jadi 发表于 2011-11-9 00:29:25

高手们来帮看看如何给TP406改NR285PB提高CPU频率 附TTL启动信息

本帖最后由 jadi 于 2011-11-9 00:31 编辑

高手们来帮看看如何给TP406改NR285PB提高CPU频率
先看TTL启动信息
Booting...
=============================
<Probe SPI #0 >
1.Manufacture ID=0x000000c2
2.Device ID=0x00000020
3.Capacity ID=0x00000015
4.MXIC SPI (2 MByte)!
5.Total sector-counts = 512(sector=4KB)
6.spi_flash_info.device_size = 21

---RealTek(RTL8196C)at 2011.01.07-12:11+0800 version v1.0a (195MHz)
uncompress_app 1
uncompress_app 2
uncompress_app 3
uncompress_app 4
uncompress_app 5
Jump to image start=0x80700000...
jump to init
gpio init
watchdog enable
UUID check OK
checksum OK
init check OK
Loading Run Parameters...
Parameters Are Blank!
Loading Default Parameters...
para size 1KB
IGD-R1A2-V1.1.19CN-Netcore(NR285PB), IGD software for NR285PB, V1.1.19 Simplifie
d Chinese version, 2011.01.07 12:15.<br>Copyright(c) by Netcore Technology Co.Lt
d. All rights reserved.
LAN_IP=192.168.1.1,unusemem=1154KB

CPU频率被降低了一半   
就这B
https://www.chinadsl.net/data/attachment/forum/201107/01/1108167f7i118vf1fyvj68.jpg

michaeltam 发表于 2011-11-9 18:02:41

这个没点焊接技术真搞不好啊，而且还的飞线

lin5230118 发表于 2013-8-29 16:28:36

你好.可以发我285P的TTl接法么？我现在也在研究.谢谢..
页: [1]
查看完整版本: 高手们来帮看看如何给TP406改NR285PB提高CPU频率 附TTL启动信息