求助M29W128 FLASH芯片的RG100A-AA用新的brjtag17j软件JTAG不成功,麻烦大家帮我看下

hyc900202 · 发表于 2009-9-5 11:13:16

这是我刷机的图片，哎没成功哦希望大家帮我看下啊无法写入CFE，CFE是用的hotqj的

haxc · 发表于 2009-9-5 11:18:27

要断电了再连接rg100才可以再次刷

henglijituan · 发表于 2009-9-5 14:11:53

断电了再连接

yy5409 · 发表于 2009-9-6 12:32:32

可以指定芯片型号然后强刷，不过这个版本的JTAG软件是有这个可以读不可以写的问题！！！

天涯 · 发表于 2009-9-6 15:08:43

1.7M版的软件出来了,用它再试试看.

kylinsun · 发表于 2009-9-7 14:41:18

C:\bj>brjtag -probeonly /erasechip

===============================================
Broadcom EJTAG Debrick Utility v1.7p-hugebird
===============================================

Probing bus ... Done

Instruction Length set to 5

CPU running under BIG endian

CPU Chip ID: 00000110001101011000000101111111 (0635817F)
*** Found a Broadcom BCM6358 Rev 1 CPU chip ***

- EJTAG IMPCODE ....... : 00000000100000011000100100000100 (00818904)
- EJTAG Version ....... : 1 or 2.0
- EJTAG DMA Support ... : Yes
- EJTAG Implementation flags: R4k MIPS16 MIPS32

Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Done
Halting Processor ... <Processor Entered Debug Mode!> ... Done
Clearing Watchdog ... Done
Loading CPU Configuration Code ... Skipped
Detecting Flash Window Base ...
Read MPI Register value : 1f00008c
Possible Flash Access Base Addr : 1f000000

Probing Flash at (Probe Address: 0x1f000000) ...
Detected Chip ID with AMD/Spansion Routine (VenID:DevID = 207e : 2101)
*** Found a ST M29W128GH Uni (16MB) Flash Chip ***

Operation will take 1 or 2 minutes. Don't break!!!
Erasing whole chip ... Done!

hugebird · 发表于 2009-9-7 16:00:06

6# kylinsun

https://www.chinadsl.net/thread-38123-1-2.html
可否试一下链接里面的CFE，把启动log帖一下，如果启动正常的话，是可以刷自己编译的第3方固件的

kylinsun · 发表于 2009-9-9 15:58:53

本帖最后由 kylinsun 于 2009-9-9 10:41 编辑

CFE version 1.0.37-6.5 for BCM96358 (32bit,SP,BE)
Build Date: Sun Sep  6 15:58:50 CST 2009 ([email=root@MOD6538]root@MOD6538[/email])
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
Auto-negotiation timed-out
10 MB Half-Duplex (assumed)
** Image information not found. **
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE:  0x80401000 - 0x805282F0 (1209072)
Initialized Data:       0x8041DBD0 - 0x8041F9F0 (7712)
BSS Area:                0x8041F9F0 - 0x804262F0 (26880)
Local Heap:             0x804262F0 - 0x805262F0 (1048576)
Stack Area:             0x805262F0 - 0x805282F0 (8192)
Text (code) segment:    0x80401000 - 0x8041DBC8 (117704)
Boot area (physical):    0x00529000 - 0x00569000
Relocation Factor:       I:00000000 - D:00000000
Board IP address                : 192.168.1.1
Host IP address                : 192.168.1.100
Gateway IP address             :
Run from flash/host (f/h)       : f
Default host run file name       : vmlinux
Default host flash file name    : bcm963xx_fs_kernel
Boot delay (0-9 seconds)       : 1
Board Id Name                   : 96358VW2
Psi size in KB                   : 24
Number of MAC Addresses (1-32) : 12
Base MAC Address                : 12:34:56:ab:cd:ef
Ethernet PHY Type                : Internal
web info: Waiting for connection on socket 0.
CFE>

请问刷那个固件？

账号		自动登录	找回密码
密码			注册

求助M29W128 FLASH芯片的RG100A-AA用新的brjtag17j软件JTAG不成功,麻烦大家帮我看下

本帖子中包含更多资源