小猫本是DCHG 800A，别人刷的usr9113，CFE版本是：1.0.37-10.2
现在想改成别的固件，可是连上ttl后进入cfe状态下，从IE进192.168.1.1却找不到任何界面，也ping不通，台式机设置为192.168.1.100
想通过cfe的w命令刷，建了tftp服务器，可是在cfe底下联不上，现在非常烦躁！曾输入过 e n和C命令，不知道是否有什么地方改错了
CFE version 1.0.37-10.2 for BCM96358 (32bit,SP,BE)
Build Date: Tue Oct 23 15:23:12 CDT 2007 (root@mns.linux.usr)
Copyright (C) 2000-2007 U.S. Robotics Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
Unknown PHY type
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 67108864 bytes (64MB)
Total memory used by CFE: 0x80401000 - 0x80528410 (1209360)
Initialized Data: 0x8041D790 - 0x8041FC40 (9392)
BSS Area: 0x8041FC40 - 0x80426410 (26576)
Local Heap: 0x80426410 - 0x80526410 (1048576)
Stack Area: 0x80526410 - 0x80528410 (8192)
Text (code) segment: 0x80401000 - 0x8041D784 (116612)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1
Host IP address : 192.168.1.40
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcmDSL-2760U_cfe_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : 96358GW-A
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:03:0f:0f:7f:23
Country code : all
PSI Size (1-64) KBytes : 64
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 1
web info: Waiting for connection on socket 0.
CFE> w 192.168.1.55:bcmDSL-2760U_cfe_fs_kernel
Loading 192.168.1.55:bcmDSL-2760U_cfe_fs_kernel ...
Loading failed.: CFE error -21
*** command status = -21
CFE> |
粤公网安备44152102000001号 
发表于 2010-9-16 23:18:38
发表于 2010-9-17 13:17:37