上海贝尔500-S6307MPw-II更新固件出现问题.求教!

zj45499

我的是3.7.1_ASB_REV042版本
我按照https://www.chinadsl.net/forum.php?mod=viewthread&;tid=21825
参考http://www..net/forum.php?mod=viewthread&;tid=22593&extra=&highlight=S6307MPW-II&page=2


可是用TFTP上传时 出现

然后我等了好几分钟 然后cd var
然后再upgrade -f /gaw7.img

出现连接断开

然后从此我的路由就wlan灯长亮. DSL灯无论如何都不亮 连接宽带是现实connecting through wan(PPope)
总之貌似是变砖了.. 可以挽救吗???

zj45499

想求下正常的MTD文件
和
恢复步骤的传送门(限中/英) 谢谢

zj45499

另外我看到这七步
1. Turn the router off.
2. Start the PCTool software.
3. Turn on the router.
4. Wait for approx 2-6 seconds (you only have a small window of opportunity here) OR until Windows says that the 'network' is connected.
5. Click on "Retrieve/Assign IP Address" and hope it finds the IP address of 192.168.1.1. If it doesn't find the address, you will need to repeat steps 1 to 5 several times until it does.
6. Once the PCTool has found the IP address correctly, select "flash" for media type, and "binary" for file type, and then "download" your "Firmware - Kernel/FS" to the router.
7. After this is successfully completed, change your Windows settings back from static IP address to automatic, and restart your router.

第六步的"and then "download" your "Firmware - Kernel/FS" to the router."
到底是要我做什么?

zj45499

....快弄好了..
现在需要MTD3 file 和 Environment File!!!!
有的上传一下
不胜感激!!!

zj45499

再问一下...
我的硬件是这样的
Flash : EN29LV640L-90TIP, 64 Megabit (4M x 16-bit ) CMOS 3.0 Volt-only
RAM  : ESMT. M12L128168A. Elite Semiconductor Memory Technology Inc. Publication Date: Mar. 2009. Revision: 2.3. 1/45. SDRAM. 2M x 16 Bit x 4 Banks

能不能刷带路由的固件?

zj45499

来人哪...帮帮忙....

ndir511

同感，我也需要，我的也是变砖了。。讨论QQ：153983100