创维SK-D746如何查telnet 的账号密码，TTL命令如何用

yangpan12345678

UserName: telecomadmin
Password: ********

ECNT> cd/user
Unknown command '▒cd/user' - try 'help'
ECNT> help
?       - alias for 'help'
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootflag- bootflag read/swap command

bootm   - boot application image from memory
chpart  - change active partition
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
dcache  - enable or disable data cache
echo    - echo args to console
editenv - edit environment variable
efuse   - efuse - efuse command

env     - environment handling commands
exit    - exit script
false   - do nothing, unsuccessfully
fdt     - flattened device tree utility commands
fip_test- fip_test - test command

flash   - flash - flash command

go      - start application at address 'addr'
help    - print command description/usage
icache  - enable or disable instruction cache
imginfo - imginfo - Show tclinux.bin version command

iminfo  - print header information for application image
imxtract- extract a part of a multi-image
itest   - return true/false on integer compare
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loadx   - load binary file over serial line (xmodem mode)
loady   - load binary file over serial line (ymodem mode)
loop    - infinite loop on address range
md      - memory display
mm      - memory modify (auto-incrementing address)
mtd     - mtd - mtd  command

mtdparts- define flash/nand partitions
mw      - memory write (fill)
nm      - memory modify (constant address)
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
showvar - print local hushshell variables
sleep   - delay execution for some time
source  - run script from memory
sr_test - sr_test - test command

test    - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
true    - do nothing, successfully
version - print monitor, compiler and linker version

l3264871

telnet_username=CMCCAdmin
telnet_passwd=s2@We3%Dc#

邪恶海盗

1.加密,查不到

2.渣度一下,你就上当

yangpan12345678

已经花20元买来了，就是改不了地区，谁有改地区方法、

雷诺linux1

以前整过一个，telnet账号密码就是useradmin 和Pon521。但是总是登不上去提示错误，后来破解开配置文件后查找telnet配置。结果发现配置里写的就是这俩。当时就服了。后来自己修改了自己设置的。结果正常能用自己设置的，证明配置文件修改有效。但是原始文件中的Pon521为什么登不上去就还是未知数。

l3264871

yangpan12345678 发表于 2023-12-5 10:28
已经花20元买来了，就是改不了地区，谁有改地区方法、

求分享下TELNET用户名和密码！

lichaoman

求之不得，感谢了

138112

看看，学习一下

nanyao

修改创维sn,mac的命令是什么

CONQUEROR_

请教各位大佬，如何开启创维光猫telnet，网上的方法无效。