華為HS520s 信道 問題

anthonyko

HG520s> show all

RAS version: V100R001B016             2007/04/27
System   ID: 2.7.2.68(RUE0.C2)3.5.19.9     [Apr 12 2007 04:15:49]
romRasSize: 1330120
system up time:     0:06:09 (906f ticks)
bootbase version: VTC1.12 | 2006/8/16

Hostname        = HG520s
Message         = <empty>
ip route mode   = Yes
bridge mode     = Yes
DHCP setting:
  DHCP Mode      = Server
  Client IP Pool Starting Address = 192.168.1.2
  Size of Client IP Pool = 10
  Primary DNS Server     = 0.0.0.0
  Secondary DNS Server   = 0.0.0.0
  DHCP server leasetime  = 259200
TCP/IP Setup:
  IP Address     = 192.168.1.1
  IP Subnet Mask = 255.255.255.0
  Rip Direction  = None
    Version      = Rip-1
  Multicast      = IGMP-v2

RemoteNode     = 0
Rem Node Name  = ISP-0(ISP)
Encapsulation  = PPPoE
Multiplexing   = LLC-based
Channel active = Yes
VPI/VCI value  = 8/81
IP Routing mode= Yes
Bridge mode    = No
PPP Username   = ****************

PPP Password   = ****************
PPP Username_ext2   =
PPP Password_ext2   =
Service name   = china
Remote IP Addr        = 0.0.0.0
Remote IP Subnet Mask = 0.0.0.0
IP address assignment type = Dynamic
SUA            = Yes
Multicast      = IGMP-v2
Default Route node            = Yes

RemoteNode     = 1
Rem Node Name  = ISP-1
Encapsulation  = RFC 1483
Multiplexing   = LLC-based
Channel active = Yes
VPI/VCI value  = 8/35
IP Routing mode= No
Bridge mode    = Yes
Remote IP Addr        = 0.0.0.0
Remote IP Subnet Mask = 0.0.0.0
IP address assignment type = Dynamic
SUA            = No
Multicast      = None
Default Route node            = No

RemoteNode     = 2
Rem Node Name  = ISP-2
Encapsulation  = RFC 1483
Multiplexing   = LLC-based
Channel active = Yes
VPI/VCI value  = 0/32
IP Routing mode= No
Bridge mode    = Yes
Remote IP Addr        = 0.0.0.0
Remote IP Subnet Mask = 0.0.0.0
IP address assignment type = Dynamic
SUA            = No
Multicast      = None
Default Route node            = No

RemoteNode     = 3
Rem Node Name  = ISP-3
Encapsulation  = RFC 1483
Multiplexing   = LLC-based
Channel active = Yes
VPI/VCI value  = 8/32
IP Routing mode= No
Bridge mode    = Yes
Remote IP Addr        = 0.0.0.0
Remote IP Subnet Mask = 0.0.0.0
IP address assignment type = Dynamic
SUA            = No
Multicast      = None
Default Route node            = No

RemoteNode     = 4
<empty>
RemoteNode     = 5
Rem Node Name  = ISP-5
Encapsulation  = RFC 1483
Multiplexing   = LLC-based
Channel active = Yes
VPI/VCI value  = 0/100
IP Routing mode= No
Bridge mode    = Yes
Remote IP Addr        = 0.0.0.0
Remote IP Subnet Mask = 0.0.0.0
IP address assignment type = Dynamic
SUA            = No
Multicast      = None
Default Route node            = No

RemoteNode     = 6
<empty>
RemoteNode     = 7
<empty>