上海贝尔RG200o ca(白房子形状)无法ping/telnet通

海西

手头有个新版的RG200oca,错刷老版backupsettings.conf文件导致无法ping通和正常进入http://192.168.1.1设置界面,telnet也无法打开.

目前通过按住reset键开机可以ping通192.168.1.1

输入后http://192.168.1.1来到下面英文刷固件界面.
Tools-- Update Software

Step1: Obtain an updated software image file from yourISP.

Step2: Enter the path to the image file location inthe box below or click the "Browse" button to locate the image file.

Step3: Click the "Update Software" buttononce to upload the new image file.

NOTE: The update process takes about 2 minutes to complete, and your BroadbandRouter will reboot.

以下固件可刷,但故障依旧,请问
E200OCAA2V20M
E200OCAA2V10S

请问有硬件方式恢复出厂设置么?
例如reset键的操作方法~

jizzeng

背后的复位键长按也不行吗？能否把你那两个固件给我试试看能不能刷，谢谢