找回密码
 注册

QQ登录

只需一步,快速开始

查看: 10169|回复: 14

R019固件启动信息!!!!!!!!!!

[复制链接]
发表于 2019-2-28 00:03:39 | 显示全部楼层 |阅读模式
本帖最后由 yuanxun9 于 2019-2-28 00:05 编辑

R019固件启动信息!大神们看看shell补全有突破口吗?
SU_WAP>display startup info
2019-02-27 23:29:16 <5> Virtual kernel memory layout:
2019-02-27 23:29:16 <5>     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
2019-02-27 23:29:16 <5>     fixmap  : 0xffe00000 - 0xfffe0000   (1920 kB)
2019-02-27 23:29:16 <5>     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
2019-02-27 23:29:16 <5>     lowmem  : 0xc0000000 - 0xdf700000   ( 503 MB)
2019-02-27 23:29:16 <5>     modules : 0xbf000000 - 0xc0000000   (  16 MB)
2019-02-27 23:29:16 <5>       .text : 0xc0008000 - 0xc04350e0   (4277 kB)
2019-02-27 23:29:16 <5>       .init : 0xc0436000 - 0xc0462d40   ( 180 kB)
2019-02-27 23:29:16 <5>       .data : 0xc0464000 - 0xc04ab3c8   ( 285 kB)
2019-02-27 23:29:16 <5>        .bss : 0xc04ab3c8 - 0xc04d4108   ( 164 kB)
2019-02-27 23:29:16 <6> SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
2019-02-27 23:29:16 <6> Hierarchical RCU implementation.
2019-02-27 23:29:16 <6> NR_IRQS:512
2019-02-27 23:29:16 <3> smp_twd: clock not found -2
2019-02-27 23:29:16 <6> sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 42949ms
2019-02-27 23:29:16 <4> [DTS][LED]-->WARN:Cannot find led info in dtb,make sure there is no led on board
2019-02-27 23:29:16 <6> Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
2019-02-27 23:29:16 <6> pid_max: default: 32768 minimum: 301
2019-02-27 23:29:16 <6> Security Framework initialized
2019-02-27 23:29:16 <6> Mount-cache hash table entries: 512
2019-02-27 23:29:16 <6> Initializing cgroup subsys memory
2019-02-27 23:29:16 <6> Initializing cgroup subsys devices
2019-02-27 23:29:16 <6> Initializing cgroup subsys freezer
2019-02-27 23:29:16 <6> Initializing cgroup subsys net_cls
2019-02-27 23:29:16 <6> Initializing cgroup subsys blkio
2019-02-27 23:29:16 <6> Initializing cgroup subsys net_prio
2019-02-27 23:29:16 <6> CPU: Testing write buffer coherency: ok
2019-02-27 23:29:16 <6> Calibrating local timer... 199.89MHz.
2019-02-27 23:29:16 <6> Setting up static identity map for 0xc0318498 - 0xc03184cc
2019-02-27 23:29:16 <4> SD511x chip id:0x51176100
2019-02-27 23:29:16 <3> sd511x_core_reset cpu : 1  mask=200
2019-02-27 23:29:16 <4> CPU1: Booted secondary processor
2019-02-27 23:29:16 <6> Brought up 2 CPUs
2019-02-27 23:29:16 <6> SMP: Total of 2 processors activated (3188.32 BogoMIPS).
2019-02-27 23:29:16 <6> CPU: All CPU(s) started in SVC mode.
2019-02-27 23:29:16 <6> NET: Registered protocol family 16
2019-02-27 23:29:16 <6> DMA: preallocated 4096 KiB pool for atomic coherent allocations
2019-02-27 23:29:16 <6> L310 cache controller enabled
2019-02-27 23:29:16 <6> l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x02430001, Cache size: 262144 B
2019-02-27 23:29:16 <6> bio: create slab <bio-0> at 0
2019-02-27 23:29:16 <6> cfg80211: Calling CRDA to update world regulatory domain
2019-02-27 23:29:16 <6> Switching to clocksource arm,sp804
2019-02-27 23:29:16 <6> NET: Registered protocol family 2
2019-02-27 23:29:16 <6> TCP established hash table entries: 4096 (order: 3, 32768 bytes)
2019-02-27 23:29:16 <6> TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
2019-02-27 23:29:16 <6> TCP: Hash tables configured (established 4096 bind 4096)
2019-02-27 23:29:16 <6> TCP: reno registered
2019-02-27 23:29:16 <6> UDP hash table entries: 256 (order: 1, 12288 bytes)
2019-02-27 23:29:16 <6> UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
2019-02-27 23:29:16 <6> NET: Registered protocol family 1
2019-02-27 23:29:16 <7> PCI: CLS 0 bytes, default 64
2019-02-27 23:29:16 <6> squashfs: version 4.0 (2009/01/31) Phillip Lougher
2019-02-27 23:29:16 <6> jffs2: version 2.2. 漏 2001-2006 Red Hat, Inc.
2019-02-27 23:29:16 <6> fuse init (API version 7.22)
2019-02-27 23:29:16 <6> msgmni has been set to 983
2019-02-27 23:29:16 <6> io scheduler noop registered
2019-02-27 23:29:16 <6> io scheduler deadline registered
2019-02-27 23:29:16 <6> io scheduler cfq registered (default)
2019-02-27 23:29:16 <6> brd: module loaded
2019-02-27 23:29:16 <3> mtdoops: mtd device (mtddev=name/number) must be supplied
2019-02-27 23:29:16 <4> Spi id table Version 1.22
2019-02-27 23:29:16 <4> Special nand id table Version 1.33
2019-02-27 23:29:16 <4> Hisilicon Flash Memory Controller V100 Device Driver, Version 1.0
2019-02-27 23:29:16 <4> flash_type = 0x6
2019-02-27 23:29:16 <4> SPI_NAND_FLASH_TYPE
2019-02-27 23:29:16 <4> Nand ID: 0xEF 0xAA 0x21 0x00 0x00 0x00 0x00 0x00
2019-02-27 23:29:16 <4> ECC Match pagesize:2K, oobzie:64, ecctype:8bit
2019-02-27 23:29:16 <4> Nand(Hardware): Block:128KB Page:2KB Chip:128MB OOB:64B ECC:8bit
2019-02-27 23:29:16 <6> NAND device: Manufacturer ID: 0xef, Chip ID: 0xaa (Winbond W25N01GV), 128MiB, page size: 2048, OOB size: 64
2019-02-27 23:29:16 <4> NAND_ECC_NONE selected by board driver. This is not recommended!
2019-02-27 23:29:16 <4> raw_mtd: treat mtd0 as raw mtd.
2019-02-27 23:29:16 <5> 2 cmdlinepart partitions found on MTD device hinand
2019-02-27 23:29:16 <5> Creating 2 MTD partitions on "hinand":
2019-02-27 23:29:16 <5> 0x000000000000-0x000000100000 : "bootcode"
2019-02-27 23:29:16 <5> 0x000000100000-0x000008000000 : "ubilayer_v5"
2019-02-27 23:29:16 <6> softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
2019-02-27 23:29:16 <6> TCP: cubic registered
2019-02-27 23:29:16 <6> NET: Registered protocol family 17
2019-02-27 23:29:16 <6> ThumbEE CPU extension supported.
2019-02-27 23:29:16 <5> mapp kbox ddrram_address=0,                     ddrram_size=0 fail
2019-02-27 23:29:16 <5> [WARNNING]:Kbox device descriptor struct kbox_dev_des           Intialization Failed
2019-02-27 23:29:16 <4> kbox: init ddrram fail ret=-99
2019-02-27 23:29:16 <4> kbox: load OK
2019-02-27 23:29:16 <5> UBI: attaching mtd1 to ubi0
2019-02-27 23:29:16 <5> UBI: scanning is finished
2019-02-27 23:29:17 <5> UBI: attached mtd1 (name "ubilayer_v5", size 127 MiB) to ubi0
2019-02-27 23:29:17 <5> UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
2019-02-27 23:29:17 <5> UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
2019-02-27 23:29:17 <5> UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
2019-02-27 23:29:17 <5> UBI: good PEBs: 1016, bad PEBs: 0, corrupted PEBs: 0
2019-02-27 23:29:17 <5> UBI: user volume: 13, internal volumes: 1, max. volumes count: 128
2019-02-27 23:29:17 <5> UBI: max/mean erase counter: 53/17, WL threshold: 512, image sequence number: 1520333709
2019-02-27 23:29:17 <5> UBI: available PEBs: 2, total reserved PEBs: 1014, PEBs reserved for bad PEB handling: 20
2019-02-27 23:29:17 <5> UBI: background thread "ubi_bgt0d" started, PID 315
2019-02-27 23:29:17 <3> Warning: unable to open an initial console.
2019-02-27 23:29:17 <6> squashfs_cache_init: sqcachesize=8.
2019-02-27 23:29:17 <6> VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
2019-02-27 23:29:17 <6> Freeing unused kernel memory: 176K (c0436000 - c0462000)
2019-02-27 23:29:17 <1> ******** Total Boot time: 1062 ms, uncompress initrd cost 0 ms ********
2019-02-27 23:29:17 <6> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
2019-02-27 23:29:17 <6> 1010e000.uart: ttyAMA0 at MMIO 0x1010e000 (irq = 77) is a 16550A
2019-02-27 23:29:17 <6> 1010f000.uart: ttyAMA1 at MMIO 0x1010f000 (irq = 78) is a 16550A
2019-02-27 23:29:17 <6> console [ttyAMA1] enabled
2019-02-27 23:29:17 <4> hi_wdt: User-Mode!
2019-02-27 23:29:17 <4> register_reset_notifier success
2019-02-27 23:29:17 <4> hi_wdt: Init sucessfull!
2019-02-27 23:29:17 <6> nf_conntrack version 0.5.0 (7869 buckets, 31476 max)
2019-02-27 23:29:18 <6> Netfilter messages via NETLINK v0.30.
2019-02-27 23:29:18 <6> arp_tables: (C) 2002 David S. Miller
2019-02-27 23:29:18 <6> ip_tables: (C) 2000-2006 Netfilter Core Team
2019-02-27 23:29:18 <4> hw_ssp_basic: module license 'Huawei Tech. Co., Ltd.' taints kernel.
2019-02-27 23:29:18 <4> Disabling lock debugging due to kernel taint
2019-02-27 23:29:18 <4> soc type:0x51176, load himem config from:/etc/wap/wap_ssp_basic.5117p.cfg
2019-02-27 23:29:18 <3> current lastword info:Add=0xe0b01000;max_num=300;Add1=0xe0b01000;Add2=0xe0b06000;Add3=0xe0b0b000;
2019-02-27 23:29:18 <4> hw_dm_init suc
2019-02-27 23:29:18 <4> hw_ssp_ker_functiming_init Successfully!
2019-02-27 23:29:18 <4> set log file to:/var/init_debug_bak.txt
2019-02-27 23:29:18 <5> UBIFS: background thread "ubifs_bgt0_12" started, PID 616
2019-02-27 23:29:18 <5> UBIFS: recovery needed
2019-02-27 23:29:18 <5> UBIFS: recovery completed
2019-02-27 23:29:18 <5> UBIFS: mounted UBI device 0, volume 12, name "file_system"
2019-02-27 23:29:18 <5> UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
2019-02-27 23:29:18 <5> UBIFS: FS size: 49012736 bytes (46 MiB, 386 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
2019-02-27 23:29:18 <5> UBIFS: reserved for root: 0 bytes (0 KiB)
2019-02-27 23:29:18 <5> UBIFS: media format: w4/r0 (latest is w4/r0), UUID F41A951D-119F-4AAD-AC57-50810B5EBA17, small LPT model
2019-02-27 23:29:19 <6> NET: Registered protocol family 10
2019-02-27 23:29:19 <6> loop: module loaded
2019-02-27 23:29:19 <4> ICMPv6: process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.base_reachable_time - use net.ipv6.neigh.default.base_reachable_time_ms instead
2019-02-27 23:29:19 <4>
2019-02-27 23:29:19 <4>  SYSCTL module is installed
2019-02-27 23:29:19 <4>
2019-02-27 23:29:19 <4>  SPI module is installed
2019-02-27 23:29:19 <4>
2019-02-27 23:29:19 <4>  GPIO module is installed
2019-02-27 23:29:19 <4>
2019-02-27 23:29:19 <4>  I2C module is installed
2019-02-27 23:29:19 <4>
2019-02-27 23:29:19 <4>  TIMER23 module is installed
2019-02-27 23:29:19 <4>
2019-02-27 23:29:19 <4>  SERDES module is intalled
2019-02-27 23:29:19 <4>
2019-02-27 23:29:19 <4>  HW module is installed
2019-02-27 23:29:19 <4>
2019-02-27 23:29:19 <4>  UART module is installed
2019-02-27 23:29:19 <4>
2019-02-27 23:29:19 <4>  DMA module is installed
2019-02-27 23:29:19 <4>
2019-02-27 23:29:19 <4>  CHIP module is installed
2019-02-27 23:29:19 <4> set mac work mode ge...set port mode PMODE_SGMII...set port tx/rx enable...set mac work mode ge...set port mode PMODE_SGMII...set port tx/rx enable...set mac work mode ge...set port mode PMODE_SGMII...set port tx/rx enable...set mac work mode ge...set port mode PMODE_SGMII...set port tx/rx enable...
2019-02-27 23:29:19 <4>  hi_adp_cnt module is installed
2019-02-27 23:29:20 <4>
2019-02-27 23:29:20 <4>  BRIDGE module is installed
2019-02-27 23:29:20 <4> PIE USE 2 cpus
2019-02-27 23:29:20 <4> @@@ set_dma_ops: name:eth0
2019-02-27 23:29:20 <4>
2019-02-27 23:29:20 <4>  PIE 10:14:56 module is installed
2019-02-27 23:29:20 <4>
2019-02-27 23:29:20 <4>  PON_LP module is installed
2019-02-27 23:29:20 <4>
2019-02-27 23:29:20 <4>  GPON module is installed
2019-02-27 23:29:20 <4>
2019-02-27 23:29:20 <4>  L3 module is installed
2019-02-27 23:29:20 <4>
2019-02-27 23:29:20 <4>  L3 API module is installed!
2019-02-27 23:29:20 <4>
2019-02-27 23:29:20 <4>  OAM module is installed
2019-02-27 23:29:20 <4> COMMON For LDSP Install Successfully...
2019-02-27 23:29:20 <4> GPIO For LDSP Install Successfully...
2019-02-27 23:29:20 <4> I2C For LDSP Install Successfully...
2019-02-27 23:29:20 <4> KEY For LDSP Install Successfully...
2019-02-27 23:29:20 <4> LED For LDSP Install Successfully...
2019-02-27 23:29:20 <4> UART For LDSP Install Successfully...
2019-02-27 23:29:20 <4> OPTIC For LDSP Install Successfully...
2019-02-27 23:29:20 <4> hw_wdt_ext_fiq_process ui_time=300
2019-02-27 23:29:20 <4> <ldsp>board version is 36
2019-02-27 23:29:20 <4> <ldsp>pcb version is 0
2019-02-27 23:29:20 <4> <ldsp>orig board version is 36
2019-02-27 23:29:20 <4> hw_wdt_ext_fiq_process ui_time=299
2019-02-27 23:29:20 <4> DEV For LDSP Install Successfully...
2019-02-27 23:29:20 <4> hn5176 For LDSP install successfully...
2019-02-27 23:29:20 <4> bob type is already know[4], don't need insmod M02103 KO!
2019-02-27 23:29:20 <4> bob type is already know[4], don't need insmod M02103 KO!
2019-02-27 23:29:20 <4>
2019-02-27 23:29:20 <4> [DM]ui_curr_soc_type = 12, ui_curr_soc_sub_type = 0
2019-02-27 23:29:20 <4> hw_dm_pdt_init_file_names /etc/wap/dm.cfg/pd_relation_5117p.cfg  /etc/wap/dm.cfg/topo_relation_5117p.cfg
2019-02-27 23:29:20 <4> hw_dm_init_data suc
2019-02-27 23:29:20 <4> hw_dm_pdt_init successfully...
2019-02-27 23:29:21 <0> [func:hw_feature_res_line_reader line:1393]: Repetat FT name:BBSP_FT_ROUTE_ISOLATION found!
2019-02-27 23:29:21 <0> [func:hw_feature_pdt_line_reader line:1440]: FT(FT_FIRST_ONLINE_FLAG) should not be Added here,use res file!
2019-02-27 23:29:21 <0> [func:hw_feature_pdt_line_reader line:1440]: FT(FT_SSMP_VIETTEL_8045MODE) should not be Added here,use res file!
2019-02-27 23:29:21 <0> [func:hw_feature_pdt_line_reader line:1440]: FT(FT_PIE_ACK_IGNORE_ERRCODE) should not be Added here,use res file!
2019-02-27 23:29:21 <0> [func:hw_feature_pdt_line_reader line:1440]: FT(FT_TCPFLOW_MONITOR) should not be Added here,use res file!
2019-02-27 23:29:21 <0> [func:hw_feature_pdt_line_reader line:1440]: FT(FT_LOID_AND_APP_URL) should not be Added here,use res file!
2019-02-27 23:29:21 <0> [func:hw_feature_pdt_line_reader line:1440]: FT(FT_CWMP_MONITOR_INFORM_ONCE) should not be Added here,use res file!
2019-02-27 23:29:21 <0> [func:hw_feature_pdt_line_reader line:1440]: FT(HW_AMP_FEATURE_APPM_NOT_START) should not be Added here,use res file!
2019-02-27 23:29:21 <0> [func:hw_feature_pdt_line_reader line:1440]: FT(HW_FEATURE_OSGI) should not be Added here,use res file!
2019-02-27 23:29:21 <0> [func:hw_feature_pdt_line_reader line:1440]: FT(FT_WLAN_DFS_RESTORE) should not be Added here,use res file!
2019-02-27 23:29:21 <0> [func:hw_feature_pdt_line_reader line:1440]: FT(FT_WLAN_SHOW_FIRST_SSID) should not be Added here,use res file!
2019-02-27 23:29:21 <4> load ft
2019-02-27 23:29:21 <4> origin path:[/etc/wap/cust_feature.cfg]
2019-02-27 23:29:21 <6> squashfs_cache_init: sqcachesize=8.
2019-02-27 23:29:21 <6> squashfs_cache_init: sqcachesize=8.
2019-02-27 23:29:22 <6> squashfs_cache_init: sqcachesize=8.
2019-02-27 23:29:22 <4> pcie0 sel: 0x1, pcie1 sel:0x2,pcie0 memsize:0xa00000, pcie1 memsize:0xa00000.
2019-02-27 23:29:22 <4> PCIE0 1.1 Device Link Up val = 0x00808028, loop = 30.
2019-02-27 23:29:22 <4> PCIE1 1.1 Device Link Up val = 0x00808028, loop = 3.
2019-02-27 23:29:22 <6> PCI host bridge to bus 0000:00
2019-02-27 23:29:22 <6> pci_bus 0000:00: root bus resource [io  0x40a00000-0x40ffffff]
2019-02-27 23:29:22 <6> pci_bus 0000:00: root bus resource [mem 0x40000000-0x409fffff]
2019-02-27 23:29:22 <6> pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
2019-02-27 23:29:22 <7> pci 0000:00:00.0: [19e5:1151] type 00 class 0x028000
2019-02-27 23:29:22 <7> pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0003ffff]
2019-02-27 23:29:22 <7> pci 0000:00:00.0: supports D1 D2
2019-02-27 23:29:22 <7> pci 0000:00:00.0: PME# supported from D0 D1 D3hot
2019-02-27 23:29:22 <6> PCI: bus0: Fast back to back transfers disabled
2019-02-27 23:29:22 <7> pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
2019-02-27 23:29:22 <6> PCI host bridge to bus 0000:01
2019-02-27 23:29:22 <6> pci_bus 0000:01: root bus resource [io  0x58a00000-0x58ffffff]
2019-02-27 23:29:22 <6> pci_bus 0000:01: root bus resource [mem 0x58000000-0x589fffff]
2019-02-27 23:29:22 <6> pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
2019-02-27 23:29:22 <7> pci 0000:01:00.0: [19e5:1151] type 00 class 0x028000
2019-02-27 23:29:22 <7> pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0003ffff]
2019-02-27 23:29:22 <7> pci 0000:01:00.0: supports D1 D2
2019-02-27 23:29:22 <7> pci 0000:01:00.0: PME# supported from D0 D1 D3hot
2019-02-27 23:29:22 <6> PCI: bus1: Fast back to back transfers disabled
2019-02-27 23:29:22 <7> pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
2019-02-27 23:29:22 <6> pci 0000:01:00.0: BAR 0: assigned [mem 0x58000000-0x5803ffff]
2019-02-27 23:29:22 <6> pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4003ffff]
2019-02-27 23:29:22 <4> set_dma_ops: name:0000:00:00.0, vendor_id=6629, device_id=4433
2019-02-27 23:29:22 <4> set_dma_ops: name:0000:01:00.0, vendor_id=6629, device_id=4433
2019-02-27 23:29:22 <4> set_dma_ops done, total 2 devices.
2019-02-27 23:29:22 <4> AMP Module Install Successfully...
2019-02-27 23:29:22 <4> L2QOS Module Install Successfully...
2019-02-27 23:29:22 <4> GMAC Module Install Successfully...
2019-02-27 23:29:22 <4> PLOAM For LDSP Install Successfully...
2019-02-27 23:29:23 <4> kbox: ddrram: verify fs magic fail. It's ok if first time using this device
2019-02-27 23:29:23 <4> kbox_exception_dump abort for NULL dump_path!
2019-02-27 23:29:23 <4> kbox:create region panic, size=102400
2019-02-27 23:29:23 <7> register fiq129 callback
2019-02-27 23:29:23 <4> addr0, 0xdc808000
2019-02-27 23:29:23 <4> addr1, 0xdca1c000
2019-02-27 23:29:23 <4> addr2, 0xdca1e000
2019-02-27 23:29:23 <4> addr3, 0xdca20000
2019-02-27 23:29:23 <4> fiq_stack init ok
2019-02-27 23:29:23 <4> fiq_glue_register_handler, ok
2019-02-27 23:29:23 <6> fiq source is 1!
2019-02-27 23:29:23 <6> fiq type is 0!
2019-02-27 23:29:23 <6> fiq clean source is 0!
2019-02-27 23:29:23 <6> fiq dead loop is 1!
2019-02-27 23:29:23 <6> [fiq_set_gic]set 129 irq to fiq, Priority is 0.
2019-02-27 23:29:23 <6> [request_fiq]fiq first register succeed!
2019-02-27 23:29:23 <4> kbox:create region ks_main, size=98304
2019-02-27 23:29:23 <4> kbox:create region ks_0, size=4096
2019-02-27 23:29:23 <4> kbox:create region ks_1, size=4096
2019-02-27 23:29:23 <4> HIGHWAY For LDSP Install Successfully...
2019-02-27 23:29:23 <4> SPI For LDSP Install Successfully...
2019-02-27 23:29:23 <4> CODEC For LDSP Install Successfully...
2019-02-27 23:29:23 <5> SCSI subsystem initialized
2019-02-27 23:29:23 <6> usbcore: registered new interface driver usbfs
2019-02-27 23:29:23 <6> usbcore: registered new interface driver hub
2019-02-27 23:29:23 <6> usbcore: registered new device driver usb
2019-02-27 23:29:23 <6> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
2019-02-27 23:29:23 <4> hiusb_start_hcd sucessful(5117p)!
2019-02-27 23:29:23 <6> hiusb-ehci hiusb-ehci.0: HIUSB EHCI
2019-02-27 23:29:23 <6> hiusb-ehci hiusb-ehci.0: new USB bus registered, assigned bus number 1
2019-02-27 23:29:23 <6> hiusb-ehci hiusb-ehci.0: irq 68, io mem 0x10a40000
2019-02-27 23:29:23 <6> hiusb-ehci hiusb-ehci.0: USB 0.0 started, EHCI 1.00
2019-02-27 23:29:23 <6> hub 1-0:1.0: USB hub found
2019-02-27 23:29:23 <6> hub 1-0:1.0: 1 port detected
2019-02-27 23:29:23 <6> ehci-pci: EHCI PCI platform driver
2019-02-27 23:29:23 <6> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
2019-02-27 23:29:23 <6> hiusb-ohci hiusb-ohci.0: HIUSB OHCI
2019-02-27 23:29:23 <6> hiusb-ohci hiusb-ohci.0: new USB bus registered, assigned bus number 2
2019-02-27 23:29:23 <6> hiusb-ohci hiusb-ohci.0: irq 67, io mem 0x10a50000
2019-02-27 23:29:23 <6> hub 2-0:1.0: USB hub found
2019-02-27 23:29:23 <6> hub 2-0:1.0: 1 port detected
2019-02-27 23:29:23 <6> usbcore: registered new interface driver usb-storage
2019-02-27 23:29:23 <6> usbcore: registered new interface driver usblp
2019-02-27 23:29:23 <6> usbcore: registered new interface driver cdc_acm
2019-02-27 23:29:23 <6> cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
2019-02-27 23:29:23 <6> usbcore: registered new interface driver usbserial
2019-02-27 23:29:24 <6> usbcore: registered new interface driver pl2303
2019-02-27 23:29:24 <6> usbserial: USB Serial support registered for pl2303
2019-02-27 23:29:24 <6> usbcore: registered new interface driver cp210x
2019-02-27 23:29:24 <6> usbserial: USB Serial support registered for cp210x
2019-02-27 23:29:24 <6> usbcore: registered new interface driver ch341
2019-02-27 23:29:24 <6> usbserial: USB Serial support registered for ch341-uart
2019-02-27 23:29:24 <6> usbcore: registered new interface driver ftdi_sio
2019-02-27 23:29:24 <6> usbserial: USB Serial support registered for FTDI USB Serial Device
2019-02-27 23:29:24 <6> usbcore: registered new interface driver usbhid
2019-02-27 23:29:24 <6> usbhid: USB HID core driver
2019-02-27 23:29:24 <6> usbcore: registered new interface driver option
2019-02-27 23:29:24 <6> usbserial: USB Serial support registered for GSM modem (1-port)
2019-02-27 23:29:24 <4> iconv_init enter
2019-02-27 23:29:24 <4> USB For LDSP Install Successfully...
2019-02-27 23:29:24 <4> usb_init!
2019-02-27 23:29:24 <6> PPP generic driver version 2.4.2
2019-02-27 23:29:24 <6> NET: Registered protocol family 24
2019-02-27 23:29:24 <4>
2019-02-27 23:29:24 <4>  l2ffwd_init old!
2019-02-27 23:29:24 <4>
2019-02-27 23:29:24 <4>  btv_wifi_init soft_fwd_spec[-1089683004] ret[-148840440]
2019-02-27 23:29:24 <4>
2019-02-27 23:29:24 <4>  btv_fw_init success!
2019-02-27 23:29:24 <4> bbsp ptpdrv install ...... [OK]
2019-02-27 23:29:24 <4> hw_igmp_module_init ui_totalnum:45
2019-02-27 23:29:24 <4> hw_igmp_kernel Install Successfully...
2019-02-27 23:29:24 <4> pppoe_module_init load success!
2019-02-27 23:29:24 <4>
2019-02-27 23:29:24 <4>  vlanflt_module_init g_en_runningMode:0
2019-02-27 23:29:24 <4>
2019-02-27 23:29:24 <4>  Have no Res Mac config!
2019-02-27 23:29:24 <4> l2base For BBSP Install Successfully...
2019-02-27 23:29:24 <4> pdt l3 install start...
2019-02-27 23:29:24 <4> pdt l3 install successfully...
2019-02-27 23:29:24 <4> l2ext For BBSP Install Successfully...
2019-02-27 23:29:23 <4> LE964x For LDSP install successfully...pdt QOS install successfully...
2019-02-27 23:29:24 <4> [INFO] 1183 hw_wifi_diagnose_ct_init called
2019-02-27 23:29:24 <4> [INFO] 0 curren g_wlannum_ct: 2
2019-02-27 23:29:25 <4> vlanflt_module_init load success !
2019-02-27 23:29:25 <4> pppoe_cmd_module_init load success !
2019-02-27 23:29:25 <4> l3base for bbsp Install Successfully...
2019-02-27 23:29:25 <4> linux kernel dopra is installed!
2019-02-27 23:29:25 <4>
2019-02-27 23:29:25 <4> dsp sdk insmod success! Addr: 0x9c600000 0xe05df000 0x9c5c0000 0xe06e0000.
2019-02-27 23:29:25 <4> SDK soc type 0
2019-02-27 23:29:25 <4> DSP For VOICE Install Successfully...
2019-02-27 23:29:25 <6> gre: GRE over IPv4 demultiplexor driver
2019-02-27 23:29:25 <6> ip_gre: GRE over IPv4 tunneling driver
2019-02-27 23:29:25 <4> arp_config_bridge_filter:
2019-02-27 23:29:25 <4> hw_arp_announce_module_init load success !
2019-02-27 23:29:25 <4> arp_module_init load success !
2019-02-27 23:29:25 <4> hw_route_ipv4_module_init in
2019-02-27 23:29:25 <4> Route ipv4 for bbsp Install Successfully...
2019-02-27 23:29:25 <4> Neighbour discovery for bbsp Install Successfully...
2019-02-27 23:29:25 <4> Portal For BBSP Install Successfully...
2019-02-27 23:29:25 <4> User device for bbsp Install Successfully...
2019-02-27 23:29:25 <4>
2019-02-27 23:29:25 <4> ====hw_firewall_log_hook is registered!
2019-02-27 23:29:25 <4> hw_conntrack_dyn_rsv_ini v1.0!
2019-02-27 23:29:25 <4> ipfpm_pathdata_init Successfully...
2019-02-27 23:29:25 <4> [hw_nd_init]
2019-02-27 23:29:25 <4> l3ext for bbsp Install Successfully...
2019-02-27 23:29:25 <4> conenat init success
2019-02-27 23:29:25 <4>
2019-02-27 23:29:25 <4>  hw_ker_capture_useragent_proc_init type[0] succ!
2019-02-27 23:29:25 <4>
2019-02-27 23:29:25 <4>  hw_ker_capture_add_callback type[0] succ!
2019-02-27 23:29:25 <4>
2019-02-27 23:29:25 <4>  hw_ker_capture_init_callback succ!
2019-02-27 23:29:25 <4>
2019-02-27 23:29:25 <4>  hw_ker_capture_useragent_proc_init type[0] succ!
2019-02-27 23:29:25 <4>
2019-02-27 23:29:25 <4>  hw_ker_capture_add_callback type[0] succ!
2019-02-27 23:29:25 <6> ip6_tables: (C) 2000-2006 Netfilter Core Team
2019-02-27 23:29:25 <6> sit: IPv6 over IPv4 tunneling driver
2019-02-27 23:29:25 <4> hw_route_ipv6_module_init in
2019-02-27 23:29:25 <4> Route ipv6 for bbsp Install Successfully
2019-02-27 23:29:26 <4>
2019-02-27 23:29:26 <4> [ker_L2M_CTP] for bbsp Install Successfully...
2019-02-27 23:29:26 <4> [IPv6 Session]pdt start to install...
2019-02-27 23:29:26 <4> [IPv6 Session]pdt install successfully...
2019-02-27 23:29:26 <4> pdt l3 install successfully...
2019-02-27 23:29:26 <4> ker_video_diag For BBSP Install Successfully...
2019-02-27 23:29:26 <6> l2tp_core: L2TP core driver, V2.0
2019-02-27 23:29:26 <6> l2tp_ppp: PPPoL2TP kernel driver, V2.0
2019-02-27 23:29:26 <4>
2019-02-27 23:29:26 <4> type: 0, pool: 0xdab2cb00, cur:512, max:512
2019-02-27 23:29:26 <4>
2019-02-27 23:29:26 <4> type: 1, pool: 0xdab2cb40, cur:1536, max:1536
2019-02-27 23:29:26 <4>
2019-02-27 23:29:26 <4> type: 2, pool: 0xdab2cc00, cur:2048, max:2048
2019-02-27 23:29:26 <4>
2019-02-27 23:29:26 <4> @@@@@@ skpool_init success @@@@@@
2019-02-27 23:29:26 <4>
2019-02-27 23:29:26 <4> [ker_pdt_wifi] for bbsp Install Successfully...
2019-02-27 23:29:26 <4> <LDSP> system has slave space for bob
2019-02-27 23:29:26 <4> SD511X test self OK
2019-02-27 23:29:26 <4> Optic test self NoCheck
2019-02-27 23:29:26 <4> WIFI test self OK
2019-02-27 23:29:26 <4> PHY[1] test self OK
2019-02-27 23:29:26 <4> PHY[2] test self OK
2019-02-27 23:29:26 <4> PHY[3] test self OK
2019-02-27 23:29:26 <4> PHY[4] test self OK
2019-02-27 23:29:26 <4> PHY[5] test self OK
2019-02-27 23:29:26 <4> ExtRF  test self NoCheck
2019-02-27 23:29:26 <4> Create key, key_gpio=31, key_ext=0
2019-02-27 23:29:26 <4> Create key, key_gpio=255, key_ext=255
2019-02-27 23:29:26 <4> Create key, key_gpio=255, key_ext=255
2019-02-27 23:29:26 <4> Create key, key_gpio=255, key_ext=255
2019-02-27 23:29:26 <4> Create key, key_gpio=255, key_ext=255
2019-02-27 23:29:26 <4> Create key, key_gpio=255, key_ext=255
2019-02-27 23:29:26 <4> Create key, key_gpio=255, key_ext=255
2019-02-27 23:29:26 <4> Create key, key_gpio=255, key_ext=255
2019-02-27 23:29:26 <4> Create key, key_gpio=0, key_ext=0
2019-02-27 23:29:26 <4> Create key, key_gpio=0, key_ext=0
2019-02-27 23:29:26 <4>
2019-02-27 23:29:26 <4> <LDSP> bob optic was calibrated
2019-02-27 23:29:26 <4>
2019-02-27 23:29:26 <4> <LDSP> HN5176 optic . . .
2019-02-27 23:29:26 <4> <LDSP> HN5176 optic init success!
2019-02-27 23:29:26 <4> <LDSP> optic para load success!
2019-02-27 23:29:25 <4> Init hw ker capture ko succ .... !
2019-02-27 23:29:26 <6> hs_gmac_func_register ret=0x0!
kbox:create region deadlock, size=131072
2019-02-27 23:29:26 <6> GPON init success !
2019-02-27 23:29:26 <6>
2019-02-27 23:29:26 <4> wifi drv event modules init<6>[   10.885471] usb 1-1: new high-speed USB device number 2 using hiusb-ehci
2019-02-27 23:29:27 <6> usb-storage 1-1:1.0: USB Mass Storage device detected
2019-02-27 23:29:27 <6> scsi0 : usb-storage 1-1:1.0
2019-02-27 23:29:28 <6> scsi scan: INQUIRY result too short (5), using 36
2019-02-27 23:29:28 <5> scsi 0:0:0:0: Direct-Access     SCSI     DISK             1.00 PQ: 0 ANSI: 4
2019-02-27 23:29:28 <3> <3007>usb storge probe notify
2019-02-27 23:29:28 <4> Enter usbstorage
2019-02-27 23:29:28 <5> sd 0:0:0:0: [sda] 30145216 512-byte logical blocks: (15.4 GB/14.3 GiB)
2019-02-27 23:29:28 <5> sd 0:0:0:0: [sda] Write Protect is off
2019-02-27 23:29:28 <7> sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
2019-02-27 23:29:28 <3> sd 0:0:0:0: [sda] No Caching mode page found
2019-02-27 23:29:28 <3> sd 0:0:0:0: [sda] Assuming drive cache: write through
2019-02-27 23:29:28 <3> sd 0:0:0:0: [sda] No Caching mode page found
2019-02-27 23:29:28 <3> sd 0:0:0:0: [sda] Assuming drive cache: write through
2019-02-27 23:29:28 <6> scsi scan: INQUIRY result too short (5), using 36
2019-02-27 23:29:28 <6>  sda: sda1
2019-02-27 23:29:28 <5> scsi 0:0:0:1: CD-ROM            SCSI     DISK             1.00 PQ: 0 ANSI: 4
2019-02-27 23:29:28 <3> sd 0:0:0:0: [sda] No Caching mode page found
2019-02-27 23:29:28 <3> sd 0:0:0:0: [sda] Assuming drive cache: write through
2019-02-27 23:29:28 <5> sd 0:0:0:0: [sda] Attached SCSI removable disk
2019-02-27 23:29:29 <3> UBI error: ubi_open_volume: cannot open device 0, volume 12, error -16
2019-02-27 23:29:29 <3> ubi_open_volume error with 2, try UBI_READONLY;
2019-02-27 23:29:30 <4> [hw_ssp_ker_diag_setpminfo_ioctl] uiPid:1514
2019-02-27 23:29:30 <4> hw_wdt_ext_fiq_process ui_time=300
2019-02-27 23:29:31 <4>
2019-02-27 23:29:31 <4> ==gemport iso force 0
2019-02-27 23:29:31 <4> [func:dp_init line:7869]: datapath v1.2 install success! (max=32000 bucket=8192)
2019-02-27 23:29:31 <4> [func:dp_ext_init line:285]: dp_ext v1.2 install success!
2019-02-27 23:29:32 <4> [0452] hi_pdu_collision_check, faltal error: pdu_class[0] pdu[44](thick_A)  collide with trans_act[0]
2019-02-27 23:29:33 <4> ct dyn resv:0
2019-02-27 23:29:34 <4> [2257] hi_L2_flow_port_get_511x, warning: flow[9] not find
2019-02-27 23:29:34 <4> [8895] hi_vlan_user_add_511x, error: ret 0xfc000108 !
2019-02-27 23:29:34 <4> [2257] hi_L2_flow_port_get_511x, warning: flow[7] not find
2019-02-27 23:29:34 <4> [8895] hi_vlan_user_add_511x, error: ret 0xfc000108 !
2019-02-27 23:29:35 <4> [2257] hi_L2_flow_port_get_511x, warning: flow[10] not find
2019-02-27 23:29:35 <4> [8895] hi_vlan_user_add_511x, error: ret 0xfc000108 !
2019-02-27 23:29:35 <4>
2019-02-27 23:29:35 <4>  ppp_open: br0_ifindex 7
2019-02-27 23:29:35 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:15 curtask:bbsp rectask:dhcpd
2019-02-27 23:29:36 <4>
2019-02-27 23:29:36 <4>  nf_alg_rtsp_nat_policy:0
2019-02-27 23:29:37 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:15 curtask:BBSP_TASK rectask:dhcp6s
2019-02-27 23:29:39 <4> hi_omci_callback_hook: hw_ker_gmac_omci_recv
2019-02-27 23:29:39 <4>
2019-02-27 23:29:39 <4> [GONT_ReadRogueStatus]File not exist or Unable to open!
2019-02-27 23:29:39 <4>
2019-02-27 23:29:39 <4> [GONT_ReadEmergencyStatus]File not exist or Unable to open!
2019-02-27 23:29:39 <4> [PLOAM]ONUID(0): O1 => O1
2019-02-27 23:29:39 <4> [PLOAM]ONUID(0): O1 => O2
2019-02-27 23:29:39 <3> UBI error: ubi_open_volume: cannot open device 0, volume 12, error -16
2019-02-27 23:29:39 <3> ubi_open_volume error with 2, try UBI_READONLY;
2019-02-27 23:29:39 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:15 curtask:os_nl_recv rectask:dnsmasq
2019-02-27 23:29:39 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:15 curtask:os_nl_recv rectask:dnsmasq
2019-02-27 23:29:39 <4> FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
2019-02-27 23:29:39 <4> FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
2019-02-27 23:29:41 <4> [PLOAM]ONUID(0): O2 => O3
2019-02-27 23:29:42 <4> [PLOAM]ONUID(20): O3 => O4
2019-02-27 23:29:42 <4> [PLOAM]ONUID(20): O4 => O5
2019-02-27 23:29:43 <4> Init Access Mode To GPON .................
2019-02-27 23:29:43 <4>
2019-02-27 23:29:43 <4>  OS-Functions are registered !
2019-02-27 23:29:43 <4>  JB_InfoMalloc :
2019-02-27 23:29:43 <4>  JB_InfoMalloc 0 times !!
2019-02-27 23:29:43 <4>  PSTK_PortChIdHashTblMalloc :
2019-02-27 23:29:43 <4>  PSTK_PortChIdHashTblMalloc 0 times !!
2019-02-27 23:29:43 <4> fix g_uiCrgBaseAddr add 0x:e8126000CPU-TYPE=11
2019-02-27 23:29:43 <4>   HIAPI_ZspBootCompleteWait: Boot Complete!
2019-02-27 23:29:44 <4>  wifi para select A
2019-02-27 23:29:45 <4>
2019-02-27 23:29:45 <4> Slic init Start...
2019-02-27 23:29:45 <4> Slic type : 0x9
2019-02-27 23:29:45 <4> RCN:0x8 PCN:0x49
2019-02-27 23:29:45 <4> SUBPCN : 0x3c 0xcb 0xfd 0xfd
2019-02-27 23:29:45 <4>
2019-02-27 23:29:45 <4>  le964x init dev success!
2019-02-27 23:29:45 <4>
2019-02-27 23:29:45 <4>  le9641 cal channel dev success!
2019-02-27 23:29:45 <4>
2019-02-27 23:29:45 <4>  le964x hard init success!!!!!
2019-02-27 23:29:46 <7> oal_max_mum_core_init:online cores number is 2
2019-02-27 23:29:46 <7> oal_max_mum_core_init:hmac task @ core[0],dmac task @ core[1] default!
2019-02-27 23:29:46 <7> oal_cores_global_array_create: success to g_aul_irq_save_time, size=2040.
2019-02-27 23:29:46 <7> oal_pci_get_wlan_chips: get new pci dev, vendor = 0x19e5 , device = 0x1151 .
2019-02-27 23:29:46 <7> oal_pci_get_wlan_chips: get new pci dev, vendor = 0x19e5 , device = 0x1151 .
2019-02-27 23:29:46 <7>  oal_pci_get_wlan_chips: get_wlan_chips = 2.
2019-02-27 23:29:46 <7> [file = /usr1/code/ICP_HISI_SDK_R19C00/code/current/HISI_SDK/main/build/1151_host_wifi/../../drivers/platform/oal/oal_mem.c, line = 1572], oal_mem_init_pool, memory allocation 2903646 bytes !
2019-02-27 23:29:46 <7> PCI driver: driver init start.
2019-02-27 23:29:46 <7> pci probe begin!
2019-02-27 23:29:46 <4> PCI: enabling device 0000:00:00.0 (0140 -> 0142)
2019-02-27 23:29:46 <7> bar0: 0x40000000, len = 0x40000
2019-02-27 23:29:46 <7> bar1: 0x0, len = 0x0
2019-02-27 23:29:46 <7> bar2: 0x0, len = 0x0
2019-02-27 23:29:46 <7> bar3: 0x0, len = 0x0
2019-02-27 23:29:46 <7> bar4: 0x0, len = 0x0
2019-02-27 23:29:46 <7> bar5: 0x0, len = 0x0
2019-02-27 23:29:46 <7> BAR 0: set to [mem 0x40000000, len = 0x40000]
2019-02-27 23:29:46 <7> BAR 0: ioremap addr = 0xe8880000
2019-02-27 23:29:46 <7> pci_resource_start[0x40000000],pci_resource_en[0x4003ffff]
2019-02-27 23:29:46 <7> WITP: pci_dev->irq      : 91.
2019-02-27 23:29:46 <7> PCI driver: probe succ!
2019-02-27 23:29:46 <7> pci probe begin!
2019-02-27 23:29:46 <4> PCI: enabling device 0000:01:00.0 (0140 -> 0142)
2019-02-27 23:29:46 <7> bar0: 0x58000000, len = 0x40000
2019-02-27 23:29:46 <7> bar1: 0x0, len = 0x0
2019-02-27 23:29:46 <7> bar2: 0x0, len = 0x0
2019-02-27 23:29:46 <7> bar3: 0x0, len = 0x0
2019-02-27 23:29:46 <7> bar4: 0x0, len = 0x0
2019-02-27 23:29:46 <7> bar5: 0x0, len = 0x0
2019-02-27 23:29:46 <7> BAR 0: set to [mem 0x58000000, len = 0x40000]
2019-02-27 23:29:46 <7> BAR 0: ioremap addr = 0xe8900000
2019-02-27 23:29:46 <7> pci_resource_start[0x58000000],pci_resource_en[0x5803ffff]
2019-02-27 23:29:46 <7> WITP: pci_dev->irq      : 95.
2019-02-27 23:29:46 <7> PCI driver: probe succ!
2019-02-27 23:29:46 <7> oal_5115_pci_init,OAL_PCIE_SYS_BASE_PHYS=0x10161000,map g_pst_5115_sys_ctl = 0xe883a000
2019-02-27 23:29:46 <7> oam_pdt_log_init
2019-02-27 23:29:46 <7> ini_file_name@/var/cfg_ont_hisi.ini
2019-02-27 23:29:46 <7> frw_task_layout:plat has 2 core total,wifi task:[Hmac@core[0]--Dmac@core[1]]
2019-02-27 23:29:46 <7> frw_cores_global_array_create: success to alloc g_puc_frw_mem_bulk, total size=200.
2019-02-27 23:29:48 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:15 curtask:os_nl_recv rectask:dnsmasq
2019-02-27 23:29:48 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:15 curtask:os_nl_recv rectask:dnsmasq
2019-02-27 23:29:48 <7> sdt_drv_netlink_recv::recv oam_hisi message!
2019-02-27 23:29:48 <7> sdt_drv_netlink_recv::netbuf_len=32,nlmsg_space=16!
2019-02-27 23:29:48 <7> sdt_drv_netlink_recv::msg type is 0!
2019-02-27 23:29:48 <7> sdt_drv_netlink_recv::sdt_drv_netlink_recv pid is-->2741
2019-02-27 23:29:48 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:15 curtask:bbsp rectask:dhcp6s
2019-02-27 23:29:48 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:9 curtask:event_nl_msg rectask:sntp
2019-02-27 23:29:48 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:9 curtask:event_nl_msg rectask:sntp
2019-02-27 23:29:49 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:9 curtask:bbsp rectask:dhcp6s
2019-02-27 23:29:49 <7> Tick=4294701196, FileId=1611, LineNo=794, FuncName::hal_board_init, " Support max chip num: 2.
2019-02-27 23:29:49 <7> "
2019-02-27 23:29:49 <7>
2019-02-27 23:29:49 <7> Tick=4294701196, FileId=1611, LineNo=704, FuncName::hal_chip_init, "Chip version: 0x11510100.
2019-02-27 23:29:49 <7> "
2019-02-27 23:29:49 <7>
2019-02-27 23:29:49 <7> pci_resource_start[0x40000000],pci_resource_en[0x4003ffff]
2019-02-27 23:29:49 <7> {hi1151_initialize_phy_chip_id, double chip, 2g [1], 5g [0].}
2019-02-27 23:29:49 <7> chip id:33 version:01 chip func:03
2019-02-27 23:29:49 <7> this is Hi1151v210 chip
2019-02-27 23:29:50 <7> hi1151_irq_affinity_init::irq bind to core:[1]
2019-02-27 23:29:50 <7> hal_device_init:: hal_irq_affinity set to core[1].
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC0 ONE_ADD_DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC0 ONE_ADD_DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC0 ONE_ADD_DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC0 ONE_ADD_DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC0 ONE_ADD_DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC0 ONE_ADD_DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC0_COMP_CAL_CODE_A1 [22a] ADC0_COMP_CAL_CODE_A2 [d] ADC0_COMP_CAL_CODE_A3 [270]!
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::CALI_CHANNEL [0], Ma ADC_COMP_CAL_CODE_A1 [-2], ADC_COMP_CAL_CODE_A2 [0], ADC_COMP_CAL_CODE_A3 [-7]!
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::s_adc_comp_ta [23]
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::read sys ctl die id 24 [0x2240], id 25 [0x1670], id 26 [0x10c3]
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::CALI_CHANNEL [0], Mg ADC_COMP_CAL_CODE_A1 [-2], ADC_COMP_CAL_CODE_A2 [0], ADC_COMP_CAL_CODE_A3 [-7]!
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::us_cur_temp [0x1], s_adc_comp_cal_tg [20]
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::|Mg - Ma| < 8, set Ma
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::CALI_CHANNEL [0], Write ADC_COMP_CAL_CODE_A1 [-2], ADC_COMP_CAL_CODE_A2 [0], ADC_COMP_CAL_CODE_A3 [-7]!
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cap_cali::ADC0 CALI DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_dc_cali::ADC0 CALI DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC1 ONE_ADD_DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC1 ONE_ADD_DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC1 ONE_ADD_DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC1 ONE_ADD_DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC1 ONE_ADD_DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC1 ONE_ADD_DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::CALI_CHANNEL [1], Ma ADC_COMP_CAL_CODE_A1 [4], ADC_COMP_CAL_CODE_A2 [3], ADC_COMP_CAL_CODE_A3 [3]!
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::s_adc_comp_ta [23]
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::read sys ctl die id 24 [0x2240], id 25 [0x1670], id 26 [0x10c3]
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::CALI_CHANNEL [1], Mg ADC_COMP_CAL_CODE_A1 [5], ADC_COMP_CAL_CODE_A2 [3], ADC_COMP_CAL_CODE_A3 [3]!
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::us_cur_temp [0x1], s_adc_comp_cal_tg [20]
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::|Mg - Ma| < 8, set Ma
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::CALI_CHANNEL [1], Write ADC_COMP_CAL_CODE_A1 [4], ADC_COMP_CAL_CODE_A2 [3], ADC_COMP_CAL_CODE_A3 [3]!
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_cap_cali::ADC1 CALI DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_adc_dc_cali::ADC1 CALI DONE.
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_get_r_code::ul_reg_val [0x45c6]
2019-02-27 23:29:50 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:15 curtask:os_nl_recv rectask:dnsmasq
2019-02-27 23:29:50 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:15 curtask:os_nl_recv rectask:dnsmasq
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_get_pwr_curve::BEFORE abnormal avoiding:uc_loop[0].
2019-02-27 23:29:50 <7> 5G txpower comp[0][0]:csw_ppa[10], csw_mx[15], upc[14],dtx[64].
2019-02-27 23:29:50 <7> 5G txpower comp[0][1]:csw_ppa[6], csw_mx[11], upc[14],dtx[67].
2019-02-27 23:29:50 <7> 5G txpower comp[0][2]:csw_ppa[5], csw_mx[10], upc[17],dtx[63].
2019-02-27 23:29:50 <7> 5G txpower comp[0][3]:csw_ppa[6], csw_mx[8], upc[12],dtx[66].
2019-02-27 23:29:50 <7> 5G txpower comp[0][4]:csw_ppa[5], csw_mx[6], upc[14],dtx[64].
2019-02-27 23:29:50 <7> 5G txpower comp[0][5]:csw_ppa[5], csw_mx[5], upc[13],dtx[63].
2019-02-27 23:29:50 <7> 5G txpower comp[0][6]:csw_ppa[3], csw_mx[4], upc[15],dtx[63].
2019-02-27 23:29:50 <7> hi1151v2_rf_cali_get_pwr_curve::BEFORE abnormal avoiding:uc_loop[0].
2019-02-27 23:29:50 <7> 5G txpower comp[1][0]:csw_ppa[10], csw_mx[15], upc[14],dtx[65].
2019-02-27 23:29:50 <7> 5G txpower comp[1][1]:csw_ppa[8], csw_mx[11], upc[16],dtx[64].
2019-02-27 23:29:50 <7> 5G txpower comp[1][2]:csw_ppa[5], csw_mx[10], upc[17],dtx[63].
2019-02-27 23:29:50 <7> 5G txpower comp[1][3]:csw_ppa[6], csw_mx[7], upc[16],dtx[63].
2019-02-27 23:29:50 <7> 5G txpower comp[1][4]:csw_ppa[5], csw_mx[6], upc[17],dtx[63].
2019-02-27 23:29:50 <7> 5G txpower comp[1][5]:csw_ppa[5], csw_mx[5], upc[13],dtx[67].
2019-02-27 23:29:50 <7> 5G txpower comp[1][6]:csw_ppa[3], csw_mx[4], upc[13],dtx[65].
2019-02-27 23:29:52 <7> Tick=4294703966, FileId=1611, LineNo=704, FuncName::hal_chip_init, "Chip version: 0x11510100.
2019-02-27 23:29:52 <7> "
2019-02-27 23:29:52 <7>
2019-02-27 23:29:52 <7> pci_resource_start[0x58000000],pci_resource_en[0x5803ffff]
2019-02-27 23:29:52 <7> {hi1151_initialize_phy_chip_id, double chip, 2g [1], 5g [0].}
2019-02-27 23:29:52 <7> chip id:32 version:01 chip func:01
2019-02-27 23:29:52 <7> this is Hi1151sv208 chip
2019-02-27 23:29:52 <7> hi1151_irq_affinity_init::irq bind to core:[1]
2019-02-27 23:29:52 <7> hal_device_init:: hal_irq_affinity set to core[1].
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC0 ONE_ADD_DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC0 ONE_ADD_DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC0 ONE_ADD_DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC0 ONE_ADD_DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC0 ONE_ADD_DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC0 ONE_ADD_DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC0_COMP_CAL_CODE_A1 [220] ADC0_COMP_CAL_CODE_A2 [44] ADC0_COMP_CAL_CODE_A3 [2f]!
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::CALI_CHANNEL [0], Ma ADC_COMP_CAL_CODE_A1 [-2], ADC_COMP_CAL_CODE_A2 [4], ADC_COMP_CAL_CODE_A3 [2]!
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::s_adc_comp_ta [33]
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::read sys ctl die id 24 [0xe200], id 25 [0x9020], id 26 [0x2042]
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::CALI_CHANNEL [0], Mg ADC_COMP_CAL_CODE_A1 [-2], ADC_COMP_CAL_CODE_A2 [3], ADC_COMP_CAL_CODE_A3 [2]!
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::us_cur_temp [0x2], s_adc_comp_cal_tg [25]
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::|Mg - Ma| < 8, set Ma
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::CALI_CHANNEL [0], Write ADC_COMP_CAL_CODE_A1 [-2], ADC_COMP_CAL_CODE_A2 [4], ADC_COMP_CAL_CODE_A3 [2]!
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cap_cali::ADC0 CALI DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_dc_cali::ADC0 CALI DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC1 ONE_ADD_DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC1 ONE_ADD_DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC1 ONE_ADD_DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC1 ONE_ADD_DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC1 ONE_ADD_DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_auto_cali::ADC1 ONE_ADD_DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::CALI_CHANNEL [1], Ma ADC_COMP_CAL_CODE_A1 [-4], ADC_COMP_CAL_CODE_A2 [2], ADC_COMP_CAL_CODE_A3 [1]!
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::s_adc_comp_ta [33]
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::read sys ctl die id 24 [0xe200], id 25 [0x9020], id 26 [0x2042]
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::CALI_CHANNEL [1], Mg ADC_COMP_CAL_CODE_A1 [-4], ADC_COMP_CAL_CODE_A2 [2], ADC_COMP_CAL_CODE_A3 [1]!
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::us_cur_temp [0x2], s_adc_comp_cal_tg [25]
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::|Mg - Ma| < 8, set Ma
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cmp_cali_exception::CALI_CHANNEL [1], Write ADC_COMP_CAL_CODE_A1 [-4], ADC_COMP_CAL_CODE_A2 [2], ADC_COMP_CAL_CODE_A3 [1]!
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_cap_cali::ADC1 CALI DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_adc_dc_cali::ADC1 CALI DONE.
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_get_r_code::ul_reg_val [0x5e4]
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_find_dtc_cycle::pos[2]=114688, pos[0]=21845
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_find_dtc_cycle: pl_i_dc_offset = -3,uc_dtc_code=30
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_get_pwr_curve::BEFORE abnormal avoiding:uc_loop[0].
2019-02-27 23:29:52 <7> 2G txpower comp[0][0]:csw_ppa[17], csw_pa[0], upc[19],dtx[64].
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_get_pwr_curve::BEFORE abnormal avoiding:uc_loop[0].
2019-02-27 23:29:52 <7> 2G txpower comp[0][1]:csw_ppa[14], csw_pa[0], upc[18],dtx[64].
2019-02-27 23:29:52 <7> hi1151v2_rf_cali_get_pwr_curve::BEFORE abnormal avoiding:uc_loop[0].
2019-02-27 23:29:52 <7> 2G txpower comp[0][2]:csw_ppa[12], csw_pa[0], upc[17],dtx[64].
2019-02-27 23:29:53 <7> hi1151v2_rf_cali_find_dtc_cycle::pos[2]=112094, pos[0]=20953
2019-02-27 23:29:53 <7> hi1151v2_rf_cali_find_dtc_cycle: pl_i_dc_offset = 0,uc_dtc_code=29
2019-02-27 23:29:53 <7> hi1151v2_rf_cali_get_pwr_curve::BEFORE abnormal avoiding:uc_loop[0].
2019-02-27 23:29:53 <7> 2G txpower comp[1][0]:csw_ppa[17], csw_pa[3], upc[19],dtx[64].
2019-02-27 23:29:53 <7> hi1151v2_rf_cali_get_pwr_curve::BEFORE abnormal avoiding:uc_loop[0].
2019-02-27 23:29:53 <7> 2G txpower comp[1][1]:csw_ppa[15], csw_pa[3], upc[17],dtx[64].
2019-02-27 23:29:53 <7> hi1151v2_rf_cali_get_pwr_curve::BEFORE abnormal avoiding:uc_loop[0].
2019-02-27 23:29:53 <7> 2G txpower comp[1][2]:csw_ppa[13], csw_pa[3], upc[16],dtx[64].
2019-02-27 23:29:53 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:15 curtask:bbsp rectask:dhcp6s
2019-02-27 23:29:53 <7> dmac_cores_global_array_create: success to alloc g_ast_dmac_timestamp, size=120.
2019-02-27 23:29:53 <7> hwifi_get_edca_fix_cfg:: g_edca_mac_addr_cfg[0]=[98:XX:XX:XX:79:BE] up[0x66] down[0x0]
2019-02-27 23:29:53 <7> hwifi_get_edca_fix_cfg:: g_edca_mac_addr_cfg[1]=[AA:XX:XX:XX:EE:11] up[0x0] down[0x66]
2019-02-27 23:29:53 <7> hwifi_get_edca_fix_cfg:: g_edca_mac_addr_cfg[2]=[AA:XX:XX:XX:EE:12] up[0x66] down[0x21]
2019-02-27 23:29:53 <7> hwifi_get_edca_fix_cfg:: g_edca_mac_addr_cfg[3]=[34:XX:XX:XX:03:69] up[0x0] down[0x21]
2019-02-27 23:29:53 <7> hwifi_get_edca_fix_cfg:: g_edca_mac_addr_cfg[4]=[AC:XX:XX:XX:1A:55] up[0x0] down[0x21]
2019-02-27 23:29:53 <7> hwifi_get_edca_fix_cfg:: g_edca_mac_addr_cfg[5]=[34:XX:XX:XX:56:79] up[0x0] down[0x21]
2019-02-27 23:29:53 <7> hwifi_get_edca_fix_cfg:: g_edca_mac_addr_cfg[6]=[30:XX:XX:XX:C3:BC] up[0x0] down[0x21]
2019-02-27 23:29:53 <7> hwifi_get_edca_fix_cfg:: g_edca_mac_addr_cfg[7]=[1C:XX:XX:XX:20:6F] up[0x0] down[0x21]
2019-02-27 23:29:53 <7> hwifi_get_edca_fix_cfg:: g_us_mac_addr_num[8]
2019-02-27 23:29:53 <7> hwifi_get_wavap_mac_cfg:: g_ixia_mac_addr_cfg[0]=[AA:XX:XX:XX:00:00]
2019-02-27 23:29:53 <7> hwifi_get_wavap_mac_cfg:: g_ixia_mac_addr_cfg[1]=[AA:XX:XX:XX:00:01]
2019-02-27 23:29:53 <7> hwifi_get_wavap_mac_cfg:: g_us_mac_addr_num[2]
2019-02-27 23:29:53 <4>
2019-02-27 23:29:53 <4> The link of ETH0 is up, uni_phy
2019-02-27 23:29:53 <4>
2019-02-27 23:29:53 <4> eth0,status:f100
2019-02-27 23:29:53 <4> eth status changed: port 0, status 0
2019-02-27 23:29:54 <7> wiphy_register start.
2019-02-27 23:29:54 <7> wiphy_register start.
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:54 <3>
2019-02-27 23:29:54 <3>
2019-02-27 23:29:55 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3> INI_DRV:E]ini_readline_func:356]end of .ini file!!!
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3> INI_DRV:E]ini_find_var:724]have end of .ini file!!!
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <3>
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: total 16, n 5, 0 0
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 2402000, 2482000, 40000, 200, 2400, 0
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 5170000, 5250000, 80000, 200, 2300, 0
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 5250000, 5330000, 80000, 200, 2300, 16
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 5490000, 5730000, 80000, 200, 2300, 16
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 5735000, 5835000, 80000, 200, 2300, 0
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: total 16, n 4, 0 1
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 2402000, 2482000, 40000, 400, 2100, 0
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 5170000, 5250000, 80000, 400, 2300, 0
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 5250000, 5330000, 80000, 400, 2300, 16
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 5735000, 5835000, 80000, 400, 2300, 0
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: total 16, n 5, 0 2
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 2402000, 2482000, 40000, 400, 1900, 0
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 5170000, 5250000, 80000, 400, 1900, 0
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 5250000, 5330000, 80000, 400, 1900, 16
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 5490000, 5730000, 80000, 400, 2600, 16
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 5735000, 5835000, 80000, 400, 2600, 0
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: total 16, n 4, 0 3
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 2402000, 2482000, 40000, 400, 2100, 0
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 5170000, 5250000, 80000, 400, 1900, 0
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 5250000, 5330000, 80000, 400, 1900, 16
2019-02-27 23:29:55 <7> wal_regdb_print_db_rsv:: 5735000, 5835000, 80000, 400, 1900, 0
2019-02-27 23:29:55 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:15 curtask:os_nl_recv rectask:dnsmasq
2019-02-27 23:30:03 <7> 2g power_param:
2019-02-27 23:30:03 <7> 1506 9376 -916
2019-02-27 23:30:03 <7> 281 12888 -14214
2019-02-27 23:30:03 <7> 1536 9954 -1086
2019-02-27 23:30:03 <7> 313 15015 -20679
2019-02-27 23:30:03 <7> 1623 10511 -1908
2019-02-27 23:30:03 <7> 36 15420 -17485
2019-02-27 23:30:03 <7> 5g power_param:
2019-02-27 23:30:03 <7> 1576 615 726
2019-02-27 23:30:03 <7> 1297 2139 -1898
2019-02-27 23:30:03 <7> 1483 1838 -577
2019-02-27 23:30:03 <7> 1620 1276 -262
2019-02-27 23:30:03 <7> 1608 372 1535
2019-02-27 23:30:03 <7> 1441 -495 2882
2019-02-27 23:30:03 <7> 1559 1064 -203
2019-02-27 23:30:03 <7> 1641 -731 3377
2019-02-27 23:30:03 <7> 943 3321 -5211
2019-02-27 23:30:03 <7> 1226 1123 -1397
2019-02-27 23:30:03 <7> 1578 -281 2221
2019-02-27 23:30:03 <7> 1202 -52 1829
2019-02-27 23:30:04 <7> set acs sw=1
2019-02-27 23:30:04 <7> set acs sw=1 in dmac
2019-02-27 23:30:04 <7> set acs sw=1
2019-02-27 23:30:04 <7> set acs sw=1 in dmac
2019-02-27 23:30:04 <7> ar_max_tx_cnt = 3
2019-02-27 23:30:04 <7> alg_config_param::config_mode=90
2019-02-27 23:30:04 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:15 curtask:sh rectask:app_acs
2019-02-27 23:30:05 <4> @@@ cpu mode:0,special mode:1,domain id:0,real dev name:vap0
2019-02-27 23:30:06 <7> set start priv=1 in hmac
2019-02-27 23:30:06 <7> wal_netdev_open,dev_name is:vap0
2019-02-27 23:30:06 <7> hmac_init_scan_do::got=5:do scan mode=0 func=0xb type=1 ch_cnt=13
2019-02-27 23:30:07 <7> hmac_config_set_beacon::pst_mac_vap->st_cap_flag.bit_11ac2g=1, bit_disable_2ght40=0
2019-02-27 23:30:07 <7> set acs sw=1
2019-02-27 23:30:07 <7> set acs sw=1 in dmac
2019-02-27 23:30:07 <7> set acs sw=1
2019-02-27 23:30:07 <7> set acs sw=1 in dmac
2019-02-27 23:30:07 <7> ar_max_tx_cnt = 3
2019-02-27 23:30:07 <7> alg_config_param::config_mode=90
2019-02-27 23:30:07 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:15 curtask:sh rectask:app_acs
2019-02-27 23:30:09 <7> set start priv=1 in hmac
2019-02-27 23:30:09 <7> wal_netdev_open,dev_name is:vap0
2019-02-27 23:30:09 <7> hmac_init_scan_do::got=5:do scan mode=0 func=0xb type=1 ch_cnt=13
2019-02-27 23:30:09 <7> hmac_config_set_beacon::pst_mac_vap->st_cap_flag.bit_11ac2g=1, bit_disable_2ght40=0
2019-02-27 23:30:09 <6> warning: `/bin/write_proc' has both setuid-root and effective capabilities. Therefore not raising all capabilities.
2019-02-27 23:30:10 <4> @@@ cpu mode:0,special mode:1,domain id:4,real dev name:vap8
2019-02-27 23:30:10 <4> [3152] hi_policy_route_del_511x, error: hi_policy_route_get_inner[fc000100] pr_id=1005
2019-02-27 23:30:10 <4> [3152] hi_policy_route_del_511x, error: hi_policy_route_get_inner[fc000100] pr_id=2202
2019-02-27 23:30:10 <7> <<< rsp=5:scan report ch=13 bss=4 init=1
2019-02-27 23:30:10 <7> got init rank result [0 2 11] -  [1 0 36] init=1 for 1:1
2019-02-27 23:30:11 <7> set start priv=1 in hmac
2019-02-27 23:30:11 <7> wal_netdev_open,dev_name is:vap8
2019-02-27 23:30:11 <7> hmac_init_scan_do::got=5:do scan mode=0 func=0xb type=1 ch_cnt=13
2019-02-27 23:30:12 <7> hmac_config_set_beacon::pst_mac_vap->st_cap_flag.bit_11ac2g=1, bit_disable_2ght40=0
2019-02-27 23:30:12 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:9 curtask:sh rectask:hostapd
2019-02-27 23:30:12 <7> hmac_config_set_beacon::pst_mac_vap->st_cap_flag.bit_11ac2g=1, bit_disable_2ght40=0
2019-02-27 23:30:12 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:9 curtask:sh rectask:hostapd
2019-02-27 23:30:12 <7> hmac_config_set_beacon::pst_mac_vap->st_cap_flag.bit_11ac2g=1, bit_disable_2ght40=0
2019-02-27 23:30:12 <7> <<< rsp=5:scan report ch=13 bss=0 init=1
2019-02-27 23:30:12 <7> got init rank result [0 0 6] -  [1 3 149] init=1 for 0:0
2019-02-27 23:30:12 <7> cac not need, start bss
2019-02-27 23:30:13 <7> set start priv=1 in hmac
2019-02-27 23:30:13 <7> wal_netdev_open,dev_name is:vap0
2019-02-27 23:30:13 <7> hmac_init_scan_do::got=5:do scan mode=0 func=0xb type=1 ch_cnt=13
2019-02-27 23:30:13 <7> hmac_config_set_beacon::pst_mac_vap->st_cap_flag.bit_11ac2g=1, bit_disable_2ght40=0
2019-02-27 23:30:13 <7> set start priv=1 in hmac
2019-02-27 23:30:13 <7> wal_netdev_open,dev_name is:vap8
2019-02-27 23:30:13 <7> hmac_init_scan_do::got=5:do scan mode=0 func=0xb type=1 ch_cnt=13
2019-02-27 23:30:13 <7> hmac_config_set_beacon::pst_mac_vap->st_cap_flag.bit_11ac2g=1, bit_disable_2ght40=0
2019-02-27 23:30:15 <7> <<< rsp=5:scan report ch=13 bss=4 init=1
2019-02-27 23:30:15 <7> got init rank result [0 2 11] -  [1 0 36] init=1 for 1:1
2019-02-27 23:30:15 <7> <<< rsp=5:scan report ch=13 bss=0 init=1
2019-02-27 23:30:15 <7> got init rank result [0 0 6] -  [1 3 149] init=1 for 0:0
2019-02-27 23:30:15 <7> cac not need, start bss
2019-02-27 23:30:18 <4> set log file to:/var/console.log
2019-02-27 23:30:34 <6> squashfs_cache_init: sqcachesize=8.
2019-02-27 23:30:34 <4> cgroup: saf-huawei (8681) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
2019-02-27 23:30:34 <4> cgroup: saf-huawei (8681) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
2019-02-27 23:30:34 <4> cgroup: "memory" requires setting use_hierarchy to 1 on the root.
<14>[   79.340213] init: Console is alive
<14>[   79.340582] init: - preinit -
2019-02-27 23:30:35 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:9 curtask:1.sdk_init.sh rectask:sh
2019-02-27 23:30:35 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:9 curtask:1.sdk_init.sh rectask:sh
2019-02-27 23:30:35 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:9 curtask:1.sdk_init.sh rectask:sh
2019-02-27 23:30:35 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:9 curtask:1.sdk_init.sh rectask:sh
2019-02-27 23:30:35 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:9 curtask:1.sdk_init.sh rectask:sh
2019-02-27 23:30:35 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:9 curtask:1.sdk_init.sh rectask:sh
2019-02-27 23:30:35 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:9 curtask:1.sdk_init.sh rectask:sh
2019-02-27 23:30:35 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:9 curtask:1.sdk_init.sh rectask:sh
2019-02-27 23:30:35 <4> hw_wdt_ext_fiq_process ui_time=30
2019-02-27 23:30:37 <4> [hw_trace_signal_sendpm]pm_pid:1514 sig:15 curtask:lock rectask:lock
<13>[   82.550881] mount_root: mounting /dev/root
<14>[   82.559159] procd: - early -
<14>[   83.496755] procd: - ubus -
<14>[   84.509232] procd: - init -
2019-02-27 23:30:42 <4> masquerade init!
2019-02-27 23:30:43 <6> squashfs_cache_init: sqcachesize=8.
2019-02-27 23:30:44 <6> device vethGFWQY8 entered promiscuous mode
2019-02-27 23:30:44 <6> IPv6: ADDRCONF(NETDEV_UP): vethGFWQY8: link is not ready
2019-02-27 23:30:44 <6> lxcbr0: port 1(vethGFWQY8) entered forwarding state
2019-02-27 23:30:44 <6> lxcbr0: port 1(vethGFWQY8) entered forwarding state
2019-02-27 23:30:44 <6> lxcbr0: port 1(vethGFWQY8) entered disabled state
2019-02-27 23:30:44 <6> device veth1VVD2S entered promiscuous mode
2019-02-27 23:30:44 <6> IPv6: ADDRCONF(NETDEV_U
发表于 2019-2-28 07:43:53 | 显示全部楼层
你的019固件合并好了?
 楼主| 发表于 2019-2-28 17:31:56 | 显示全部楼层
709508002 发表于 2019-2-28 07:43
你的019固件合并好了?

没,刷不进去!!!
发表于 2019-2-28 18:07:29 | 显示全部楼层
看到了有 saf-huawei 及 procd、ubus。
补全shell 之后可以愉快的玩 OpenWRT。
发表于 2019-2-28 18:14:42 | 显示全部楼层
你的原先是有全shell 的,后来被你玩掉了是吗?

从你之前dump出来的数据来看,你的文件系统里面是有  hw_hardinfo_feature 这个文件的。
所以不负责任的胡乱猜测,你捅菊花15~20秒,恢复出厂,也许就又有了全shell 了。

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?注册

×
 楼主| 发表于 2019-2-28 18:26:00 | 显示全部楼层
achaoge 发表于 2019-2-28 18:14
你的原先是有全shell 的,后来被你玩掉了是吗?

从你之前dump出来的数据来看,你的文件系统里面是有  hw ...

真的吗?我去捅菊花下试试看!要是有的话就谢天谢地,谢谢您了!
 楼主| 发表于 2019-2-28 18:44:58 | 显示全部楼层
achaoge 发表于 2019-2-28 18:14
你的原先是有全shell 的,后来被你玩掉了是吗?

从你之前dump出来的数据来看,你的文件系统里面是有  hw ...

原来是补全shell的,被玩没了,记得是清了jffs2里边的所有文件,现在不进shell在WAP下输入一个忘记什么命令了还是能看到jffs2下还是有文件的!感谢你的回复
 楼主| 发表于 2019-2-28 19:03:10 | 显示全部楼层
achaoge 发表于 2019-2-28 18:14
你的原先是有全shell 的,后来被你玩掉了是吗?

从你之前dump出来的数据来看,你的文件系统里面是有  hw ...

不行啊,试了两次都一样,只剩下两个命令,shell下只剩下两个命令了!
发表于 2019-3-1 12:28:38 | 显示全部楼层
yuanxun9 发表于 2019-2-28 19:03
不行啊,试了两次都一样,只剩下两个命令,shell下只剩下两个命令了!

估计刷回固件应该可以了,试试8145v 补全shell的固件,就是更改了签名顺序的,主要是把 hw_hardinfo_feature 这个文件弄上去。
*滑块验证:
您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|小黑屋|宽带技术网 |网站地图 粤公网安备44152102000001号

GMT+8, 2025-6-23 02:06 , Processed in 0.042205 second(s), 6 queries , Redis On.

Powered by Discuz! X3.5 Licensed

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表