本帖最后由 nodisk 于 2010-10-18 14:58 编辑
\TSP_DBGetPara ok ulPort = 23mand buffer 70001d60 to MSC16
-----------CLI_Ini
.
Conexant drivers st
|ulRet=0 in CLI_Init
Loading Wi
/l
Cwmp initing...
R
CWMP version: ATP cwmp v2.5
boot
WIRELESS is off 23
port_no -1 not surported, br:br0, port:wl0.0----
\ulRet=0
device wl0.0 is not a slave of br0
Cwmp initing...
CW
port_no -1 not surported, br:br0, port:wl0.1
bootok
Welcome Visiting Huawe
interface wl0.1 does not exist!
Copyright
port_no -1 not surported, br:br0, port:wl0.2
Login:Error -2
interface wl0.2 does not exist!ble
port_no -1 not surported, br:br0, port:wl0.3
port_no -1 not surported,
interface wl0.3 does not exist!
device wl
SIOCGIFFLAGS: Unknown error 19
p
SIOCGIFFLAGS: Unknown error 19,
Arp header is ready....
st
Let's go boy... :p enabled status: u
Get ethernet flags....
Eth header is ready....ed status: up/down.
Arp header is ready....
status se
device eth0 is not a slave of br0
Enable least pvc number function
Get ethern
Connction id is 4
acCmd : echo "L:vpi=88/vci=88/rfc1483=true/rfc14
Arp header is r
Call the function for bunif interfacenif interface
Starting OAM testting OAM test
Starting OAM testting OAM test
port_no -1 not surported, br:br0, port:wl0.0
acCmd : echo "L:vpi=0/vci=35/rfc1483=
port_no -1 not surported, br:br0, port:wl
t=a1" > /proc/quantum/drv_ctl
St
acCmd : echo "V:vpi=88:vci=89:conid=1" > /proc/quantum/drv_ctl
port_no -1 not surported, br:br0, port:wl0.0
Call the function for bunif interfaceo -1 not surported, br:br0, port:wl0.
Starting OAM test
Starting OAM testtion id is 1
Connction id is 1: echo "L:vpi=88/v
acCmd : echo "L:vpi=88/vci=90/rfc1483=true/rfc1483.mode=Llcbridged/class=ubr/por
t=a1" > /proc/quantum/dr
t=a1" > /proc/quantum/drv_ctl
acCmd : echo "V:vpi=88:v
acCmd : echo "V:vpi=88:vci=90:conid=1" > /proc/quantum/drv_ctl
Call the function for bu
Call the function for bunif interface
Starting OAM test
Starting OAM testg OAM t
acCmd : echo "V:v
rt=a1" > /proc/quantum/drv_ctluantum/drv_ctl
acCmd : echo "V:vpi=4:vci=4442:conid=1" > /proc/quantum/drv_ctl for bunif interface
Start
Call the function for bunif interfac
Init pvc
Connction id is 1
Conn
acCmd : echo "L:vpi=4/vci=4443/rfc1483=true/rfc1483.mode=Llcbridged/class=ubr/po83.mode=Llcbridged/class=ubr/po
rt=a1" > /proc/quantum/drv_ctl
rt=a1" > /proc/quantum/drv_ct
acCmd : echo "V:vpi=4:vci=4443:conid=1" > /proc/quantum/drv_ctlonid=1" > /proc/quantum/drv_ctl
Call the function for bunif interfacehe function for bunif interf
Connction
Connction id is 1
rt=a1" > /proc/quantum/drv_ctl4/rfc1483=true/rfc1483.mode=Ll
acCmd : echo "V:vpi=4:vci=4445:conid=1" > /proc/quantum/
rt=a1" > /proc/quantum/dr
Call the function for bunif interfaceCmd : echo "V:vpi=4:vci=4444:conid=1"
V100R001C01 DNS Server V1.10
V100R001C01 DNS Server V1.10Call the function for bunif
Current sntp process is 955!
Connction
V100R001C01 SNTP Client V1.00
SDRAM size = 0x2000000
===bUsbconf=0====!
Processor clock s
104603 LAN4口接入设备:Computer
@@@@@@@@@@@@@Dis
1970-1-1 0:2:35 Warning 104603 LAN4口接入设备:Computers 461x Network boot v1.19 (00000000) (FLASH)
104603 LAN4口接入设备:Computer
MAC 00:22:33:44:55:
1970-1-1 0:2:40 Warning 104603 LAN4口接入设备:Computer
Phy reset line on GPIO 4
104603 LAN4口接入设备:Computer
Phy reset line on GPIO 4
1970-1-1 0:2:49 Warning 104603 LAN4口接入设备:Computer
Check multicast u
fail set sockopt
104603 LAN1口接入设备:Computer Port
1970-1-1 0:3:7 Warning 104603 LAN1口?
Solos 461x PP boot
v0.06 PLL w ln p08 zi
SDRAM size = 0
Solos 461x PP boot v1.5
Processor clock s
SDRAM size = 0x2000000
PPB: image.a_trsize
Solos 461x PP boot v1.5
PPB
SDRAM size = 0x200000000000
Processor clock speed 264.0MHz is a Linux kernel
--- Check Tag CRC success,System Type: DUAL.ne found
C
Start up info: |
粤公网安备44152102000001号 
发表于 2010-10-18 11:16:28
发表于 2010-10-18 13:29:29