat [-u] [FILE]...
Concatenates FILE(s) and prints them to stdout.
Options:
-u ignored since unbuffered i/o is always usedExample:
$ cat /proc/uptime
110716.72 17.67
-------------------------------
chgrp
chgrp [OPTION]... GROUP FILE...
Change the group membership of each FILE to GROUP.
Options:
-R Changes files and directories recursively.Example:
$ ls -l /tmp/foo
-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo
$ chgrp root /tmp/foo
$ ls -l /tmp/foo
-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo
-------------------------------
chmod
chmod [-R] MODE[,MODE]... FILE...
Each MODE is one or more of the letters ugoa, one of the symbols +-= and one or more of the
letters rwxst.
Options:
-R Changes files and directories recursively.Example:
$ ls -l /tmp/foo
-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo
$ chmod u+x /tmp/foo
$ ls -l /tmp/foo
-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*
$ chmod 444 /tmp/foo
$ ls -l /tmp/foo
-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo
------------------------------
chown
chown [ -Rh ]... OWNER[<.|:>[GROUP]] FILE...
Change the owner and/or group of each FILE to OWNER and/or GROUP.
Options:
-R Changes files and directories recursively.
-h Do not dereference symbolic links.Example:
$ ls -l /tmp/foo
-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo
$ chown root /tmp/foo
$ ls -l /tmp/foo
-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo
$ chown root.root /tmp/foo
ls -l /tmp/foo
-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo
-------------------------------
chroot
chroot NEWROOT [COMMAND...]
Run COMMAND with root directory set to NEWROOT.
Example:
$ ls -l /bin/ls
lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox
# mount /dev/hdc1 /mnt -t minix
# chroot /mnt
# ls -l /bin/ls
-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*
-------------------------------
chvt
chvt N
Changes the foreground virtual terminal to /dev/ttyN
-------------------------------
clear
clear
Clear screen.
-------------------------------
cmp
cmp [-l] [-s] FILE1 [FILE2]
Compare files. Compares FILE1 vs stdin if FILE2 is not specified.
Options:
-l Write the byte numbers (decimal) and values (octal)
for all differing bytes.
-s quiet mode - do not print
-------------------------------
cp
cp [OPTION]... SOURCE DEST
Copies SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.
-a Same as -dpR
-d,-P Preserves links
-p Preserves file attributes if possible
-f force (implied; ignored) - always set
-i interactive, prompt before overwrite
-R,-r Copies directories recursively
------------------------------
cpio
cpio -[dimtuv][F cpiofile]
Extract or list files from a cpio archive Main operation mode:
d make leading directories
i extract
m preserve mtime
t list
v verbose
u unconditional overwrite
F input from file
-------------------------------
crond
crond -d[#] -c <crondir> -f -b
-d [#] -l [#] -S -L logfile -f -b -c dir
-d num debug level
-l num log level (8 - default)
-S log to syslogd (default)
-L file log to file
-f run in fordeground
-b run in background (default)
-c dir working dir
-------------------------------
crontab
crontab [-c dir] {file|-}|[-u|-l|-e|-d user]
file <opts> replace crontab from file
- <opts> replace crontab from stdin
-u user specify user
-l [user] list crontab for user
-e [user] edit crontab for user
-d [user] delete crontab for user
-c dir specify crontab directory
-------------------------------
cut
cut [OPTION]... [FILE]...
Prints selected fields from each input FILE to standard output.
Options:
-b LIST Output only bytes from LIST
-c LIST Output only characters from LIST
-d CHAR Use CHAR instead of tab as the field delimiter
-s Output only the lines containing delimiter
-f N Print only these fields
-n IgnoredExample:
$ echo "Hello world" | cut -f 1 -d '; ';
Hello
$ echo "Hello world" | cut -f 2 -d '; ';
world
-------------------------------
date
date [OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]
Displays the current time in the given FORMAT, or sets the system date.
Options:
-R Outputs RFC-822 compliant date string
-d STRING Displays time described by STRING, not `now';
-I[TIMESPEC] Outputs an ISO-8601 compliant date/time string.
TIMESPEC=`date'; (or missing) for date only,
`hours';, `minutes';, or `seconds'; for date and,
time to the indicated precision.
-s Sets time described by STRING
-r FILE Displays the last modification time of FILE
-u Prints or sets Coordinated Universal TimeExample:
$ date
Wed Apr 12 18:52:41 MDT 2000
-------------------------------
dc
dc expression ...
This is a Tiny RPN calculator that understands the following operations: +, add, -, sub, *,
mul, /, div, %, mod, **, exp, and, or, not, eor. For example: ';dc 2 2 add'; -> 4, and ';dc 8 8
\* 2 2 + /'; -> 16.
Options: p - Prints the value on the top of the stack, without altering the stack. f -
Prints the entire contents of the stack without altering anything. o - Pops the value off
the top of the stack and uses it to set the output radix.
Only 10 and 16 are supported.Example:
$ dc 2 2 + p
4
$ dc 8 8 \* 2 2 + / p
16
$ dc 0 1 and p
0
$ dc 0 1 or p
1
$ echo 72 9 div 8 mul p | dc
64
-------------------------------
dd
dd [if=FILE] [of=FILE] [bs=N] [count=N] [skip=N]
[seek=N] [conv=notrunc|noerror|sync]
Copy a file, converting and formatting according to options
if=FILE read from FILE instead of stdin
of=FILE write to FILE instead of stdout
bs=N read and write N bytes at a time
count=N copy only N input blocks
skip=N skip N input blocks
seek=N skip N output blocks
conv=notrunc don';t truncate output file
conv=noerror continue after read errors
conv=sync pad blocks with zerosNumbers may be suffixed by c (x1), w (x2), b
(x512), kD (x1000), k (x1024), MD (x1000000), M (x1048576), GD (x1000000000) or G
(x1073741824).
Example:
$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4
4+0 records in
4+0 records out
-------------------------------
deallocvt
deallocvt [N]
Deallocate unused virtual terminal /dev/ttyN
-------------------------------
delgroup
delgroup GROUP
Deletes group GROUP from the system
-------------------------------
deluser
deluser USER
Deletes user USER from the system
devfsd
devfsd devfsd [-v][-fg][-np]
Obsolete daemon for managing devfs permissions and old device name symlinks.
Options:
mntpnt The mount point where devfs is mounted. -v Print the protocol
version numbers for devfsd
and the kernel-side protocol version and exits. -fg Run the
daemon in the foreground. -np Exit after parsing the configuration file
and processing synthetic REGISTER events.
Do not poll for events.
-------------------------------
df
df [-hmk] [FILESYSTEM ...]
Print the filesystem space used and space available.
Options:
-h print sizes in human readable format (e.g., 1K 243M 2G )
-m print sizes in megabytes
-k print sizes in kilobytes(default)Example:
$ df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/sda3 8690864 8553540 137324 98% /
/dev/sda1 64216 36364 27852 57% /boot
$ df /dev/sda3
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/sda3 8690864 8553540 137324 98% /
-------------------------------
dirname
dirname FILENAME
Strips non-directory suffix from FILENAME
Example:
$ dirname /tmp/foo
/tmp
$ dirname /tmp/foo/
/tmp
-------------------------------
dmesg
dmesg [-c] [-n LEVEL] [-s SIZE]
Prints or controls the kernel ring buffer
Options:
-c Clears the ring buffer';s contents after printing
-n LEVEL Sets console logging level
-s SIZE Use a buffer of size SIZE
-------------------------------
dos2unix
dos2unix [option] [FILE]
Converts FILE from dos format to unix format. When no option is given, the input is
converted to the opposite output format. When no file is given, uses stdin for input and
stdout for output.
Options:
-u output will be in UNIX format
-d output will be in DOS format
-------------------------------
dpkg
dpkg [-ilCPru] [-F option] package_name
dpkg is a utility to install, remove and manage Debian packages.
Options:
-i Install the package
-l List of installed packages
-C Configure an unpackaged package
-F depends Ignore depency problems
-P Purge all files of a package
-r Remove all but the configuration files for a package
-u Unpack a package, but don';t configure it
-------------------------------
dpkg-deb
dpkg-deb [-cefxX] FILE [argument]
Perform actions on Debian packages (.debs)
Options:
-c List contents of filesystem tree
-e Extract control files to [argument] directory
-f Display control field name starting with [argument]
-x Extract packages filesystem tree to directory
-X Verbose extractExample:
$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp
-------------------------------
du
du [-aHLdclsxhmk] [FILE]...
Summarizes disk space used for each FILE and/or directory. Disk space is printed in units of
1024 bytes.
Options:
-a show sizes of files in addition to directories
-H follow symbolic links that are FILE command line args
-L follow all symbolic links encountered
-d N limit output to directories (and files with -a) of depth < N
-c output a grand total
-l count sizes many times if hard linked
-s display only a total for each argument
-x skip directories on different filesystems
-h print sizes in human readable format (e.g., 1K 243M 2G )
-m print sizes in megabytes
-k print sizes in kilobytes(default)Example:
$ du
16 ./CVS
12 ./kernel-patches/CVS
80 ./kernel-patches
12 ./tests/CVS
36 ./tests
12 ./scripts/CVS
16 ./scripts
12 ./docs/CVS
104 ./docs
2417 .
-------------------------------
dumpkmap
dumpkmap > keymap
Prints out a binary keyboard translation table to standard output.
Example:
$ dumpkmap > keymap
-------------------------------
dumpleases
dumpleases [-r|-a] [-f LEASEFILE]
Displays the DHCP leases granted by udhcpd.
Options:
-f, --file=FILENAME Leases file to load
-r, --remaining Interpret lease times as time remaing
-a, --absolute Interpret lease times as expire time
-------------------------------
echo
echo [-neE] [ARG ...]
Prints the specified ARGs to stdout
Options:
-n suppress trailing newline
-e interpret backslash-escaped characters (i.e., \t=tab)
-E disable interpretation of backslash-escaped charactersExample:
$ echo "Erik is cool"
Erik is cool
$ echo -e "Erik\nis\ncool"
Erik
is
cool
$ echo "Erik\nis\ncool"
Erik\nis\ncool
-------------------------------
env
env [-iu] [-] [name=value]... [command]
Prints the current environment or runs a program after setting up the specified environment.
Options:
-, -i start with an empty environment
-u remove variable from the environment
-------------------------------
expr
expr EXPRESSION
Prints the value of EXPRESSION to standard output.
EXPRESSION may be:
ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2
ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0
ARG1 < ARG2 ARG1 is less than ARG2
ARG1 <= ARG2 ARG1 is less than or equal to ARG2
ARG1 = ARG2 ARG1 is equal to ARG2
ARG1 != ARG2 ARG1 is unequal to ARG2
ARG1 >= ARG2 ARG1 is greater than or equal to ARG2
ARG1 > ARG2 ARG1 is greater than ARG2
ARG1 + ARG2 arithmetic sum of ARG1 and ARG2
ARG1 - ARG2 arithmetic difference of ARG1 and ARG2
ARG1 * ARG2 arithmetic product of ARG1 and ARG2
ARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2
ARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2
STRING : REGEXP anchored pattern match of REGEXP in STRING
match STRING REGEXP same as STRING : REGEXP
substr STRING POS LENGTH substring of STRING, POS counted from 1
index STRING CHARS index in STRING where any CHARS is found,
or 0
length STRING length of STRING
quote TOKEN interpret TOKEN as a string, even if
it is a keyword like `match'; or an
operator like `/';
( EXPRESSION ) value of EXPRESSIONBeware that many operators need to be
escaped or quoted for shells. Comparisons are arithmetic if both ARGs are numbers, else
lexicographical. Pattern matches return the string matched between \( and \) or null; if \(
and \) are not used, they return the number of characters matched or 0.
-------------------------------
false
false
Return an exit code of FALSE (1).
Example:
$ false
$ echo $?
1
-------------------------------
fbset
fbset [options] [mode]
Show and modify frame buffer settings
Example:
$ fbset
mode "1024x768-76"
# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz
geometry 1024 768 1024 768 16
timings 12714 128 32 16 4 128 4
accel false
rgba 5/11,6/5,5/0,0/0
endmode
-------------------------------
fdflush
fdflush DEVICE
Forces floppy disk drive to detect disk change
-------------------------------
fdformat
fdformat [-n] DEVICE
Low-level formats a floppy disk
Options:
-n Don';t verify after format
-------------------------------
fdisk
fdisk [-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK
Change partition table Options:
-l List partition table(s)
-u Give Start and End in sector (instead of cylinder) units
-s PARTITION Give partition size(s) in blocks
-b 2048: (for certain MO disks) use 2048-byte sectors
-C CYLINDERS Set the number of cylinders
-H HEADS Set the number of heads
-S SECTORS Set the number of sectors
-v Give fdisk version
-------------------------------
find
find [PATH...] [EXPRESSION]
Search for files in a directory hierarchy. The default PATH is the current directory;
default EXPRESSION is ';-print';
EXPRESSION may consist of:
-follow Dereference symbolic links.
-name PATTERN File name (leading directories removed) matches PATTERN.
-print Print (default and assumed). -type X Filetype matches
X (where X is one of: f,d,l,b,c,...)
-perm PERMS Permissions match any of (+NNN); all of (-NNN);
or exactly (NNN)
-mtime TIME Modified time is greater than (+N); less than (-N);
or exactly (N) days
-newer FILE Modified time is more recent than FILE';s
-inum N File has inode number NExample:
$ find / -name passwd
/etc/passwd
-------------------------------
fold
fold [-bsw] [FILE]
Wrap input lines in each FILE (standard input by default), writing to standard output.
Options:
-b count bytes rather than columns
-s break at spaces
-w use WIDTH columns instead of 80
-------------------------------
free
free
Displays the amount of free and used system memory
Example:
$ free
total used free shared buffers
Mem: 257628 248724 8904 59644 93124
Swap: 128516 8404 120112
Total: 386144 257128 129016
-------------------------------
freeramdisk
freeramdisk DEVICE
Frees all memory used by the specified ramdisk.
Example:
$ freeramdisk /dev/ram2
-------------------------------
fsck.minix
fsck.minix [-larvsmf] /dev/name
Performs a consistency check for MINIX filesystems.
Options:
-l Lists all filenames
-r Perform interactive repairs
-a Perform automatic repairs
-v verbose
-s Outputs super-block information
-m Activates MINIX-like "mode not cleared" warnings
-f Force file system check.
-------------------------------
ftpget
ftpget [options] remote-host local-file remote-file
Retrieve a remote file via FTP.
Options:
-c, --continue Continue a previous transfer
-v, --verbose Verbose
-u, --username Username to be used
-p, --password Password to be used
-P, --port Port number to be used
-------------------------------
ftpput
ftpput [options] remote-host remote-file local-file
Store a local file on a remote machine via FTP.
Options:
-v, --verbose Verbose
-u, --username Username to be used
-p, --password Password to be used
-P, --port Port number to be used
-------------------------------
getopt
getopt [OPTIONS]...
Parse command options
-a, --alternative Allow long options starting with single -
-l, --longoptions=longopts Long options to be recognized
-n, --name=progname The name under which errors are reported
-o, --options=optstring Short options to be recognized
-q, --quiet Disable error reporting by getopt(3)
-Q, --quiet-output No normal output
-s, --shell=shell Set shell quoting conventions
-T, --test Test for getopt(1) version
-u, --unquoted Do not quote the outputExample:
$ cat getopt.test
#!/bin/sh
GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \
-n ';example.busybox'; -- "$@"`
if [ $? != 0 ] ; then exit 1 ; fi
eval set -- "$GETOPT"
while true ; do
case $1 in
-a|--a-long) echo "Option a" ; shift ;;
-b|--b-long) echo "Option b, argument `$2';" ; shift 2 ;;
-c|--c-long)
case "$2" in
"") echo "Option c, no argument"; shift 2 ;;
*) echo "Option c, argument `$2';" ; shift 2 ;;
esac ;;
--) shift ; break ;;
*) echo "Internal error!" ; exit 1 ;;
esac
done
-------------------------------
getty
getty [OPTIONS]... baud_rate,... line [termtype]
Opens a tty, prompts for a login name, then invokes /bin/login
Options:
-h Enable hardware (RTS/CTS) flow control.
-i Do not display /etc/issue before running login.
-L Local line, so do not do carrier detect.
-m Get baud rate from modem';s CONNECT status message.
-w Wait for a CR or LF before sending /etc/issue.
-n Do not prompt the user for a login name.
-f issue_file Display issue_file instead of /etc/issue.
-l login_app Invoke login_app instead of /bin/login.
-t timeout Terminate after timeout if no username is read.
-I initstring Sets the init string to send before anything else.
-H login_host Log login_host into the utmp file as the hostname.
-------------------------------
grep
grep [-ihHnqvs] PATTERN [FILEs...]
Search for PATTERN in each FILE or standard input.
Options:
-H prefix output lines with filename where match was found
-h suppress the prefixing filename on output
-i ignore case distinctions
-l list names of files that match
-n print line number with output lines
-q be quiet. Returns 0 if result was found, 1 otherwise
-v select non-matching lines
-s suppress file open/read error messagesExample:
$ grep root /etc/passwd
root:x:0:0:root:/root:/bin/bash
$ grep ^[rR]oo. /etc/passwd
root:x:0:0:root:/root:/bin/bash
-------------------------------
gunzip
gunzip [OPTION]... FILE
Uncompress FILE (or standard input if FILE is ';-';).
Options:
-c Write output to standard output
-f Force read when source is a terminal
-t Test compressed file integrityExample:
$ ls -la /tmp/BusyBox*
-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz
$ gunzip /tmp/BusyBox-0.43.tar.gz
$ ls -la /tmp/BusyBox*
-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar
-------------------------------
gzip
gzip [OPTION]... [FILE]...
Compress FILE(s) with maximum compression. When FILE is ';-'; or unspecified, reads standard
input. Implies -c.
Options:
-c Write output to standard output instead of FILE.gz
-d Decompress
-f Force write when destination is a terminalExample:
$ ls -la /tmp/busybox*
-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar
$ gzip /tmp/busybox.tar
$ ls -la /tmp/busybox*
-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz
-------------------------------
halt
halt [-d<delay>]
Halt the system. Options:
-d delay interval for halting.
------------------------------
hdparm
hdparm [options] [device] ..
Options: -a get/set fs readahead
-A set drive read-lookahead flag (0/1)
-b get/set bus state (0 == off, 1 == on, 2 == tristate)
-B set Advanced Power Management setting (1-255)
-c get/set IDE 32-bit IO setting
-C check IDE power mode status
-d get/set using_dma flag
-D enable/disable drive defect-mgmt
-f flush buffer cache for device on exit
-g display drive geometry
-h display terse usage information
-i display drive identification
-I detailed/current information directly from drive
-Istdin similar to -I, but wants /proc/ide/*/hd?/identify as input
-k get/set keep_settings_over_reset flag (0/1)
-K set drive keep_features_over_reset flag (0/1)
-L set drive doorlock (0/1) (removable harddisks only)
-m get/set multiple sector count
-n get/set ignore-write-errors flag (0/1)
-p set PIO mode on IDE interface chipset (0,1,2,3,4,...)
-P set drive prefetch count
-q change next setting quietly
-Q get/set DMA tagged-queuing depth (if supported)
-r get/set readonly flag (DANGEROUS to set)
-R register an IDE interface (DANGEROUS)
-S set standby (spindown) timeout
-t perform device read timings
-T perform cache read timings
-u get/set unmaskirq flag (0/1)
-U un-register an IDE interface (DANGEROUS)
-v defaults; same as -mcudkrag for IDE drives
-V display program version and exit immediately
-w perform device reset (DANGEROUS)
-W set drive write-caching flag (0/1) (DANGEROUS)
-x tristate device for hotswap (0/1) (DANGEROUS)
-X set IDE xfer mode (DANGEROUS)
-y put IDE drive in standby mode
-Y put IDE drive to sleep
-Z disable Seagate auto-powersaving mode
-z re-read partition table
-------------------------------
head
head [OPTION]... [FILE]...
Print first 10 lines of each FILE to standard output. With more than one FILE, precede each
with a header giving the file name. With no FILE, or when FILE is -, read standard input.
Options:
-n NUM Print first NUM lines instead of first 10
-c NUM output the first NUM bytes
-q never output headers giving file names
-v always output headers giving file namesExample:
$ head -n 2 /etc/passwd
root:x:0:0:root:/root:/bin/bash
daemon:x:1:1:daemon:/usr/sbin:/bin/sh
-------------------------------
hexdump
hexdump [-[bcdefnosvx]] [OPTION] FILE
The hexdump utility is a filter which displays the specified files, or the standard input,
if no files are specified, in a user specified format
-b One-byte octal display
-c One-byte character display
-d Two-byte decimal display
-e FORMAT STRING
-f FORMAT FILE
-n LENGTH Interpret only length bytes of input
-o Two-byte octal display
-s OFFSET Skip offset byte
-v display all input data
-x Two-byte hexadecimal display
-------------------------------
hostid
hostid
Print out a unique 32-bit identifier for the machine.
-------------------------------
hostname
hostname [OPTION] {hostname | -F FILE}
Get or set the hostname or DNS domain name. If a hostname is given (or FILE with the -F
parameter), the host name will be set.
Options:
-s Short
-i Addresses for the hostname
-d DNS domain name
-f Fully qualified domain name
-F FILE Use the contents of FILE to specify the hostnameExample:
$ hostname
sage
-------------------------------
httpd
httpd [-c <conf file>] [-p <port>] [-u user] [-r <realm>] [-m pass] [-h home] [-d/-e
<string>]
Listens for incoming http server requests.
Options:
-c FILE Specifies configuration file. (default httpd.conf)
-p PORT Server port (default 80)
-u USER Set uid to USER after listening privileges port
-r REALM Authentication Realm for Basic Authentication
-m PASS Crypt PASS with md5 algorithm
-h HOME Specifies http HOME directory (default ./)
-e STRING Html encode STRING
-d STRING URL decode STRING
-------------------------------
hwclock
hwclock [-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]
Query and set the hardware clock (RTC)
Options:
-r read hardware clock and print result
-s set the system time from the hardware clock
-w set the hardware clock to the current system time
-u the hardware clock is kept in coordinated universal time
-l the hardware clock is kept in local time
------------------------------
id
id [OPTIONS]... [USERNAME]
Print information for USERNAME or the current user
Options:
-c prints only the security context
-g prints only the group ID
-u prints only the user ID
-n print a name instead of a number
-r prints the real user ID instead of the effective IDExample:
$ id
uid=1000(andersen) gid=1000(andersen)
-------------------------------
ifconfig
ifconfig [-a] <interface> [<address>]
configure a network interface
Options: [add <address>[/<prefixlen>]] [del <address>[/<prefixlen>]]
[[-]broadcast [<address>]] [[-]pointopoint [<address>]]
[netmask <address>] [dstaddr <address>]
[outfill <NN>] [keepalive <NN>]
[hw ether <address>] [metric <NN>] [mtu <NN>]
[[-]trailers] [[-]arp] [[-]allmulti]
[multicast] [[-]promisc] [txqueuelen <NN>] [[-]dynamic]
[mem_start <NN>] [io_addr <NN>] [irq <NN>]
[up|down] ...
-------------------------------
ifdown
ifdown <-ahinv> <ifaces...>
ifdown <options> <ifaces...>
Options:
-h this help
-a de/configure all interfaces automatically
-i FILE use FILE for interface definitions
-n print out what would happen, but don';t do it
(note that this option doesn';t disable mappings)
-v print out what would happen before doing it
-m don';t run any mappings
-f force de/configuration
-------------------------------
ifup
ifup <-ahinv> <ifaces...>
ifup <options> <ifaces...>
Options:
-h this help
-a de/configure all interfaces automatically
-i FILE use FILE for interface definitions
-n print out what would happen, but don';t do it
(note that this option doesn';t disable mappings)
-v print out what would happen before doing it
-m don';t run any mappings
-f force de/configuration
-------------------------------
inetd
inetd [-q len] [conf]
Listens for network connections and launches programs
Option:
-q Sets the size of the socket listen queue to
the specified value. Default is 128.
-------------------------------
init
init
Init is the parent of all processes.
This version of init is designed to be run only by the kernel.
BusyBox init doesn';t support multiple runlevels. The runlevels field of the /etc/inittab
file is completely ignored by BusyBox init. If you want runlevels, use sysvinit.
BusyBox init works just fine without an inittab. If no inittab is found, it has the
following default behavior:
::sysinit:/etc/init.d/rcS
::askfirst:/bin/sh
::ctrlaltdel:/sbin/reboot
::shutdown:/sbin/swapoff -a
::shutdown:/bin/umount -a -r
::restart:/sbin/initif it detects that /dev/console is _not_ a serial console, it
will also run:
tty2::askfirst:/bin/sh
tty3::askfirst:/bin/sh
tty4::askfirst:/bin/shIf you choose to use an /etc/inittab file, the inittab entry
format is as follows:
<id>:<runlevels>:<action>:<process> <id>: WARNING: This field
has a non-traditional meaning for BusyBox init!
The id field is used by BusyBox init to specify the controlling tty for
the specified process to run on. The contents of this field are
appended to "/dev/" and used as-is. There is no need for this field to
be unique, although if it isn';t you may have strange results. If this
field is left blank, the controlling tty is set to the console. Also
note that if BusyBox detects that a serial console is in use, then only
entries whose controlling tty is either the serial console or /dev/null
will be run. BusyBox init does nothing with utmp. We don';t need no
stinkin'; utmp. <runlevels>: The runlevels field is
completely ignored. <action>: Valid actions include: sysinit, respawn,
askfirst, wait,
once, restart, ctrlaltdel, and shutdown. The available
actions can be classified into two groups: actions
that are run only once, and actions that are re-run when the specified
process exits. Run only-once actions:
';sysinit'; is the first item run on boot. init waits until all
sysinit actions are completed before continuing. Following the
completion of all sysinit actions, all ';wait'; actions are run.
';wait'; actions, like ';sysinit'; actions, cause init to wait until
the specified task completes. ';once'; actions are asynchronous,
therefore, init does not wait for them to complete. ';restart'; is
the action taken to restart the init process. By default this
should
simply run /sbin/init, but can be a script which runs pivot_root or
it
can do all sorts of other interesting things. The ';ctrlaltdel'; init
actions are run when the system detects that someone on the system
console has pressed the CTRL-ALT-DEL key combination. Typically one
wants to run ';reboot'; at this point to cause the system to reboot.
Finally the ';shutdown'; action specifies the actions to taken when
init is told to reboot. Unmounting filesystems and disabling swap
is a very good here Run repeatedly actions:
';respawn'; actions are run after the ';once'; actions. When a process
started with a ';respawn'; action exits, init automatically restarts
it. Unlike sysvinit, BusyBox init does not stop processes from
respawning out of control. The ';askfirst'; actions acts just like
respawn, except that before running the specified process it
displays the line "Please press Enter to activate this console."
and then waits for the user to press enter before starting the
specified process. Unrecognized actions (like
initdefault) will cause init to emit an
error message, and then go along with its business. All actions are
run in the order they appear in /etc/inittab. <process>:
Specifies the process to be executed and its command line.Example /etc/inittab 文件:
# This is run first except when booting in single-user mode.
#
::sysinit:/etc/init.d/rcS
# /bin/sh invocations on selected ttys
#
# Start an "askfirst" shell on the console (whatever that may be)
::askfirst:-/bin/sh
# Start an "askfirst" shell on /dev/tty2-4
tty2::askfirst:-/bin/sh
tty3::askfirst:-/bin/sh
tty4::askfirst:-/bin/sh
# /sbin/getty invocations for selected ttys
#
tty4::respawn:/sbin/getty 38400 tty4
tty5::respawn:/sbin/getty 38400 tty5
# Example of how to put a getty on a serial line (for a terminal)
#
#::respawn:/sbin/getty -L ttyS0 9600 vt100
#::respawn:/sbin/getty -L ttyS1 9600 vt100
#
# Example how to put a getty on a modem line.
#::respawn:/sbin/getty 57600 ttyS2
# Stuff to do when restarting the init process
::restart:/sbin/init
# Stuff to do before rebooting
::ctrlaltdel:/sbin/reboot
::shutdown:/bin/umount -a -r
::shutdown:/sbin/swapoff -a
-------------------------------
insmod
insmod [OPTION]... MODULE [symbol=value]...
Loads the specified kernel modules into the kernel.
Options:
-f Force module to load into the wrong kernel version.
-k Make module autoclean-able.
-v verbose output
-q quiet output
-L Lock to prevent simultaneous loads of a module
-m Output load map to stdout
-o NAME Set internal module name to NAME
-x do not export externs
-------------------------------
install
install [-cgmops] [sources] <dest|directory>
Copies files and set attributes
Options:
-c copy the file, default
-d create directories
-g set group ownership
-m set permission modes
-o set ownership
-p preserve date
-s strip symbol tables
------------------------------
ip
ip [ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }
ip [ OPTIONS ] OBJECT { COMMAND | help } where OBJECT := { link | addr | route | tunnel }
OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }
-------------------------------
ipaddr
ipaddr { {add|del} IFADDR dev STRING | {show|flush}
[ dev STRING ] [ to PREFIX ] }
ipaddr {add|del} IFADDR dev STRING ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]
[ to PREFIX ] [ label PATTERN ]
IFADDR := PREFIX | ADDR peer PREFIX
[ broadcast ADDR ] [ anycast ADDR ]
[ label STRING ] [ scope SCOPE-ID ]
SCOPE-ID := [ host | link | global | NUMBER ]
-------------------------------
ipcalc
ipcalc [OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]
Calculate IP network settings from a IP address
Options:
-b --broadcast Display calculated broadcast address.
-n --network Display calculated network address.
-m --netmask Display default netmask for IP. X
-p --prefix Display the prefix for IP/NETMASK. -h --hostname
Display first resolved host name.
-s --silent Don';t ever display error messages.
-------------------------------
iplink
iplink
iplink set DEVICE { up | down | arp { on | off } |
dynamic { on | off } |
mtu MTU }
iplink show [ DEVICE ]
-------------------------------
iproute
iproute { list | flush | { add | del | change | append |
replace | monitor } ROUTE }
iproute { list | flush } SELECTOR iproute get ADDRESS [ from ADDRESS iif STRING ]
[ oif STRING ] [ tos TOS ]
iproute { add | del | change | append | replace | monitor } ROUTE
SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]
ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]
-------------------------------
iptunnel
iptunnel { add | change | del | show } [ NAME ]
[ mode { ipip | gre | sit } ]
[ remote ADDR ] [ local ADDR ] [ ttl TTL ]
iptunnel { add | change | del | show } [ NAME ]
[ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]
[ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]
[ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]
-------------------------------
kill
kill [-signal] process-id [process-id ...]
Send a signal (default is SIGTERM) to the specified process(es).
Options:
-l List all signal names and numbers.Example:
$ ps | grep apache
252 root root S [apache]
263 www-data www-data S [apache]
264 www-data www-data S [apache]
265 www-data www-data S [apache]
266 www-data www-data S [apache]
267 www-data www-data S [apache]
$ kill 252
-------------------------------
killall
killall [-q] [-signal] process-name [process-name ...]
Send a signal (default is SIGTERM) to the specified process(es).
Options:
-l List all signal names and numbers.
-q Do not complain if no processes were killed.Example:
$ killall apache
-------------------------------
klogd
klogd [-c n] [-n]
Kernel logger. Options:
-c n Sets the default log level of console messages to n.
-n Run as a foreground process.
------------------------------
lash
lash [FILE]... or: sh -c command [args]...
The BusyBox LAme SHell (command interpreter)
This command does not yet have proper documentation.
Use lash just as you would use any other shell. It properly handles pipes, redirects, job
control, can be used as the shell for scripts, and has a sufficient set of builtins to do
what is needed. It does not (yet) support Bourne Shell syntax. If you need things like ``if
-then-else';';, ``while';';, and such use ash or bash. If you just need a very simple and
extremely small shell, this will do the job.
-------------------------------
last
last
Shows listing of the last users that logged into the system
-------------------------------
length
length STRING
Prints out the length of the specified STRING.
Example:
$ length Hello
5
-------------------------------
ln
ln [OPTION] TARGET... LINK_NAME|DIRECTORY
Create a link named LINK_NAME or DIRECTORY to the specified TARGET
You may use ';--'; to indicate that all following arguments are non-options.
Options:
-s make symbolic links instead of hard links
-f remove existing destination files
-n no dereference symlinks - treat like normal fileExample:
$ ln -s BusyBox /tmp/ls
$ ls -l /tmp/ls
lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*
-------------------------------
loadfont
loadfont < font
Loads a console font from standard input.
Example:
$ loadfont < /etc/i18n/fontname
-------------------------------
loadkmap
loadkmap < keymap
Loads a binary keyboard translation table from standard input.
Example:
$ loadkmap < /etc/i18n/lang-keymap
-------------------------------
logger
logger [OPTION]... [MESSAGE]
Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.
Options:
-s Log to stderr as well as the system log.
-t TAG Log using the specified tag (defaults to user name).
-p PRIORITY Enter the message with the specified priority.
This may be numerical or a ``facility.level';'; pair.Example:
$ logger "hello"
-------------------------------
login
login [OPTION]... [username] [ENV=VAR ...]
Begin a new session on the system
Options:
-f Do not authenticate (user already authenticated)
-h Name of the remote host for this login.
-p Preserve environment.
------------------------------
logname
logname
Print the name of the current user.
Example:
$ logname
root
-------------------------------
logread
logread [OPTION]...
Shows the messages from syslogd (using circular buffer).
Options:
-f output data as the log grows
-------------------------------
losetup
losetup [OPTION]... LOOPDEVICE FILE or: losetup [OPTION]... -d LOOPDEVICE
Associate LOOPDEVICE with FILE.
Options:
-d Disassociate LOOPDEVICE.
-o OFFSET Start OFFSET bytes into FILE.
-------------------------------
ls
ls [-1AacCdeFilnpLRrSsTtuvwxXhkK] [filenames...]
List directory contents
Options:
-1 list files in a single column
-A do not list implied . and ..
-a do not hide entries starting with .
-C list entries by columns
-c with -l: show ctime
-d list directory entries instead of contents
-e list both full date and full time
-F append indicator (one of */=@|) to entries
-i list the i-node for each file
-l use a long listing format
-n list numeric UIDs and GIDs instead of names
-p append indicator (one of /=@|) to entries
-L list entries pointed to by symbolic links
-R list subdirectories recursively
-r sort the listing in reverse order
-S sort the listing by file size
-s list the size of each file, in blocks
-T NUM assume Tabstop every NUM columns
-t with -l: show modification time
-u with -l: show access time
-v sort the listing by version
-w NUM assume the terminal is NUM columns wide
-x list entries by lines instead of by columns
-X sort the listing by extension
-h print sizes in human readable format (e.g., 1K 243M 2G )
-k print security context
-K print security context in long format
-------------------------------
lsmod
lsmod
List the currently loaded kernel modules.
------------------------------
makedevs
makedevs NAME TYPE MAJOR MINOR FIRST LAST
Creates a range of block or character special files
TYPEs include:
b: Make a block (buffered) device.
c or u: Make a character (un-buffered) device.
p: Make a named pipe. MAJOR and MINOR are ignored for named pipes.FIRST
specifies the number appended to NAME to create the first device. LAST specifies the number
of the last item that should be created. If ';s'; is the last argument, the base device is
created as well.
For example:
makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63
makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8Example:
# makedevs /dev/ttyS c 4 66 2 63
[creates ttyS2-ttyS63]
# makedevs /dev/hda b 3 0 0 8 s
[creates hda,hda1-hda8]
-------------------------------
md5sum
md5sum [OPTION] [FILEs...] or: md5sum [OPTION] -c [FILE]
Print or check MD5 checksums.
Options: With no FILE, or when FILE is -, read standard input.
-c check MD5 sums against given listThe following two options are useful only
when verifying checksums:
-s don';t output anything, status code shows success
-w warn about improperly formated MD5 checksum linesExample:
$ md5sum < busybox
6fd11e98b98a58f64ff3398d7b324003
$ md5sum busybox
6fd11e98b98a58f64ff3398d7b324003 busybox
$ md5sum -c -
6fd11e98b98a58f64ff3398d7b324003 busybox
busybox: OK
^D
-------------------------------
mesg
mesg [y|n]
mesg controls write access to your terminal
y Allow write access to your terminal.
n Disallow write access to your terminal.
-------------------------------
mkdir
mkdir [OPTION] DIRECTORY...
Create the DIRECTORY(ies) if they do not already exist
Options:
-m set permission mode (as in chmod), not rwxrwxrwx - umask
-p no error if existing, make parent directories as neededExample:
$ mkdir /tmp/foo
$ mkdir /tmp/foo
/tmp/foo: File exists
$ mkdir /tmp/foo/bar/baz
/tmp/foo/bar/baz: No such file or directory
$ mkdir -p /tmp/foo/bar/baz
-------------------------------
mkfifo
mkfifo [OPTIONS] name
Creates a named pipe (identical to ';mknod name p';)
Options:
-m create the pipe using the specified mode (default a=rw)
-------------------------------
mkfs.minix
mkfs.minix [-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]
Make a MINIX filesystem.
Options:
-c Check the device for bad blocks
-n [14|30] Specify the maximum length of filenames
-i INODES Specify the number of inodes for the filesystem
-l FILENAME Read the bad blocks list from FILENAME
-v Make a Minix version 2 filesystem
-------------------------------
mknod
mknod [OPTIONS] NAME TYPE MAJOR MINOR
Create a special file (block, character, or pipe).
Options:
-m create the special file using the specified mode (default a=rw)TYPEs
include:
b: Make a block (buffered) device.
c or u: Make a character (un-buffered) device.
p: Make a named pipe. MAJOR and MINOR are ignored for named pipes.Example:
$ mknod /dev/fd0 b 2 0
$ mknod -m 644 /tmp/pipe p
-------------------------------
mkswap
mkswap [-c] [-v0|-v1] device [block-count]
Prepare a disk partition to be used as a swap partition.
Options:
-c Check for read-ability.
-v0 Make version 0 swap [max 128 Megs].
-v1 Make version 1 swap [big!] (default for kernels >
2.1.117).
block-count Number of block to use (default is entire partition).
-------------------------------
mktemp
mktemp [-dq] TEMPLATE
Creates a temporary file with its name based on TEMPLATE. TEMPLATE is any name with six `Xs';
(i.e., /tmp/temp.XXXXXX).
Options:
-d Make a directory instead of a file
-q Fail silently if an error occursExample:
$ mktemp /tmp/temp.XXXXXX
/tmp/temp.mWiLjM
$ ls -la /tmp/temp.mWiLjM
-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM
-------------------------------
modprobe
modprobe [-knqrsv] [MODULE ...]
Used for high level module loading and unloading.
Options:
-k Make module autoclean-able.
-n Just show what would be done.
-q Quiet output.
-r Remove module (stacks) or do autoclean.
-s Report via syslog instead of stderr.
-v Verbose output.Example:
$ modprobe cdrom
-------------------------------
more
more [FILE ...]
More is a filter for viewing FILE one screenful at a time.
Example:
$ dmesg | more
-------------------------------
mount
mount [flags] DEVICE NODE [-o options,more-options]
Mount a filesystem. Autodetection of filesystem type requires the /proc filesystem be
already mounted.
Flags:
-a: Mount all filesystems in fstab.
-f: "Fake" Add entry to mount table but don';t mount it.
-n: Don';t write a mount table entry.
-o option: One of many filesystem options, listed below.
-r: Mount the filesystem read-only.
-t fs-type: Specify the filesystem type.
-w: Mount for reading and writing (default).Options for use with the ``
-o';'; flag:
async/sync: Writes are asynchronous / synchronous.
atime/noatime: Enable / disable updates to inode access times.
dev/nodev: Allow use of special device files / disallow them.
exec/noexec: Allow use of executable files / disallow them.
loop: Mounts a file via loop device.
suid/nosuid: Allow set-user-id-root programs / disallow them.
remount: Re-mount a mounted filesystem, changing its flags.
ro/rw: Mount for read-only / read-write.
bind: Use the linux 2.4.x "bind" feature.There are EVEN MORE flags that
are specific to each filesystem. You';ll have to see the written documentation for those
filesystems.
Example:
$ mount
/dev/hda3 on / type minix (rw)
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw)
$ mount /dev/fd0 /mnt -t msdos -o ro
$ mount /tmp/diskimage /opt -t ext2 -o loop
-------------------------------
mt
mt [-f device] opcode value
Control magnetic tape drive operation
Available Opcodes:
bsf bsfm bsr bss datacompression drvbuffer eof eom erase fsf fsfm fsr fss load lock mkpart
nop offline ras1 ras2 ras3 reset retension rewind rewoffline seek setblk setdensity setpart
tell unload unlock weof wset
-------------------------------
mv
mv [OPTION]... SOURCE DEST or: mv [OPTION]... SOURCE... DIRECTORY
Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY.
Options:
-f don';t prompt before overwriting
-i interactive, prompt before overwriteExample:
$ mv /tmp/foo /bin/bar
-------------------------------
nameif
nameif [-s] [-c FILE] [{IFNAME MACADDR}]
Nameif renaming network interface while it in the down state.
Options:
-c FILE Use configuration file (default is /etc/mactab)
-s Use syslog (LOCAL0 facility).
IFNAME MACADDR new_interface_name interface_mac_addressExample:
$ nameif -s dmz0 00:A0:C9:8C:F6:3F
or
$ nameif -c /etc/my_mactab_file
-------------------------------
nc
nc [OPTIONS] [IP] [port]
Netcat opens a pipe to IP:port
Options:
-l listen mode, for inbound connects
-p PORT local port number
-i SECS delay interval for lines sent
-e PROG program to exec after connect (dangerous!)Example:
$ nc foobar.somedomain.com 25
220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600
help
214-Commands supported:
214- HELO EHLO MAIL RCPT DATA AUTH
214 NOOP QUIT RSET HELP
quit
221 foobar closing connection
-------------------------------
netstat
netstat [-laenrtuwx]
Netstat displays Linux networking information.
Options:
-l display listening server sockets
-a display all sockets (default: connected)
-e display other/more information
-n don';t resolve names
-r display routing table
-t tcp sockets
-u udp sockets
-w raw sockets
-x unix sockets
-------------------------------
nslookup
nslookup [HOST] [SERVER]
Queries the nameserver for the IP address of the given HOST optionally using a specified DNS
server
Example:
$ nslookup localhost
Server: default
Address: default
Name: debian
Address: 127.0.0.1
-------------------------------
od
od [-aBbcDdeFfHhIiLlOovXx] [FILE]
Write an unambiguous representation, octal bytes by default, of FILE to standard output.
With no FILE, or when FILE is -, read standard input.
-------------------------------
openvt
openvt <vtnum> <COMMAND> [ARGS...]
Start a command on a new virtual terminal
Example:
openvt 2 /bin/ash
-------------------------------
passwd
passwd [OPTION] [name]
Change a user password. If no name is specified, changes the password for the current user.
Options:
-a Define which algorithm shall be used for the password.
(Choices: des, md5 PASSWORD_ALG_TYPES(", sha1") )
-d Delete the password for the specified user account.
-l Locks (disables) the specified user account.
-u Unlocks (re-enables) the specified user account.
---------------------------patch
patch [-p<num>]
[-p<num>]
Example:
$ patch -p1 <example.diff
-------------------------------
pidof
pidof process-name [OPTION] [process-name ...]
Lists the PIDs of all processes with names that match the names on the command line.
Options:
-s display only a single PID.Example:
$ pidof init
1
-------------------------------
ping
ping [OPTION]... host
Send ICMP ECHO_REQUEST packets to network hosts.
Options:
-c COUNT Send only COUNT pings.
-s SIZE Send SIZE data bytes in packets (default=56).
-q Quiet mode, only displays output at start
and when finished.Example:
$ ping localhost
PING slag (127.0.0.1): 56 data bytes
64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms
--- debian ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 20.1/20.1/20.1 ms
-------------------------------
ping6
ping6 [OPTION]... host
Send ICMP ECHO_REQUEST packets to network hosts.
Options:
-c COUNT Send only COUNT pings.
-s SIZE Send SIZE data bytes in packets (default=56).
-q Quiet mode, only displays output at start
and when finished.Example:
$ ping6 ip6-localhost
PING ip6-localhost (::1): 56 data bytes
64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms
--- ip6-localhost ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 20.1/20.1/20.1 ms
------------------------------
pivot_root
pivot_root NEW_ROOT PUT_OLD
Move the current root file system to PUT_OLD and make NEW_ROOT the new root file system.
-------------------------------
poweroff
poweroff [-d<delay>]
Halt the system and request that the kernel shut off the power. Options:
-d delay interval for shutting off.
-------------------------------
printf
printf FORMAT [ARGUMENT...]
Formats and prints ARGUMENT(s) according to FORMAT, Where FORMAT controls the output exactly
as in C printf.
Example:
$ printf "Val=%d\n" 5
Val=5
-------------------------------
ps
ps
Report process status
This version of ps accepts no options.
Options: -c show SE Linux contextExample:
$ ps
PID Uid Gid State Command
1 root root S init
2 root root S [kflushd]
3 root root S [kupdate]
4 root root S [kpiod]
5 root root S [kswapd]
742 andersen andersen S [bash]
743 andersen andersen S -bash
745 root root S [getty]
2990 andersen andersen R ps
-------------------------------
pwd
pwd
Print the full filename of the current working directory.
Example:
$ pwd
/root
-------------------------------
rdate
rdate [-sp] HOST
Get and possibly set the system date and time from a remote HOST.
Options:
-s Set the system date and time (default).
-p Print the date and time.
-------------------------------
readlink
readlink
Displays the value of a symbolic link.
-------------------------------
realpath
realpath pathname ...
Returns the absolute pathnames of given argument.
-------------------------------
reboot
reboot [-d<delay>]
Reboot the system. Options:
-d delay interval for rebooting.
-------------------------------
renice
renice priority pid [pid ...]
Changes priority of running processes. Allowed priorities range from 20 (the process runs
only when nothing else is running) to 0 (default priority) to -20 (almost nothing else ever
gets to run).
-------------------------------
reset
reset
Resets the screen.
-------------------------------
rm
rm [OPTION]... FILE...
Remove (unlink) the FILE(s). You may use ';--'; to indicate that all following arguments are
non-options.
Options:
-i always prompt before removing each destination
-f remove existing destinations, never prompt
-r or -R remove the contents of directories recursivelyExample:
$ rm -rf /tmp/foo
-------------------------------
rmdir
rmdir [OPTION]... DIRECTORY...
Remove the DIRECTORY(ies), if they are empty.
Example:
# rmdir /tmp/foo
-------------------------------
rmmod
rmmod [OPTION]... [MODULE]...
Unloads the specified kernel modules from the kernel.
Options:
-a Remove all unused modules (recursively)Example:
$ rmmod tulip
-------------------------------
route
route [{add|del|delete}]
Edit the kernel';s routing tables.
Options:
-n Dont resolve names.
-e Display other/more information.
-A inet{6} Select address family.
-------------------------------
rpm
rpm -i -q[ildc]p package.rpm
Manipulates RPM packages
Options:
-i Install package
-q Query package
-p Query uninstalled package
-i Show information
-l List contents
-d List documents
-c List config files
-------------------------------
rpm2cpio
rpm2cpio package.rpm
Outputs a cpio archive of the rpm file.
-------------------------------
run-parts
run-parts [-t] [-a ARG] [-u MASK] DIRECTORY
Run a bunch of scripts in a directory.
Options:
-t Prints what would be run, but does not actually run anything.
-a ARG Pass ARG as an argument for every program invoked.
-u MASK Set the umask to MASK before executing every program.
----------------------rx
rx FILE
Receive a file using the xmodem protocol.
Example:
$ rx /tmp/foo
-------------------------------
sed
sed [-efinr] pattern [files...]
Options:
-e script add the script to the commands to be executed
-f scriptfile add script-file contents to the
commands to be executed
-i edit files in-place
-n suppress automatic pri |
粤公网安备44152102000001号 
发表于 2005-9-13 12:33:12