原来是d-link 2760u 1.04
直接升级到1.06成砖了！
网店老板说刷的固件带cfe所以成砖
网购他的usb转ttl线！
cfe可以进去，但不可以输入字符！
信息如下：
CFE version 1.0.37-102.9 for BCM96358 (32bit,SP,BE)
Build Date: Wed Jul 29 20:25:16 CST 2009 (kevin@BS5)
Copyright (C) 2000-2009 Broadcom Corporation.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 67108864 bytes (64MB)
Boot Address 0xbe000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.159
Gateway IP address :
Run from flash/host (f/h)
Default host run file name : 308nfs6358
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-5) : 96358VW2
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:1e:40:30:16:20
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
GPON Serial Number : "pqvlc"
GPON Password : " "
*** Press any key to stop auto
Auto run second count down: 0
web info: Waiting for connection on socket 0.
web info: Waiting for connection on socket 1.
web info: Waiting for connection on socket 0.
web info: Waiting for connection on socket 1.
web info: Upload 6320796 bytes, Broadcom image format.
CFE>
然后把网线接在lan1上！可以登陆cfe的更新界面！
在网店老板指点下！升级了 了一个带cfe的2760固件！
然后就卡在哪里！ping192.168.1.1不通！cfe信息如下！：
Flashing CFE: .
Flashing root file system and kernel at 0xbe020000: ............................
....................
.
*** Image flash done *** !
Resetting board...
CFE version 1.0.37-6.5 for BCM96358 (32bit,SP,BE)
Build Date: Sun Apr 26 00:57:24 CST 2009 (root@MOD6538)
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
Unknown PHY type
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 67108864 bytes (64MB)
Total memory used by CFE: 0x80401000 - 0x80528280 (1208960)
Initialized Data: 0x8041DB50 - 0x8041F980 (7728)
BSS Area: 0x8041F980 - 0x80426280 (26880)
Local Heap: 0x80426280 - 0x80526280 (1048576)
Stack Area: 0x80526280 - 0x80528280 (8192)
Text (code) segment: 0x80401000 - 0x8041DB4C (117580)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
*** Board is not initialized properly ***
Press: <enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
Board Id Name (0-7)
96358SV ------- 0
96358VW ------- 1
96358VW-16 ------- 2
96358GW ------- 3
96358GW2 ------- 4
96358GW-16 ------- 5
96358M ------- 6
96358VW2 ------- 7 : 7
再次登陆cfe信息如下！
CFE version 1.0.37-6.5 for BCM96358 (32bit,SP,BE)
Build Date: Sun Apr 26 00:57:24 CST 2009 (root@MOD6538)
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
Unknown PHY type
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 67108864 bytes (64MB)
Total memory used by CFE: 0x80401000 - 0x80528280 (1208960)
Initialized Data: 0x8041DB50 - 0x8041F980 (7728)
BSS Area: 0x8041F980 - 0x80426280 (26880)
Local Heap: 0x80426280 - 0x80526280 (1048576)
Stack Area: 0x80526280 - 0x80528280 (8192)
Text (code) segment: 0x80401000 - 0x8041DB4C (117580)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
*** Board is not initialized properly ***
Press: <enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
Board Id Name (0-7)
96358SV ------- 0
96358VW ------- 1
96358VW-16 ------- 2
96358GW ------- 3
96358GW2 ------- 4
96358GW-16 ------- 5
96358M ------- 6
96358VW2 ------- 7 : 7
依然是不能输入字符！也ping不通！我现在该怎么办啊！
|
粤公网安备44152102000001号 
发表于 2011-5-12 01:31:40