我擦 rg100a -aa 刷2760 iptv 如此简单想哭啊
本帖最后由 wangzhe110 于 2012-3-19 20:23 编辑居然主要设置
ATM PVC Configuration
This screen allows you to configure an ATM PVC identifier (VPI and VCI), select DSL latency, select a service category. Otherwise choose an existing interface by selecting the checkbox to enable it.
VPI:
VCI:
Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge.)
EoA
PPPoA
IPoA
Encapsulation Mode:LLC/SNAP-BRIDGING VC/MUX
Service Category: UBR Without PCRUBR With PCRCBRNon Realtime VBRRealtime VBR
Peak Cell Rate:
Sustainable Cell Rate:
Maximum Burst Size:
Select Connection Mode
Default Mode - Single service over one connection
VLAN MUX Mode - Multiple Vlan service over one connection
选择这个 MSC Mode - Multiple Service over one Connection
Enable Quality Of Service
Enabling packet level QoS for a PVC improves performance for selected classes of applications.QoS cannot be set for CBR and Realtime VBR.QoS consumes system resources; therefore the number of PVCs will be reduced. Use Advanced Setup/Quality of Service to assign priorities for the applications.
Enable Quality Of Service.
其他按照正常设置 然后开
LAN Ports Configuration
Use this page to enable/disable the Virtual LAN Ports feature.
打勾保存
LAN Port
ENET1
ENET2
ENET3
ENET4
USB
wlan0
哈哈哈哈哈 看的不是很明白,哈哈 哥哥,那么,这个打印机该如何设置啊?
谢谢 本帖最后由 39566 于 2012-5-8 09:50 编辑
楼主itv是dhcp方式吗?还是pppoe啊?我刷了2760 itv不能看,用dhcp方式。 E文看不懂哦!看着猫,画老虎! 选择这个 MSC Mode - Multiple Service over one Connection
EOA模式
我的也是刷了2760看不成ITV节目 不播,只有节目单。也向你你一样设置了,还是看不成,我正在努力多试几次!每设置一下让路由重启一下 对了我的甘肃兰州的,网上查的VPI VCI是0 32可是还是不行,明天了再问下电信吧! 我是苏州的。也用2760U的1.07版本。看电视(dhcp方式)、上网都很稳定啊。楼主这个方法我没试过。不过我的设置里面要做一个组播的,我是将LAN2口和无线2口绑定我们当地ITV的端口就可以了。
页:
[1]
2