kissbbs2007 发表于 2007-7-4 11:47:38

speedtouch homeplus 511如何查看线路状况？

10.0.0.138进出不知道是哪一项，都点过了也没看到。

kissbbs2007 发表于 2007-7-4 12:13:11

speedtouch homeplus 511如何查看线路状况？


是不是这个，全英文的看不懂。

yihui2003 发表于 2007-7-5 08:16:08

tytang 发表于 2007-7-7 17:58:19

speedtouch homeplus 511如何查看线路状况？

就是那个properties！

morfell 发表于 2007-7-7 20:53:13

speedtouch homeplus 511如何查看线路状况？

诊断那里

kissbbs2007 发表于 2007-7-8 06:47:44

speedtouch homeplus 511如何查看线路状况？

没用了，这个猫坏了，DX又给换了个白卧的831，一个太监猫。

njly01 发表于 2007-7-9 20:48:28

speedtouch homeplus 511如何查看线路状况？

被骗了，这种极品猫电信都会说坏了。

kissbbs2007 发表于 2007-7-9 23:45:59

speedtouch homeplus 511如何查看线路状况？

确实是坏了，本来就是之前的猫坏了，才换的511，511那个dsl灯不良。

em3322 发表于 2008-12-21 02:37:02

dong342819 发表于 2009-9-11 06:16:23

本帖最后由 dong342819 于 2009-9-10 22:20 编辑

Diagnostics



   Expand All
Collapse All



    System   



Product Name = SpeedTouch 510
Vendor Name = THOMSON
Software Version = 4.2.7.16.0
Serial Number = 85B13N5
CLI Version = 1.2.0
Bootloader Version = Not retrievable
ASIC Version = 1b01
Board Name = ADNT-Q
Modem Label Version = 2.11.36

    Lan   



      Ethernet


    Interface name = eth0
    Physical address =

       Physical Interface
      Mode = forwarding
      Auto Negotiation = Yes
      Type = 100BaseTFD
      kBytes Tx/Rx = 48422 / 3008
      Frames Tx/Rx = 38725 / 25815
      Discarded frames = 2


    Wan   



      Dsl


    DSL Flavour = ADSL over POTS
    Reserved Bandwidth (kbit/s) up/down = 640 / 3072
    Uptime = 00:18:24
    kBytes Tx/Rx = 4180 / 55176

       Properties
      Output Power (dBm) up/down = 12.0 / 19.0
      Attenuation (dB) up/down = 11.0 / 18.0
      Noise Margin (dB) up/down = 16.0 / 31.0
      Vendor Id (local/remote) = ALCB / GSPN


       Statistics
      Loss of signal (local/remote) = 0 / 0
      Loss of power (local/remote) = 0 / 0
      Loss of framing (local/remote) = 0 / 0
      Errored Seconds (local/remote) = 0 / 1
      Loss of link (remote) = 0


      Connections   



       PPPoE_1
      Connection Type = PPPoE
      kBytes Tx/Rx = 2325 / 47149
      Username =****
      Password = ****
      Access Concentrator =
      Service Name =
      Last Connection Error = None
      Uptime = 00:18:20

         IP Connectivity   
      Ping Address = 202.101.224.69
      Ping Address Description = Primary DNS server (specified by IPCP)
      Ping Roundtrip Time (in msec) = 37
      Ping Packetsize (in bytes) = 20


         IP
      Local IP Address = 59.55.61.12
      Remote IP Address = 59.55.60.1
      Other IP Addresses = Not Configured
      Primary DNS = 202.101.224.69   
      Secondary DNS = 202.101.226.68
      MTU Size = 1492
      Address Translation = pat
      UnicastPackets Tx/Rx = 24312 / 36545
      BroadcastPackets Tx/Rx = 0 / 0
      Packets Dropped = 0


         PPP
      Username =
      Password = ********
      MRU Size = 1492
      Admin. State = up
      Oper. State = up
      Link State = connected
      LCP State = opened
      IPCP State = opened
      Retry interval = 10


         PPPoE
      Service Name = jxcard
      Access Concentrator =   


         RELAY
      Interface Admin. State = Up
      PPPoE relay session id = 1 (client)
      Relay portlist

          format: ETH Intf (Status) [-> Phonebook Name(Address,QoS [,autoconfigured])]
          1. ETHoA_1 (up) -> PVC_1 (0.35, ubr)
          2. eth0 (up)



         Ethernet
      Interface Name = ETHoA_1
      Interface Type = ETHoA
      Interface Admin. State = connected


         ATM
      Phonebook Name = PVC_1
      Address = 0.35
      Encapsulation = llc/snap
      Auto Configured = no
      QoSbook Name = default
      QoS Type = ubr
页: [1]
查看完整版本: speedtouch homeplus 511如何查看线路状况？