找回密码
 立即注册

QQ登录

只需一步,快速开始

查看: 5160|回复: 8

求助,怎么处理改错board了,一直循环求停止的方法

[复制链接]
发表于 2017-11-8 12:40:54 | 显示全部楼层 |阅读模式
HW module is installed
ifconfig eth0 hw ether D4:B1:10:E7:EC:77
Loading the EchoLife WAP modules: LDSP
COMMON For LDSP Install Successfully...
GPIO For LDSP Install Successfully...
HIGHWAY For LDSP Install Successfully...
------ SOC is 5115 H PILOT ------
<ldsp>board version is 19
<ldsp>pcb version is 0
<ldsp>orig board version is 3
CHIPADP-SD5115 BASIC For LDSP Install Successfully...
CHIPADP-SD5115 EXT For LDSP Install Successfully...
I2C For LDSP Install Successfully...
LSW L2 For LDSP Install Successfully...
LSW L3 For LDSP Install Successfully...
DEV For LDSP Install Successfully...
[DM]:ae_chip[0]=2,ae_chip[1]=255,ae_chip[2]=255,ae_chip[3]=0
[DM]:board_ver=19,pcb_ver=0
[DM]:Can not find pd file in /etc/wap/dm.cfg/pd_relation.cfg. [ui_board_ver=19]
Kernel panic - not syncing: [DM]Get product config file Error!
[<c0031da0>] (unwind_backtrace+0x0/0xfc) from [<c02d8810>] (panic+0x60/0xd8)
[<c02d8810>] (panic+0x60/0xd8) from [<bf1a2314>] (hw_dm_pd_static_attr_init+0xf0/0x124 [hw_smp_dm])
[<bf1a2314>] (hw_dm_pd_static_attr_init+0xf0/0x124 [hw_smp_dm]) from [<bf1a52a4>] (hw_dm_pd_attr_init+0x2c/0xe4 [hw_smp_dm])
[<bf1a52a4>] (hw_dm_pd_attr_init+0x2c/0xe4 [hw_smp_dm]) from [<bf19e08c>] (hw_dm_init_data+0x64/0x12c [hw_smp_dm])
[<bf19e08c>] (hw_dm_init_data+0x64/0x12c [hw_smp_dm]) from [<bf3d77b8>] (init_module+0xd0/0x2c0 [hw_dm_pdt])
[<bf3d77b8>] (init_module+0xd0/0x2c0 [hw_dm_pdt]) from [<c002b5b4>] (do_one_initcall+0x30/0x1c0)
[<c002b5b4>] (do_one_initcall+0x30/0x1c0) from [<c0073ba8>] (sys_init_module+0xc4/0x1f8)
[<c0073ba8>] (sys_init_module+0xc4/0x1f8) from [<c002c0e0>] (ret_fast_syscall+0x0/0x30)
Rebooting in 3 seconds..
发表于 2017-11-8 14:28:44 | 显示全部楼层
这个一般的无法停止,上编程器修吧
发表于 2017-11-8 16:36:03 | 显示全部楼层

------ SOC is 5115 H PILOT ------
<ldsp>board version is 19
<ldsp>pcb version is 0
<ldsp>orig board version is 3

这个看都看的出来
发表于 2017-11-8 17:59:12 | 显示全部楼层
19可能是他改错后的id呢。
发表于 2017-11-8 18:00:21 | 显示全部楼层
3对应啥型号?
 楼主| 发表于 2017-11-8 23:46:33 | 显示全部楼层
irc163 发表于 2017-11-8 08:36
------ SOC is 5115 H PILOT ------
board version is 19
pcb version is 0

我问怎么修复 我也晓得错了
发表于 2017-11-13 22:07:46 | 显示全部楼层
我的和你的情况一样,我的是8245C2的光猫,修砖刷的8120C的包,也是无限重启,你搞定了吗?我已经买了相同的路由器准备上编程器了
 楼主| 发表于 2017-11-15 11:13:53 | 显示全部楼层
yhy809980 发表于 2017-11-13 14:07
我的和你的情况一样,我的是8245C2的光猫,修砖刷的8120C的包,也是无限重启,你搞定了吗?我已经买了相同 ...

没有 你有编程器  把固件 读出来 我给你改了 刷回去 就好  我没编程器  非要 nand flash 你可以加我微信  chenwu150532648 备注 adsl论坛
*滑块验证:
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|小黑屋|宽带技术网 |网站地图 粤公网安备44152102000001号

GMT+8, 2025-9-9 17:24 , Processed in 0.024686 second(s), 5 queries , Redis On.

Powered by Discuz! X3.5 Licensed

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表