华为HG527-c超级密码破解不能输入用户名和密码

365663398

华为HG527-c无线路由相框猫超级密码破解方法：先是在淘宝上买的TTL刷机小板，然后按照网上的方法（如下括号内）已经操作到了输入用户名和密码的地方 ,可就是不知道怎么输入，请高手告诉我等到屏幕不动了以后该怎么操作，最好是详细点的操作步骤 。还有就是屏幕不动的最后一行是什么呢？请高手帮忙解答，我QQ365663398

《等到启动信息显示完，屏幕不动了，输入用户名和密码。

用户名!!Huawei

密码@HuaweiHgw（输入密码是看不见的）输完密码按回车。

然后输入start

在猫上插U盘

输入cp /var/curcfg.xml /mnt/usb1_1

（完整输入为:cp空格/var/curcfg.xml空格/mnt/usb1_1）

这样curcfg.xml文件就复制到U盘里了。

关闭路由电源，拔下U盘，把U盘插到电脑上，然后用记事本打开curcfg.xml文件，查找“username=bjcnchgw”，
后面有password=bjcnchgw+8个数字，这个 password后面的内容就是你的超级密码，不同机器不一样。就可以找全密码了。>>

365663398

刷机的时候需要插电话线和网线吗？
下面是猫的启动信息，插了电话线和网线，请高手指点！
v0.06 PLL w ln p08 zi

Solos 461x PP boot v1.5

SDRAM size = 0x2000000
Processor clock speed 264.0MHz
FLASH Chip ID: 017e

@@@@@@@@@@@@@Disable watchdog.
cd

Solos 461x Network boot v1.19 (00000000)  (FLASH)

MAC 00:22:33:44:55:66
SDRAM 0x02000000 bytes

Phy reset line on GPIO 4
192.168.1.1
Phy reset line on GPIO 4
(Hold '*' during reset for prompt)


Check multicast upgrade packets
Boot from Ethernet Port

v0.06 PLL w ln p08 zipacket, boot normally!

Solos 461x PP boot v1.5

SDRAM size = 0x2000000
Processor clock speed 264.0MHz
FLASH Chip ID: 017e

--- Check Tag CRC success,System Type: DUAL.

Start up info:

365663398

接上
ulFsOffset: e0000ulFsLen: 3399680  ulFsOffset: 917504
Finding flashfs partition...done.
PPB: image.a_magic = 0xea000006
PPB: image.a_text = 0x000012a0
PPB: image.a_data = 0x000b6990
PPB: image.a_bss = 0x0016e12c
PPB: image.a_syms = 0x00000000
PPB: image.a_entry = 0x00030020
PPB: image.a_trsize = 0x00000000
PPB: image.a_drsize = 0x00000000


Image 'image' is a Linux kernel
Trying to load initrd...none found
Calling Configure_NVS_FromFile.


Flash size is 0x01000000. sdram size = 0x02000000.
LZMA 4.05
init started:  BusyBox v1.00 (2009.09.01-02:46+0000) multi-call binary
RCS DONE
Loading Conexant BSP...
BASE MAC ADDRESS 00:22:33:44:55:66

Starting Conexant drivers
. msc16 loaded
.starting task turbo_WhipTask
DSL MSC16 imem 4096, dmem 2048

DSL MSC16 version 1.3
.msc16_load_file returned 0
sram_buffer : 0xffa01d60 addr : 0x70001d60
Passing command buffer 70001d60 to MSC16
.
Conexant drivers started
Loading Wireless ...

Load CX50321 Reading True PDA ...
Creating Delt char device
Loading drivers and kernel modules...

131
Waiting for cli start!| enter the msg
\===enter the log
-TSP_DBGetPara ok ulPort = 23
-----------CLI_Init------------
ulRet=0 in CLI_Init
|
Cwmp initing...
CWMP version: ATP cwmp v2.5
bootok

Welcome Visiting Huawei  Home Gateway
Copyright by Huawei Technologies Co., Ltd.
Login:Error -2 writing a1 of port AutoSRA:Disable

WIRELESS is off
port_no -1 not surported, br:br0, port:wl0.0
device wl0.0 is not a slave of br0
port_no -1 not surported, br:br0, port:wl0.1
interface wl0.1 does not exist!
port_no -1 not surported, br:br0, port:wl0.2
interface wl0.2 does not exist!
port_no -1 not surported, br:br0, port:wl0.3
interface wl0.3 does not exist!
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
Error while Setting SERVICESETError while Setting SERVICESETError while Setting
SERVICESET invalid rate , choosing auto mode
status  set or get BSS enabled status: up/down.

status  set or get BSS enabled status: up/down.

status  set or get BSS enabled status: up/down.


WIRELESS is on
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
file open failed, trying default file.

Let's go boy... :p


Get ethernet  flags....
Eth header is ready....
Arp header is ready....

Let's go boy... :p

Get ethernet  flags....
Eth header is ready....
Arp header is ready....
device eth0 is not a slave of br0

Connction id is 4
acCmd : echo "L:vpi=0/vci=100/rfc1483=true/rfc1483.mode=Llcbridged/class=ubr/por
t=a1" > /proc/quantum/drv_ctl
acCmd : echo "V:vpi=0:vci=100:conid=4" > /proc/quantum/drv_ctl
Call the function for bunif interface
Starting OAM test
Starting OAM test

V100R001C01 DNS Server V1.10

V100R001C01 DNS Server V1.10

Current sntp process is 732!

V100R001C01 SNTP Client V1.00

===bUsbconf=0====!

Current sntp process is 752!

V100R001C01 SNTP Client V1.00
paed: w         wpanone_in  No IV counter file available, starting from zero
Got interface ifname wl0
string = setoid wl0 10000002  ssid CU_gujZ
RSSID :ssid set done CU_gujZ

WIRELESS is on
wpa_supplicant: applet not found
DEVICE PIN: 45761652
wpa_supplicant: applet not found
104603 LAN1口接入设备:Computer
1970-1-1 0:2:16 Warning 104603 LAN1口接入设备:Computer
pppc -I ppp_0_100_1 connecting...
pppc -I ppp_0_100_1 117.86.200.174 connected.
104602 丢弃可能的非法连接
1970-1-1 0:2:46 Warning 104602 丢弃可能的非法连接
104602 丢弃可能的非法连接
1970-1-1 0:2:49 Warning 104602 丢弃可能的非法连接
main 1489: no sleep, use defalut
104602 丢弃可能的非法连接
2010-12-24 20:56:0 Warning 104602 丢弃可能的非法连接
104602 丢弃可能的非法连接
2010-12-24 20:56:1 Warning 104602 丢弃可能的非法连接
104602 丢弃可能的非法连接
2010-12-24 20:56:3 Warning 104602 丢弃可能的非法连接
104602 丢弃可能的非法连接
2010-12-24 20:56:9 Warning 104602 丢弃可能的非法连接